Welding Helmet Replacement Parts: What to Buy
Welding helmet replacement parts keep a hood in service: an auto-darkening cartridge, outer and inner cover lenses, and a face shield visor for shield owners, with the sizes and fit to check before ordering.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
JustHot Welding Helmet Lens Auto Darkening True9.7/10View on Amazon - 2
ARCCAPTAIN 6Pcs Normal Viewing Screen Outer9.5/10View on Amazon - 3
Face Shield Replacement Lens Compatible9.4/10View on Amazon - 4
ARCCAPTAIN Large Viewing Screen Outer Replacement9.4/10View on Amazon
A scratched lens, a cracked cover or a dead auto-darkening cartridge ends a welding session fast, and the fix is usually a single part rather than a new hood. Welding helmet replacement parts are the pieces that wear out: outer cover lenses that take the spatter, inner cover lenses that sit behind the cartridge, and auto-darkening cartridges that switch shade with the arc. A tinted visor for a face shield is a separate part, not a helmet part, and this guide covers one for shield owners as well. This guide shows which part each pick replaces, the size and fit to check, and how to match the part to the hood.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

JustHot Welding Helmet Lens Auto Darkening True
An auto-darkening true color replacement lens, 4.49 by 5.24 inches, with 4 arc sensors and shade DIN 5-9/9-13, solar powered with a replaceable lithium battery.
Pros
- 4 arc sensors with a fast light-to-dark switch
- Top 1/1/1/1 optical clarity with true color technology
- Adjustable shade DIN 5-9/9-13 with sensitivity and delay knobs
- Solar powered with a replaceable lithium battery
Cons
- Made for a 4.49 by 5.24 inch window, so measure the opening before ordering
- Shade tops out at DIN 13, so check the shade the work needs
- No spare outer cover lens is stated in the box
- Single lens only, so a spare means another order

ARCCAPTAIN 6Pcs Normal Viewing Screen Outer
A set of 6 outer and 3 inner replacement lenses for the ARCCAPTAIN HSH-S800 helmet, with the outer lens at 4.85 by 3.88 inches and the inner lens at 4.24 by 1.81 inches.
Pros
- 6 outer lenses and 3 inner lenses in one set
- Outer lens measures 4.85 by 3.88 inches, inner lens 4.24 by 1.81 inches
- Made to fit the ARCCAPTAIN HSH-S800 helmet
- A spare set on hand means a scratched cover lens is a quick swap
Cons
- Fits the HSH-S800 only, so it does not fit other helmets
- Cover lenses only, so the auto-darkening cartridge is a separate part
- No warranty term is stated
- The set covers one helmet, so another hood needs its own set

Face Shield Replacement Lens Compatible
A dark tinted polycarbonate face shield lens, 15.5 by 8 inches and 0.04 inch thick, made for the Hobart 770580 shield and for cutting, welding and grinding.
Pros
- 15.5 by 8 inch lens gives full face coverage
- Polycarbonate lens resists scratches, impacts, wear and chemical splashes
- Dark tint cuts glare without losing clarity
- Made for the Hobart 770580 shield, with a quick swap fit
Cons
- Made for the Hobart 770580 face shield, so it does not fit other shields
- A tinted visor only, so it is not an auto-darkening cartridge
- Single lens in the pack, so a spare means another order
- The maker also claims it fits most standard face shields, so check the shield size before ordering

ARCCAPTAIN Large Viewing Screen Outer Replacement
A large viewing screen outer replacement lens for the ARCCAPTAIN LY-800J welding helmet, 3.9 by 5.3 inches.
Pros
- Made to fit the ARCCAPTAIN LY-800J helmet
- Large viewing screen size at 3.9 by 5.3 inches
- Outer lens takes the spatter so the cartridge behind it stays clear
- Replaces only the outer screen, so the rest of the helmet stays as it is
Cons
- Fits the ARCCAPTAIN LY-800J only, so it does not fit other helmets
- Outer lens only, so the inner lens is a separate part
- No warranty term is stated
- Sold as a single lens, so a spare means another order
Welding Helmet Replacement Parts: What to Replace First
Start with the part that fails. The outer cover lens sits in front of the auto-darkening cartridge and takes the spatter, so it clouds first and needs the most frequent swap. The inner cover lens sits behind the cartridge and lasts longer. The cartridge itself is the part to replace when the shade stops switching or the view stays dark. A tinted face shield lens is a different part again: it is the whole visor for a face shield, not a cover for a helmet cartridge.
Cover lenses are the quick fix: a fresh outer lens clears the view without touching the cartridge. When the cartridge itself fails, the whole auto-darkening lens comes out and a new one goes in, matched to the window size. The face shield visor is a separate case: it is the shield itself, so the size and the shield model have to match.
The Replacement Parts
These are the replacement parts in this guide, ranked by Gear Score, with a cartridge, a cover lens set, a face shield lens and a single outer lens.
Side by Side
| Type | Size | Fits | |
|---|---|---|---|
| JustHot JH-8000EE | Auto-darkening lens | 4.49 by 5.24 inches | Helmets with a 4.49 by 5.24 inch window |
| ARCCAPTAIN HSH-S800 | Outer and inner lenses | Outer 4.85 by 3.88 inches, inner 4.24 by 1.81 inches | ARCCAPTAIN HSH-S800 |
| Feekoon Shield Lens | Tinted face shield lens | 15.5 by 8 inches | Hobart 770580 face shield |
| ARCCAPTAIN LY-800J | Outer lens | 3.9 by 5.3 inches | ARCCAPTAIN LY-800J |
The sizes tell the story: the JustHot cartridge and the ARCCAPTAIN cover lenses fit helmet windows, while the Feekoon visor (on Amazon) is a full face shield lens at 15.5 by 8 inches. Check the size against the hood window before ordering, since a lens that does not match the opening does not fit.
How to Match a Lens to Your Hood
Match the part to the hood first, then the size. The ARCCAPTAIN lenses (on Amazon) here are made for one helmet each: the LY-800J lens fits the LY-800J, and the HSH-S800 set fits the HSH-S800. The JustHot cartridge measures 4.49 by 5.24 inches, so it fits helmets with a window opening of that size, and the Feekoon visor fits the Hobart 770580 face shield. Measure the window opening and compare it with the size the maker lists before ordering.
- Model match. A lens made for the LY-800J fits the LY-800J, and a lens made for the HSH-S800 fits the HSH-S800.
- Window size. Measure the opening and compare it with the size the maker lists.
- Shade. The JustHot cartridge covers DIN 5-9/9-13, so check the shade the work needs.
For more options, see our welding helmets guides.
FAQ for welders
How do I know which replacement lens fits my helmet?
Match the model first: a lens made for the LY-800J fits the LY-800J, and a lens made for the HSH-S800 fits the HSH-S800. Then check the size: the JustHot cartridge measures 4.49 by 5.24 inches and fits helmets with a window opening of that size, while the ARCCAPTAIN outer lenses measure 4.85 by 3.88 inches and 3.9 by 5.3 inches. Measure the window opening before ordering.
What is the difference between an outer and an inner replacement lens?
The outer lens sits in front of the auto-darkening cartridge and takes the spatter, so it is the lens that clouds first. The inner lens sits behind the cartridge and shields it from the inside. The ARCCAPTAIN HSH-S800 (on Amazon) set here holds 6 outer lenses and 3 inner lenses, with a lens for each side of the cartridge.
Do I need an auto-darkening lens or a cover lens?
It depends on what failed. A cover lens is the part to replace when the view clouds but the shade still switches. An auto-darkening lens is the part to replace when the shade stops switching. The JustHot lens (on Amazon) here is a full auto-darkening cartridge with 4 arc sensors and shade DIN 5-9/9-13, while the ARCCAPTAIN lenses here are cover lenses only.
What shade range does the JustHot replacement lens cover?
The JustHot lens covers DIN 5-9/9-13, with a light shade of 4 and sensitivity and delay knobs to tune it to the work. Check the shade the work needs against that range before ordering.
Can a face shield lens replace a welding helmet lens?
No, not as a rule. The Feekoon lens here is a tinted visor made for the Hobart 770580 face shield, at 15.5 by 8 inches and 0.04 inch thick. A welding helmet needs a lens made for its own window opening, so buy the part made for the hood or shield in hand.
Related: best lens for welding helmet, flip up vs fixed lens welding helmet, and welding helmet types.




