Parts Washer with Filter: Features and Buying Tips
A parts washer with filter keeps the cleaning fluid cleaner for longer, and the right filter type depends on what you wash and how fine the grit runs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VEVOR 15L Ultrasonic Cleaner9.6/10View on Amazon - 2
VEVOR 6L Ultrasonic Cleaner9.6/10View on Amazon - 3
CREWORKS 30L Digital Ultrasonic Cleaning Machine with Heater9.5/10View on Amazon
A greasy gearbox cover comes off the bench and goes into the wash tank, and the solvent turns dark before the part comes clean. A parts washer with filter adds a filter to that tank, so grit and sludge stay in the media instead of floating back onto the next part. This guide explains the filter types on the listings, what each type catches, and how to match a filter to the washer already in the shop.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
What a parts washer with filter does
A parts washer holds solvent or water based cleaner in a tank, and a pump moves the fluid over the part while a brush or nozzle does the scrubbing. The filter sits in that loop and catches the grit the fluid picks up. Without a filter, the same grit keeps circulating and settles back on clean metal. With a filter in place, the fluid stays cleaner for longer and the pump sees less grit.
Filter bags
A filter bag traps grit as solvent passes through its media. The Zep Dyna-Trap filter bag (on Amazon) lists a pack of 2, and the maker states it pulls 1/2 to 1-1/2 quarts motor oil from dirty solvent, with limited amounts of grease and oil removed as fluid moves through the media. The same listing gives a weight of 24.7 pounds and dimensions of 14.5 inches x 7.5 inches x 21.7 inches, so check shelf space before ordering.
Mesh screens and inline filters
Mesh screens catch grit by size, and a higher mesh number means a finer screen. The screens on the listings here are water-line filters, not solvent-tank filters: the Sooprinse garden hose inlet filter lists a 40 mesh screen, with 2 extra 100 mesh screens in the kit, plus 3 O-rings and 4 filter hose washers, and 3/4 inch male and female ends. The FA20 brass sediment filter lists a 40 micron filter with a 40 mesh 304 stainless steel screen, an inline length of 3.15 inches, 4.85 inches for washer machines, and a total height of 3.65 inches. The listing gives a 40 micron figure and a 40 mesh screen, and those two figures do not line up, since mesh and microns are different measures. The maker states a top pressure of 0.6 MPa and states a pressure reducing valve is needed above that figure. The FA20 listing calls its filter reusable, and the Sooprinse kit ships with 2 extra 100 mesh screens for swaps.
Filter mats
A filter mat lays flat in the washer and traps grit as fluid drains through it. The CRC OzzyMat FL-4 (on Amazon) lists a pack of 1 and states it traps particulate down to 50 microns in size. The maker pairs it with the CRC SmartWasher bioremediating parts washing system, whose fluid eats grease, oil and other grime from dirty parts, leaving the cleaning fluid ready to use again. The listing gives dimensions of 30.0 inches x 8.0 inches x 6.0 inches, so measure the tank before ordering.
Side by side
| Filter bag | Inline mesh screen | Filter mat | |
|---|---|---|---|
| What it catches | Particulate matter in solvent | Sediment and debris | Particulate down to 50 microns |
| Listing example | Zep Dyna-Trap, pack of 2 | Sooprinse 40 mesh, with 100 mesh spares | CRC OzzyMat FL-4, pack of 1 |
| Also pulls out | 1/2 to 1-1/2 quarts motor oil | Not stated | Particulate only; grease is the system’s job |
| Pack size | 2 filter bags | 1 inline filter | 1 filter mat |
| Reuse | Replace when loaded | Swap in a spare screen | Not stated |
Use the table to match the filter to the job. A bag traps particulate in solvent and pulls a limited amount of oil, in an ongoing program rather than as a fix for a badly contaminated system. A screen suits water lines and washers where the filter must rinse clean. A mat suits a system built around it, like the SmartWasher the CRC listing names.
Do not buy a laundry filter by mistake
Search results for washer filter mix very different products. Several listings are laundry machine parts, not parts washer filters. The Luxzio lint filter (on Amazon) is a 6-pack for a GE washer dryer combo and ships with 2 dryer vent brushes and 1 crevice brush. The A.I.FORCE set is a 4-pack of washing machine inlet valve screens, with 2 hot and 2 cold screens. The LG AGM73269501 is a washing machine inlet valve filter screen. These fit laundry machines and do nothing for a solvent tank. The Sooprinse and FA20 screens covered above are water-line filters as well: they belong on a hose or a washer inlet, not in a solvent tank.
How to pick a parts washer with filter
Match the filter to the washer, the fluid and the grime, in that order.
- Match the size. Measure the tank or the line where the filter sits, then compare it with the dimensions the listing states. The Zep listing gives 14.5 inches x 7.5 inches x 21.7 inches, and the CRC mat measures 30.0 inches x 8.0 inches x 6.0 inches.
- Match the fineness. A 40 mesh screen and a 50 micron mat catch different grit, and mesh and microns are different measures, so a mesh figure and a micron figure do not compare directly. Finer media clogs sooner, so a shop that washes heavy grease may want a coarser screen or a bag in front of it.
- Check the fluid. Solvent eats some plastics and rubbers, so check the listing states the media suits solvent before ordering for a solvent tank. For solvent choice, see brake cleaner vs acetone for welding.
- Check the pack. A pack of 2 bags or a 20-pack of inlet screens changes how often you reorder. The Opzour set lists a 20-pack of washing machine inlet valve screens at 0.79 x 0.39 inches, which is 20 x 10 mm, and the maker lists a 1 year warranty.
- Check the brush. The DECOHS parts washer brush (on Amazon) lists a 31 inch hose and a 10.5 inch brush, and it suits flow through cleaning where solvent runs to the bristles.
Solvent safety stays simple: run the washer with ventilation, keep it away from open flame and sparks, and wear gloves and eye protection when handling dirty solvent. Check the solvent label and the washer manual for the fluid the tank is made for. For fume protection, see respirator cartridge vs filter.
FAQ for welders
What does the filter in a parts washer do?
The filter catches grit, sludge and metal fines that the fluid picks up from dirty parts, so the fluid stays cleaner and the pump sees less grit. Without it, the same grit keeps circulating and settles back on the next part.
How fine should a parts washer filter be?
The listings give two reference points: a 40 mesh screen and a mat that traps particulate down to 50 microns. Mesh and microns are different measures, so those two figures do not compare directly. Finer media catches smaller grit but clogs sooner, so match the fineness to the grit on the parts, not to the finest figure on the page.
Can I rinse and reuse a parts washer filter?
Mesh screens rinse clean and go back in, and the Sooprinse kit ships with 2 extra 100 mesh screens for swaps. Filter bags are consumable media: when a bag loads up, swap in a fresh one. The CRC listing does not state a reuse or replacement routine for the mat, so check the listing.
Will a washing machine filter fit a parts washer?
No. Laundry inlet screens like the LG AGM73269501 and the A.I.FORCE 4-pack fit washing machines, and the Luxzio 6-pack fits a GE washer dryer combo. None of these fit a solvent tank.
How often should I change the filter?
No listing states a change interval, so change the media when flow slows, when the fluid stays dark after a wash, or when the bag or mat looks loaded. The Zep listing states its bag is meant for a continuous waste minimizing program, not as a remedy for a badly contaminated system.
Related: metal fab tools, best air dryer filter for plasma cutter, best welding tip cleaner, and best sanding belt cleaner.




