Band Saw Replacement Parts Guide
Tires, blades and belts keep a portable band saw cutting straight: match the size and part number to your saw, then stretch the tire on with no adhesive.

On this page
A band saw that throws its blade mid-cut usually needs band saw replacement parts, not a new saw: the rubber tires on the wheels wear, crack and let the blade slip. This guide covers the parts that wear out on a portable band saw, how to match them to your saw by size and part number, and how to fit them. The examples below come from tire and belt listings for common portable saws.
As an Amazon Associate I earn from qualifying purchases. This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Band saw replacement parts in one paragraph
The parts that wear on a portable band saw are the rubber tires on the drive wheels, the blade itself, and the drive belt. Tires grip the blade and keep it tracked; when they crack or glaze, the blade slips and pops off. Blades wear dull and snap. Belts stretch and slip. Match each part by size and part number: the tires in these listings measure 6 inches outside diameter and 1/2 inch wide, and the 45-69-0010 tires fit blades that run 44-7/8 inches.
Side by side
| 650721-00 tires | 45-69-0010 tires | What to check | |
|---|---|---|---|
| Outside diameter | 6 in | 6 in | Same size on both |
| Width | 1/2 in | 1/2 in | Same size on both |
| Blade length | Not stated | 44-7/8 in | Check the manual |
| Fits | DeWalt DWM120, DCS374 | Milwaukee 6225, 6230, 6232 and more | Match the part number |
| Pack | 4 tires | 2 or 4 tires | 2 tires per change |
| Install | Stretch on, no adhesive | Stretch on, no adhesive | Replace both at once |
Both tire types measure the same size, so the part number decides the fit: 650721-00 covers DeWalt portable saws, and 45-69-0010 covers Milwaukee deep-cut saws plus DeWalt and Porter-Cable models. Check the part number on your old tire or in the manual before you order.
When to replace the tires
- Blade slips or pops off. A cracked or glazed tire lets the blade wander and come off the wheel.
- Cracks you can see. Old rubber dries and cracks, and a cracked tire will not hold the blade true.
- One tire is worn. Two tires are needed on the saw, so replace both at the same time when one wears out.
- Regular checks. Check the belt regularly and replace it when worn to keep power transmission steady.
How to match a tire to your saw
Start with the part number: 650721-00 fits DeWalt DWM120 and DCS374 saws, and 45-69-0010 fits Milwaukee 6225, 6230 and 6232-20 saws, plus DeWalt DW328 and DW329 and Porter-Cable 725, 726 and 7723 models. Then check the size: both types measure 6 inches outside diameter and 1/2 inch wide. Then check the power: the 45-69-0010 tires fit electric corded band saws and do not fit cordless portable band saws. Packs run 2 or 4 tires. See the types of band saws guide if you are not sure which saw you own.
Blades and drive belts
The 45-69-0010 tires fit blades that run 44-7/8 inches. A dull blade cuts slow and wanders, so swap it when it stops cutting clean. The drive belt kit for the same saws comes as a 2-pack of rubber belts with an anti-slip texture, made to keep power transmission steady and cut vibration. Check the belt when you change tires, and replace it when worn. Our best band saw blades 44 7/8 roundup covers blades in this length.
How to fit a tire
No adhesive is needed. Stretch the tire to fit the wheel tightly during installation, then check that it sits even all round before you fit the blade. If one tire is worn, replace both at the same time. Fit the blade, check the tracking, and cut a scrap piece before you go back to work.
Guards and gloves. Keep guards in place, wear eye and face protection, clamp the work, and keep gloves away from rotating parts. Unplug the saw before you change a tire, blade or belt. See the OSHA machine guarding page.
FAQ for welders
What size are portable band saw tires?
The tires in these listings measure 6 inches outside diameter and 1/2 inch wide. Both the 650721-00 and the 45-69-0010 tires share that size, so the part number, not the size, decides which one fits your saw. Measure your old tire if the part number is gone.
How do I know which tire fits my saw?
Match the part number first: 650721-00 fits DeWalt DWM120 and DCS374 saws, and 45-69-0010 fits Milwaukee 6225, 6230 and 6232-20 saws plus DeWalt and Porter-Cable models. Check the size next, then check the power: the 45-69-0010 tires fit electric corded saws and do not fit cordless portable saws. When in doubt, check the manual for your saw model.
Should I replace both tires at once?
Yes. Two tires are needed on the saw, and the listings advise replacing both at the same time when one is worn. A new tire on one wheel and a worn tire on the other tracks unevenly, so a pair keeps the blade running true.
What blade length do these saws take?
The 45-69-0010 tires fit blades that run 44-7/8 inches. Check your saw manual for the blade length your model takes, since blade length varies by saw. A blade of the wrong length will not tension or track right.
Do band saw tires need adhesive?
No. The tires stretch to fit the wheel tightly during installation, and no adhesive is required. If a tire feels loose on the wheel, check the size and part number before you fit the blade. A tire that will not stay put is worn out or the wrong size.
How often should I check the belt?
Check the belt regularly and replace it when worn, per the tire listings. A worn belt slips and loses drive, and a fresh belt keeps power transmission steady. Inspect tires and belts together when you change a blade.
Related: best band saw blades 44 7/8, types of band saw blades, how to sharpen band saw blades, and the metal fab tools hub.




