Parts Washer Brush: Types, Hose Styles and Uses
A parts washer brush puts solvent and stiff bristles on the grime a washer leaves behind, in flow-through hose and dip styles.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Lisle 14000 Parts Cleaning Brush9.5/10View on Amazon - 2
DECOHS 2 Pcs Parts Washer Brush with 31 Inch Hose9.5/10View on Amazon - 3
2 Pcs Parts Washer Brush with 31in Hose,Wear9.5/10View on Amazon - 4
Wesquer Parts Cleaning Brush Home and Auto Use9.4/10View on Amazon
A greasy bracket comes out of the washer still filmed with grime, and the corners hold grit the pump stream never reaches. A parts washer brush puts stiff bristles and solvent right on that grime, so the part comes out ready for the next step at the bench. This guide covers flow-through hose brushes and dip brushes.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Lisle 14000 Parts Cleaning Brush
A dip brush with polypropylene bristles that hold up in cleaning solvents, for motors, machinery and metal parts, with the only stated lifetime warranty here.
Pros
- Polypropylene bristles hold up under repeated use in cleaning solvents
- 14.5 inch length reaches into motors and machinery
- Limited lifetime warranty, the only lifetime term stated here
- Light at 0.2 lb
Cons
- No hose, so solvent must be dipped or poured on
- Single brush in the box, no spare
- One size only, no shorter or longer option
- 1.0 inch width suits small areas, not broad panels

DECOHS 2 Pcs Parts Washer Brush with 31 Inch Hose
A pair of flow-through brushes with a 31 inch hose that delivers solvent straight to the bristles, made for deep crevices and on-engine cleaning.
Pros
- 31 inch rubber hose delivers solvent directly to the bristles
- Two brushes in the pack, so a spare is ready
- Threaded ergonomic handle gives a firm grip
- Hose resists corrosion, oil and abrasion
Cons
- No warranty term is stated
- 10.5 inch brush is shorter than the Lisle dip brush
- Suits most parts washers, so check the fit with yours
- Hose adds bulk compared with a plain dip brush

2 Pcs Parts Washer Brush with 31in Hose,Wear
A pair of flow-through brushes with a 31 inch hose and a 10.5 inch brush, made for parts washing, on-engine cleaning and fluid evacuation.
Pros
- 31 inch rubber hose delivers solvent directly to the bristles
- Two brushes in the pack, so a spare is ready
- Threaded ergonomic handle gives a firm grip
- Hose resists corrosion, oil and abrasion
Cons
- 10.5 inch brush is shorter than the Lisle dip brush
- Suits most parts washers, so check the fit with yours
- Hose adds bulk compared with a plain dip brush
- Soft bristles suit crevices more than broad flat panels

Wesquer Parts Cleaning Brush Home and Auto Use
A pair of dip brushes with stiff polypropylene bristles, a PVC handle and a stainless steel ferrule, made for engine parts and tight spaces.
Pros
- Stiff polypropylene bristles for heavy-duty scrubbing
- Stainless steel ferrule and PVC handle for a firm grip
- Two brushes in the pack
- Shaped for tight spaces on engines and small motors
Cons
- No hose, so solvent must be dipped or poured
- No warranty term is stated
- 11.8 inch length is shorter than the Lisle brush
- 2 brushes of the same size, no size choice
Parts Washer Brush Types
The brushes here come in 2 styles. A flow-through brush feeds solvent through a hose straight to the bristles, so they stay wet while you scrub a crevice or an engine part. A dip brush has no hose: you dip it in the tank, then scrub by hand. The flow-through brushes here are listed for parts washing, on-engine cleaning and fluid evacuation. The Lisle dip brush is listed for motors, machinery and metal parts.
- Flow-through hose brush. A rubber hose carries solvent to the bristles. The brushes here list a 31 inch hose that resists corrosion, oil and abrasion, with a threaded ergonomic handle for grip.
- Dip brush. No hose to manage. The Lisle dip brush lists polypropylene bristles that hold up under repeated use in cleaning solvents, and the brush works straight from the tank.
What to Look For in a Parts Washer Brush
Bristle claims differ by maker: Lisle lists polypropylene bristles that hold up under repeated use in cleaning solvents, Wesquer lists stiff polypropylene bristles for heavy-duty scrubbing, and the hose brushes list soft PP bristles made to clean deep crevices. The hose brushes list a threaded ergonomic handle for a firm grip that prevents slip-off in use. The hoses here are listed as resisting corrosion, oil and abrasion, at a stated length of 31 inches. A 2 brush pack keeps a spare at the bench.
Fit matters too: the hose brushes here suit most parts washers, so check the hose end against your washer before ordering, and wear chemical-resistant gloves with the solvent you use; see our parts washer gloves guide.
Parts Washer Brushes for the Shop
Each brush below puts solvent and bristles on the grime a washer leaves behind, whether the solvent arrives through a hose or straight from the tank.
Side by Side
| Hose | Brush length | Pack | Bristles | Handle | Gear Score | |
|---|---|---|---|---|---|---|
| Lisle 14000 Parts Cleaning Brush | None, dip brush | 14.5 in | 1 | Polypropylene | Not stated | 9.5/10 |
| DECOHS Parts Washer Brush 2 Pcs | 31 in rubber hose | 10.5 in | 2 | PP | Plastic, threaded grip | 9.5/10 |
| moonoom Parts Washer Brush 2 Pcs | 31 in rubber hose | 10.5 in | 2 | PP | Plastic, threaded grip | 9.5/10 |
| Wesquer Parts Cleaning Brush 2 Pcs | None, dip brush | 11.8 in | 2 | Stiff polypropylene | PVC | 9.4/10 |
The Lisle brush carries a limited lifetime warranty term. The 2 hose brushes both list a 31 inch hose and a 10.5 inch brush.
FAQ for welders
What is a parts washer brush?
A parts washer brush is a stiff-bristled brush made for scrubbing grease and dirt off metal parts in solvent. Polypropylene bristles hold up under repeated use in cleaning solvents.
Do I need a flow-through brush or a dip brush?
Pick a flow-through brush when your washer has a hose hookup and you want solvent fed straight to the bristles while you scrub crevices and engine parts. Pick a dip brush when you clean by hand at the tank and want nothing extra to manage.
Can a parts washer brush be used with solvent?
The brushes here are made for solvent use. They use polypropylene or PP bristles, and the maker of the Lisle brush states the bristles hold up under repeated use in cleaning solvents. The rubber hoses on the flow-through brushes resist corrosion, oil and abrasion.
How do you clean a parts washer brush after use?
Wash it with water directly, as the maker directs for the hose brushes here. Shake out the water and let the bristles dry before the brush goes back on the bench.
Will a flow-through brush fit my parts washer?
The maker of the hose brushes here states they suit most parts washers. Check the hose end and brush size against your washer before ordering: the hose brushes here list a 31 inch hose and a 10.5 inch brush.
Related: parts washer brush and hose, how to use a parts washer, parts washer fluid, and the metal fab tools hub.




