WP 17 vs WP 26 TIG Torch: Which Should You Choose?
WP 17 vs WP 26 TIG torch: a 150A WP-17 torch against an 81-piece WP-17/18/26 accessories kit, compared on what each listing actually states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bestarc TIG Welding Torch, Flexible Head9.4/10View on Amazon - 2
81PCS TIG Welding Torch Accessories WP17/18/269.3/10View on Amazon
Verdict. Pick the WP-17 side if you need the torch itself: the Bestarc WP-17FV is a 150A air-cooled torch with a flexible head, gas valve and 13 ft of cable. Pick the WP-26 side if you need consumables: the AWLOLWA listing is an 81-piece accessories kit of glass cups, alumina nozzles and a stubby gas lens that fits WP-17, WP-18 and WP-26 torches. Note the asymmetry: this round pairs a torch against a parts kit, not a pair of torches, so compare them as complementary buys rather than rivals.
WP 17 vs WP 26 TIG torch is a common comparison, and the listings here show both series share consumables: the accessories kit fits WP-17, WP-18 and WP-26 torches. The listings tell a lopsided story, though: a complete WP-17 torch facing a WP-17/18/26 accessories kit. This comparison covers what each listing states and where the comparison runs out.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The listings

Bestarc TIG Welding Torch, Flexible Head
A 150A air-cooled WP-17 TIG torch with flexible head, gas valve, 13 ft cable and 3.2 ft gas hose, rated for 0.5 to 2.4 mm electrodes.
Pros
- 150A air-cooled torch with lift TIG function
- Flexible head plus gas valve on the torch body
- 13 ft power cable and 3.2 ft gas hose included
- Ribbed ergonomic handle with nylon-braided copper cable
Cons
- No duty cycle stated
- No warranty term stated
- No safety certification stated
- Compatibility list centers on Bestarc welders

81PCS TIG Welding Torch Accessories WP17/18/26
An 81-piece TIG torch accessories kit with glass cup, alumina nozzles and stubby gas lens #12, fitting WP-17, WP-18 and WP-26 torches.
Pros
- 81 pieces: glass cup, alumina nozzles, stubby gas lens #12
- Fits WP-17, WP-18 and WP-26 torches
- Copper electrode clips
- 1 pound, easy to keep with the welder
Cons
- Not a torch: no amperage, cable or gas valve
- Insulating rings may not match the CK torch
- No warranty term stated
- No safety certification stated
Other welders and gear to compare
RIVERWELD SR WP 17 18 26 TIG Welding Torch Back Cap 57Y02Check price on Amazon
RIVERWELD WP-17F SR-17F TIG Welding Torch Head Body withCheck price on Amazon
Weldpro Digital TIG ACDC 250GD AC DC 250 Amp Tig/Stick WelderCheck price on Amazon
Weldpro 200A AC/DC TIG Welder with PulseCheck price on Amazon
RIVERWELD TIG Gas Lens Collet Bodies 45V64 10N24 3/32" 53N87Check price on Amazon
YESWELDER TIG TorchCheck price on Amazon
WP 17 vs WP 26 TIG torch: side by side
| Model | Gear Score | What it is | Amperage | Cable and hose | Electrode size | Head | Weight |
|---|---|---|---|---|---|---|---|
| Bestarc WP-17FV TIG Torch | 9.4/10 | 150A air-cooled TIG torch | 150A | 13 ft power cable, 3.2 ft gas hose | 0.5 to 2.4 mm | Flexible, with gas valve | 2.68 pounds |
| AWLOLWA 81-Piece TIG Kit | 9.3/10 | 81-piece accessories kit | Not stated (consumables) | Not applicable | Not stated | Not applicable | 1 pound |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 18 October 2026. Neither listing states a CSA, UL or ETL listing, a duty cycle or a warranty term.
What the WP-17 listing states
The Bestarc WP-17FV is a 150A air-cooled TIG torch with lift TIG function. It carries a flexible head that adjusts to welding angles, a gas valve on the torch body, a ribbed ergonomic handle, a 13 ft power cable and a 3.2 ft gas hose, with quick plug connector 10-25mm2 and gas line connection 5/8″-18 RH. Electrode size runs 0.5 to 2.4 mm. The cable uses rubber with a nylon braid over stranded copper. It weighs 2.68 pounds. The listing names compatibility with the Bestarc MIG145, MIG165, ARC200 and most MIG welders.
What the WP-26 side listing states
The AWLOLWA listing is not a torch at all: it is an 81-piece accessories kit with a glass cup, alumina nozzles and a stubby gas lens #12 kit, with copper electrode clips. The listing says it fits WP-17, WP-18 and WP-26 torches, and notes the insulating rings may not match the CK torch. It weighs 1 pound. No amperage, cable, gas valve or electrode size is stated, because it is consumables, not a torch.
The lopsided bit: torch against consumables
A head-to-head needs torches on each side, and here the torch sits only on the WP-17 side. Do not read the kit’s lack of an amperage rating or cable as a loss for the WP-26 side: those specs belong to torches, and this listing is cups and clips. The useful read is compatibility: the kit fits WP-17, WP-18 and WP-26 torches, so it serves whichever torch you own, including the Bestarc WP-17FV on the other side of this comparison. If you came here choosing between a WP-17 and a WP-26 torch, the deciding specs are not in these listings; see our best TIG torch picks for torch-to-torch comparisons.
Buying advice: pair the torch with the kit
Since the 2 listings cover different halves of the setup, the practical buy is often both: the torch to weld with and the kit to keep it fed. Here is how to read the stated specs before you check out.
Start with what the torch gives you
The Bestarc WP-17FV is a 150A air-cooled torch with lift TIG function, so it suits a scratch or lift-start machine without a high-frequency box. The flexible head adjusts to tight joint angles, and the gas valve on the torch body lets you control shielding gas at the torch rather than at the bottle. Electrode size runs 0.5 to 2.4 mm at the 150A rating. The 13 ft power cable and 3.2 ft gas hose keep the argon bottle parked while you move around the work, and the cable runs rubber with a nylon braid over stranded copper for conductivity and durability. It weighs 2.68 lb, and the listing names compatibility with the Bestarc MIG145, MIG165 and ARC200 plus most MIG welders, so confirm your machine’s torch connection matches the 10-25mm2 quick plug and the 5/8″-18 RH gas line connection before ordering.
Then stock the consumables
The AWLOLWA kit is 81 pieces of torch wear parts: a glass cup, alumina nozzles and a stubby gas lens #12, with copper electrode clips. The stubby gas lens is the standout for a beginner, since a gas lens smooths shielding gas flow and forgives a slightly long stickout. The listing says the kit fits WP-17, WP-18 and WP-26 torches, which means it serves the Bestarc WP-17FV on the other side of this comparison as well as any WP-26 torch you may own. Note 2 things the listing itself flags: the insulating rings may not match the CK torch, and the spec table lists a part number of TIG 63PCS against the 81-piece title, so count the pieces on arrival. The kit weighs 1 pound in a 7.5 x 5.1 x 1.4 in box, light enough to live in the welding cart drawer.
Check compatibility before checkout
Buy the torch if you need the torch, and buy the kit if you burn through cups and nozzles. The kit’s stated fit covers WP-17, WP-18 and WP-26, so a single kit feeds a mixed shop. If you are choosing between a WP-17 and a WP-26 torch body rather than between a torch and a kit, these listings do not settle it: neither states a duty cycle, and the kit states no amperage at all. Compare torch-to-torch specs in our TIG torch roundup instead.
FAQ for welders
Is the WP-26 side a torch?
No. The AWLOLWA listing on the WP-26 side is an 81-piece accessories kit: glass cup, alumina nozzles and a stubby gas lens #12, with copper electrode clips. It fits WP-17, WP-18 and WP-26 torches but contains no torch.
What amperage is the Bestarc WP-17FV rated for?
150A, air-cooled, with lift TIG function. Electrode size runs 0.5 to 2.4 mm.
Will the accessories kit fit my WP-17 torch?
Per the listing, yes: it fits WP-17, WP-18 and WP-26 torches. The listing notes the insulating rings may not match the CK torch.
Does the Bestarc torch need a separate gas hose?
No. The listing includes a 3.2 ft gas hose alongside the 13 ft power cable, plus a gas valve on the torch body.
Which side should a beginner buy?
The torch if you lack a torch; the kit if you own a WP-17, WP-18 or WP-26 torch and burn through cups and nozzles. They are complementary, not competing, buys.
Related: our best TIG torch picks, air-cooled vs water-cooled TIG torch, best TIG gas lens kit and gas lens vs standard TIG collet body.
Scoring, line by line
Each listing is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Neither listing states a safety certification or a warranty term, so each scores zero there and the ranking comes from performance, build and value. The torch outscores the kit because a complete torch covers more of the job.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bestarc WP-17FV TIG Torch | 9.4 | 28 | 21 | 19 | 0 | 0 |
| AWLOLWA 81-Piece TIG Kit | 9.3 | 23 | 19 | 20 | 0 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.
Before you strike an arc. Wear a helmet with the right shade for the process and amperage, safety glasses underneath, leather gloves and flame resistant clothing. Weld with good ventilation, clear anything flammable from the area, and keep an extinguisher close. See the OSHA welding overview and our welding safety gear checklist for beginners.




