Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

TIG Welding Rod Types and Uses

ER70S-6 covers mild steel and ER308L covers stainless, and this guide sorts the families by metal, diameter and pack size so the rod matches the joint.

TIG Welding Rod Types and Uses
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1INDULWARD ER70S-6 TIG Welding Rod 1/16" x 16"INDULWARD ER70S-6 TIG Welding Rod 1/16" x 16"9.7/10View on Amazon
  2. 2Convivium ER308L Stainless Steel TIG Welding RodsConvivium ER308L Stainless Steel TIG Welding Rods9.6/10View on Amazon
  3. 3Verdanzia 60 Pcs Stainless Steel Tig Welding RodVerdanzia 60 Pcs Stainless Steel Tig Welding Rod9.6/10View on Amazon
  4. 4UNIFAMILY 1LB TIG Welding Rod ER70S-6UNIFAMILY 1LB TIG Welding Rod ER70S-69.6/10View on Amazon

A stainless handrail needs a clean bead that keeps its corrosion resistance at the joint, while a cracked mild steel bracket on a trailer needs a rod that copes with a little rust and mill scale. Each job calls for tig welding rod types matched to the base metal, and the match matters more than the brand on the pack. Mild steel rods suit mild and low alloy steel, stainless rods suit stainless, and the rods here share the same diameter, so the choice comes down to metal, shielding gas and pack size.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

INDULWARD ER70S-6 TIG Welding Rod 1/16" x 16"

INDULWARD ER70S-6 TIG Welding Rod 1/16" x 16"

Indulward9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5.5 lb pack of ER70S-6 mild steel rods, about 400 rods at 1/16 inch by 16 inches, made for mild steel with rust, oil or mill scale still on it.

Pros

  • Higher silicon and manganese content helps fight porosity on rusty or oily steel
  • 5.5 lb pack holds about 400 rods for a run of farm and trailer repairs
  • Smooth arc start and stable puddle, even on less than perfect steel surfaces
  • Works with argon or argon and CO2 shielding gas on standard TIG machines

Cons

  • Mild steel only, so stainless joints need a separate ER308L rod
  • Only 1/16 inch diameter, with no thicker size for heavier joints
  • A 5.5 lb pack is a lot to store if you weld only now and then
  • No warranty term is stated
Convivium ER308L Stainless Steel TIG Welding Rods

Convivium ER308L Stainless Steel TIG Welding Rods

Convivium9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 piece set of low carbon ER308L stainless rods at 1/16 inch by 16 inches, made for 304 and 308 family stainless steels and cold service work.

Pros

  • States compatibility with 304, 304L, 308, 308L, 321 and 347 stainless steels
  • Low carbon ER308L chemistry suits general stainless work and cryogenic service
  • Stable arc start with low spatter and a smooth bead
  • A 3/32 inch size is also listed for stainless sheet and tubing

Cons

  • Only 10 rods in the set, so a long job needs more than one set
  • Stainless only, so mild steel joints need a separate rod
  • No pack weight is stated
  • Thin sheet and tubing are its stated sweet spot, so it is sized for thin work rather than heavy joints
Verdanzia 60 Pcs Stainless Steel Tig Welding Rod

Verdanzia 60 Pcs Stainless Steel Tig Welding Rod

Verdanzia9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60 piece set of ER308L stainless rods at 1/16 inch by 16 inches, made for corrosion resistant stainless welds in construction, shipbuilding and home shop work.

Pros

  • 60 rods in the set, enough for a run of stainless joints without reordering
  • ER308L composition resists corrosion and high temperatures, per the maker
  • Smooth arc starts with a stable arc and a clean, slag free finish
  • Uniform 1/16 inch size helps control heat on detailed or thin work

Cons

  • Stainless only, so mild steel joints need a separate rod
  • Only 1/16 inch diameter, with no thicker size for heavier joints
  • No pack weight is stated
  • No shielding gas is stated
UNIFAMILY 1LB TIG Welding Rod ER70S-6

UNIFAMILY 1LB TIG Welding Rod ER70S-6

UNIFAMILY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 lb pack of copper plated ER70S-6 mild steel rods at 1/16 inch by 16 inches, made for mild and low alloy steel on standard TIG machines.

Pros

  • Copper plated surface resists rust on the rod itself
  • Smooth welds with stable arc and less spatter, per the maker
  • Runs with an argon and carbon dioxide mix or 100% CO2 shielding gas
  • Light 1 lb pack suits a small job or a first try at TIG filler rod

Cons

  • Mild steel only, so stainless joints need a separate rod
  • Only 1/16 inch diameter, with no thicker size for heavier joints
  • A 1 lb pack runs out fast on a run of repairs
  • No warranty term is stated

TIG welding rod types at a glance

Two alloy families cover the TIG work in this guide. ER70S-6 is the mild steel rod, for mild and low alloy steel, and it copes with light rust, oil and mill scale. ER308L is the stainless rod, a low carbon filler for 304 and 308 family stainless steels, and it keeps its corrosion resistance at the joint. The filler must match the base metal, so the metal picks the rod, not the other way around.

All four rods here are 1/16 inch in diameter, which suits thin sheet, small diameter tubing and pipe root passes. The difference is the alloy and the pack: mild steel or stainless, and a 10 piece set, a 1 lb pack, a 5.5 lb pack or a 60 piece set. See the best TIG welder guide for machines that run these rods.

The four rods side by side

Rod Alloy Diameter Length Pack Gear Score
INDULWARD ER70S-6 5.5 LB ER70S-6 1/16 in 16 in 5.5 lb, approx. 400 rods 9.7/10
Convivium ER308L 10-Pack ER308L 1/16 in 16 in 10 rods 9.6/10
Verdanzia ER308L 60-Pack ER308L 1/16 in 16 in 60 rods 9.6/10
UNIFAMILY ER70S-6 1 LB ER70S-6 1/16 in 16 in 1 lb 9.6/10

Sort by alloy first, then by pack: ER70S-6 for mild steel, ER308L for stainless.

ER70S-6: the mild steel rod

ER70S-6 is the rod for mild and low alloy steel, and the higher silicon and manganese in the wire help it cope with light rust, oil and mill scale. Both mild steel rods in this guide are 1/16 inch in diameter, and both run on standard TIG machines. The UNIFAMILY pack states an argon and carbon dioxide mix or 100% CO2 as shielding gas, while the INDULWARD pack states argon or argon and CO2. Use the gas the rod maker states. The TIG welding gas types guide explains argon, helium and CO2.

The choice between the two mild steel packs is how much rod you burn. The 1 lb UNIFAMILY pack suits a small job, while the 5.5 lb INDULWARD pack, about 400 rods, suits steady repair work on farm equipment, trailers and tanks.

ER308L: the stainless rod

ER308L is the rod for stainless steel, and the low carbon chemistry keeps the joint corrosion resistant after welding. Convivium states compatibility with 304, 304L, 308, 308L, 321 and 347 stainless steels, and both stainless rods here are 1/16 inch by 16 inches. Convivium states pure argon or an argon and helium mix as shielding gas, while Verdanzia states no shielding gas, so confirm the gas first. For a deeper look at stainless filler, see the best filler rod for TIG welding 304 stainless.

The two stainless sets differ in pack and stated service. The Convivium set holds 10 rods and states cryogenic temperature service, while the Verdanzia set holds 60 rods and states corrosion resistance in acidic and saline conditions, such as marine work. Pick the small set for a single stainless job and the 60 piece set when stainless work comes up often.

Picking the diameter and the pack

Diameter sets how much filler each dip can add to the puddle. A 1/16 inch rod feeds a small puddle, which is what thin sheet and small tubing need, and all four rods here come in that size. Convivium also lists a 3/32 inch size, so check the size at order time. The TIG welding wire sizes chart lays out the diameters.

Pack size decides how often you reorder. A 10 piece set or a 1 lb pack covers a short job, a 60 piece set covers a run of stainless joints, and a 5.5 lb pack of about 400 rods covers steady mild steel repair work. Buy the alloy first and the pack second.

TIG arc and gas safety. A TIG arc gives off intense ultraviolet light, so wear a welding helmet and keep skin covered. Shielding gas displaces air in a closed space, so weld with ventilation and keep cylinders upright and chained.

The rods in this guide

Once the base metal picks the alloy, these four sets are ranked by how completely each one states its alloy, size, gas and pack.

FAQ for welders

What TIG rod do I use for mild steel?

Use ER70S-6, the mild steel filler rod in this guide. It suits mild and low alloy steel, and its silicon and manganese content helps it cope with rust, oil and mill scale.

What TIG rod do I use for 304 stainless steel?

Use ER308L, the low carbon stainless filler rod. Convivium states ER308L for 304, 304L, 308, 308L, 321 and 347 stainless steels, so it covers 304 and its low carbon twin.

Can I use ER70S-6 on stainless steel?

No. ER70S-6 is a mild steel rod, and a mild steel bead on stainless loses the corrosion resistance the stainless was chosen for. Keep ER70S-6 for mild steel and reach for ER308L on stainless.

What gas do I use with TIG filler rods?

It depends on the rod. The Convivium ER308L rod (on Amazon) states pure argon or an argon and helium mix, and the INDULWARD ER70S-6 rod (on Amazon) states argon or argon and CO2. The UNIFAMILY ER70S-6 rod (on Amazon) states an argon and carbon dioxide mix or 100% CO2.

What diameter TIG rod should I start with?

A 1/16 inch rod is a sound start for thin sheet, small diameter tubing and pipe root passes, and all four rods here come in that size. Convivium also lists a 3/32 inch size, so check the diameter at order time.

How many rods come in a pack?

It varies by pack. The Convivium set holds 10 rods, the Verdanzia set holds 60 rods, the UNIFAMILY pack weighs 1 lb, and the INDULWARD pack weighs 5.5 lb and holds about 400 rods.

Related: welding consumables, best filler rod for TIG welding 304 stainless, best TIG welder, TIG welding wire sizes, and the TIG aluminum filler rod chart.

More buying guides

Welding Consumables ·

Hardfacing Welding Rod Types for Wear Repairs

Hardfacing welding rod types split into manganese rods that work-harden under impact and hard deposits that resist abrasion, with sizes, packs and application notes.