Parts Washer Gloves: Chemical-Resistant Options
Parts washer gloves keep solvent and oil off your hands while you clean parts, and the choice comes down to thickness, grip and whether the glove is disposable or reusable.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ThxToms Chemical Resistant Nitrile Gloves9.6/10View on Amazon - 2
ForPro Disposable Nitrile Gloves, 4 Mil9.6/10View on Amazon
A parts washer tank holds solvent and oil, and cleaning a greasy bracket means dipping hands into that fluid again and again. Bare hands come out coated, and a cloth glove soaks through fast. Parts washer gloves are the barrier between hands and the fluid in the tank, and the right glove is thick enough to hold up, grippy enough to hold a part, and sized to fit. This guide explains thickness, grip, cuff and fit, and shows nitrile gloves for parts washer work.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ThxToms Chemical Resistant Nitrile Gloves
A reusable 15 mil nitrile glove with a diamond-textured palm and a spray-flocked lining, sold as 1 pair in size Large.
Pros
- 15 mil thickness, the thickest glove here
- Diamond-textured palm for a secure grip
- Reusable, with a spray-flocked lining for easy on and off
- Resists household acid, alkali, solvent and oil, per the listing
Cons
- Only 1 pair per pack, so no spare pair in the box
- Size Large is the only size stated, so fit is fixed
- No warranty term is stated
- The 15 mil thickness suits heavy work more than fine work with small parts

ForPro Disposable Nitrile Gloves, 4 Mil
A disposable 4 mil black nitrile glove with a textured finish and a beaded cuff, in a box of 100 gloves in size Large.
Pros
- 4 mil thickness, the thinnest glove here
- Textured finish for slip resistance in wet or dry conditions
- Beaded cuff, and ambidextrous for either hand
- Comes in a dispenser box, with 100 gloves
Cons
- 4 mil is the thinnest glove here, so it offers less material between hand and solvent than the thicker gloves
- Disposable and for single use only
- Size Large is the only size stated, so fit is fixed
- Thin material suits short jobs; a long soak in solvent calls for a thicker glove
Parts washer gloves: what to look for
Parts washer gloves need to resist the fluid in the tank, grip a wet part, and stay on the hand while you scrub. Thickness decides how much material sits between hand and fluid. Grip decides whether a part slips. Cuff and fit decide whether fluid runs inside the glove. Match them to the fluid and the parts in the tank. The parts washer cleaner guide covers the fluid side of the job.
Thickness: 4 mil and 15 mil
Thickness is given in mil, and the gloves here run from 4 mil to 15 mil. The ForPro glove is 4 mil, and the ThxToms glove is 15 mil. A thicker glove puts more nitrile between hand and fluid, and a thinner glove gives more feel for small parts. The ThxToms glove is reusable at 15 mil, while the ForPro glove is disposable at 4 mil.
Grip, cuff and fit
Grip comes from texture on the glove surface. The ForPro glove has a textured finish for slip resistance in wet or dry conditions, and the ThxToms glove has a diamond-textured palm. The ForPro glove has a beaded cuff. Both gloves here are size Large, so check the size against the hand before ordering, and see the welding gloves size chart for fit. A loose glove can slip on a wet part, and a tight glove can tear at the cuff.
Disposable or reusable
Disposable gloves are used once and then thrown away, and reusable gloves are washed and used again. The ForPro glove is disposable, with 100 gloves in a dispenser box. The ThxToms glove is reusable, sold as 1 pair, with a spray-flocked lining that makes it easy to put on and take off. See the parts washer accessories guide for brushes and baskets that go with the gloves.
Side by side
| Glove | Thickness | Type | Grip | Count |
|---|---|---|---|---|
| ThxToms Chemical Resistant Nitrile Gloves | 15 mil | Reusable | Diamond-textured palm | 1 pair |
| ForPro Disposable Nitrile Gloves | 4 mil | Disposable | Textured finish | 100 gloves |
The table lines up thickness, type, grip and count. The thicker glove is the reusable ThxToms glove at 15 mil, and the thinner glove is the disposable ForPro glove at 4 mil.
Parts washer gloves for the shop
The gloves below handle the hands-in-the-tank part of parts washer work, from dipping a bracket in solvent to scrubbing oil off a part.
FAQ for welders
What thickness glove do I need for a parts washer?
Thickness is a trade between material and feel. The gloves here are 4 mil and 15 mil, with the ForPro glove at 4 mil and the ThxToms glove at 15 mil. A thicker glove puts more nitrile between hand and fluid, so pick 15 mil for heavy work.
Are nitrile gloves chemical resistant?
The gloves here are nitrile and stated as chemical resistant, but nitrile does not resist every chemical. The ForPro glove is stated as chemical and puncture resistant, and the ThxToms glove resists household acid, alkali, solvent and oil. Check the fluid against the resistance the maker states.
Can I reuse parts washer gloves?
It depends on the glove. The ThxToms glove is reusable and sold as 1 pair, with a spray-flocked lining. The ForPro glove is disposable and for single use only, with 100 gloves per box.
What size parts washer gloves should I buy?
Both gloves here are size Large. Measure the hand and check the size against the listing, and use the welding gloves size chart for fit. A glove that fits holds a wet part, while a loose glove can slip and a tight glove can tear.
Related: parts washer cleaner, parts washer accessories, best welding gloves for beginners, and the welding safety gear hub.




