Water Cooled TIG Torch Setup: Hoses, Power Cable and First Checks
A water cooled TIG torch setup connects a 250 Amp torch to power, gas and water through color-coded hoses, and this guide walks through each connection in order.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SÜA - 20 Series - 250 Amp - Water Cooled9.5/10View on Amazon - 2
STARTECWELD TIG 20 250 Amp Water Cooled TIG Torch9.5/10View on Amazon - 3
SÜA - Power Cable for 20 Series Water-Cooled TIG9.4/10View on Amazon
A long bead on thick stock heats a torch fast, and an air cooled torch soon gets too hot to hold. A water cooled TIG torch setup moves that heat away through water lines, so the torch stays cool enough to keep welding. The setup is a torch, a power cable, a gas hose and water hoses, each with its own connection, and this guide walks through each connection in order.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

SÜA - 20 Series - 250 Amp - Water Cooled
A 250 Amp water cooled TIG torch on a 25 foot 3-piece cable, with a torch head accessory kit and gas and water connectors sized by the maker.
Pros
- 250 Amp WP-20 torch with a 25 foot 3-piece cable
- Torch head accessory kit included in the box
- Gas and water connectors sized by the maker: 5/8 in-18 R.H. gas and 5/8 in-18 L.H. water
- 7/8 in-14 L.H. cable connection fits Dinse 35-70 plugs
Cons
- 250 Amp rating, so 350 Amp work calls for the 18 series torch
- Other parts might be needed to connect argon and water lines
- 7.0 lb torch and cable to carry around the shop
- No warranty term is stated

STARTECWELD TIG 20 250 Amp Water Cooled TIG Torch
A 250 Amp water cooled TIG torch with a 25 foot 3-piece cable, a Dinse 35-70 connector and an accessory kit with tungsten.
Pros
- 250 Amp WP20 torch with a 25 foot 3-piece cable
- Dinse 35-70 connector/adaptor included
- Accessory kit with collet, collet body, alumina nozzle, back cap and 3/32 in tungsten
- Heavy-duty nylon cable cover on the 25 foot cables
Cons
- 250 Amp rating sets a ceiling on the work
- Accessory kit gives 3/32 in tungsten and no other size
- 25 foot cable takes floor space in a small shop
- No warranty term is stated

SÜA - Power Cable for 20 Series Water-Cooled TIG
A 25 foot super flex red braided power cable for 20 series water cooled TIG torches, red for power in the maker's color code.
Pros
- 25 foot super flex braided cable for 20 series torches
- Part of the maker's color-coded set: red for power, blue for water, black for gas
- Fits WP-20 torches at 250 Amp and WP-18 torches at 350 Amp
- Available in 12.5 and 25 feet
Cons
- Cable only, so the torch, water hose and gas hose come separately
- No torch head or consumables in the box
- Lengths are 12.5 and 25 feet, with no length between them
- 4.0 lb of cable to route and hang
Water Cooled TIG Torch Setup in Order
Start with the torch in hand and the cooler off. The torch end of the cable carries the power, gas and water lines together, and each line has its own fitting, so match each fitting to its mate before anything is tightened.
The SÜA WP-20 gives its connections by size: a 7/8 in-14 L.H. cable connection for power, a 5/8 in-18 R.H. gas hose connector and a 5/8 in-18 L.H. water hose connector. The gas hose connector goes to the flowmeter or to the gas outlet on a welder with a gas solenoid, and the water hose connector goes to the water hose coupler or to a TIG water cooler. The STARTECHWELD torch (on Amazon) takes a different path: a Dinse 35-70 connector/adaptor on the end of its 25 foot cable.
The power cable is the red line in the set. SÜA color-codes the hoses red for power, blue for water and black for gas, and the 45V04-R is the red super flex braided power cable for 20 series torches. It fits WP-20 torches at 250 Amp and WP-18 torches at 350 Amp. Confirm the torch series and the adaptors and couplers before ordering, as the maker asks.
What each hose and cable does
The power cable carries the welding current to the torch, the gas hose carries argon to the cup, and the water hoses carry water to the torch head and back to the cooler.
The 3-piece cable bundles the power, gas and water lines into the lead from the torch to the welder. The SÜA WP-20 and the STARTECHWELD WP20 ship on 25 foot 3-piece cables, and the SÜA 45V04-R (on Amazon) is the red power cable of the set. Keep the gas and water lines on their own fittings: the gas fitting is right hand thread and the water fitting is left hand thread on the SÜA torch.
Side by side
| SÜA WP-20-25R | STARTECHWELD WP20 | SÜA 45V04-R | |
|---|---|---|---|
| Type | 250 Amp water cooled TIG torch | 250 Amp water cooled TIG torch | Power cable for 20 series torches |
| Amperage | 250 Amp | 250 Amp | 250 Amp (WP-20), 350 Amp (WP-18) |
| Cable length | 25 ft, 3-piece | 25 ft, 3-piece | 25 ft |
| Connectors | 7/8 in-14 L.H. cable, 5/8 in-18 R.H. gas, 5/8 in-18 L.H. water | Dinse 35-70 connector/adaptor | Not stated |
| Accessory kit | Torch head accessory kit included | Collet, collet body, alumina nozzle, back cap, 3/32 in tungsten | Not stated |
| Cable cover | Not stated | Heavy-duty nylon | Super flex red braided |
| Item weight | 7.0 lb | Not stated | 4.0 lb |
| Warranty | Not stated | Not stated | Not stated |
The table leaves the choice to the torch in hand: the SÜA WP-20 gives every connection by size, the STARTECHWELD WP20 adds the Dinse connector and tungsten to the kit, and the SÜA cable is the spare power lead for a 20 or 18 series torch.
The gear for this setup
The torch does the welding and the cable carries the power, and the setup needs the fittings to match, so here are the 3 pieces for the job.
If the welder is still to buy, the best TIG welder guide and the best TIG torch picks cover the machine and the torch.
Checks before the first bead
With the torch hooked up, look over every connection before the cooler runs. Check that the gas hose sits on the flowmeter or gas outlet, the water hoses sit on the cooler couplers, and the power cable sits on its adapter. Look for water at the couplers and listen for gas at the cup, then check the STARTECHWELD torch head kit: collet, collet body, alumina nozzle, back cap and 3/32 in tungsten.
Other parts might be needed to connect the argon and water lines to the welder, the flowmeter and the water recirculation system, as the SÜA torch notes, so gather the adaptors and couplers before the job starts. If a fitting does not match, stop and check the torch series before ordering. Follow the welder manual for the gas and water hookups.
Water and power share the torch lead, so keep the connections dry and the cables clear of hot metal. Weld with ventilation, keep flammable material clear of the arc, and secure gas cylinders upright.
FAQ for welders
Can I use a 20 series torch on a 350 Amp job?
No. The WP-20 is a 250 Amp torch, and the 350 Amp work belongs to the 18 series. The SÜA power cable fits WP-20 torches at 250 Amp and WP-18 torches at 350 Amp, so the cable crosses over and the torch does not.
What do the red, blue and black hoses connect to?
Red is power, blue is water and black is gas. The SÜA set color-codes the lines that way, and the 45V04-R is the red power cable. Match each color to its fitting: the gas fitting is right hand thread and the water fitting is left hand thread on the SÜA torch.
Do I need a Dinse plug to connect the torch?
It depends on the torch. The STARTECHWELD WP20 ships with a Dinse 35-70 connector/adaptor, and the SÜA WP-20 gives a 7/8 in-14 L.H. cable connection that fits Dinse 35-70 plugs. Check the connection the torch gives and match the plug to it.
What comes in the torch head accessory kit?
The STARTECHWELD kit gives a collet, collet body, alumina nozzle, back cap and 3/32 in tungsten. The SÜA WP-20 states that a torch head accessory kit is included. Other parts might be needed to connect the argon and water lines, so check the kit on arrival.
Related: water cooled tig torch setup, best TIG welder, best TIG torch, TIG welding torch types, air cooled vs water cooled TIG torch, and the TIG welders hub.




