Parts Washer Accessories Guide: Brushes, Baskets and Hookups
Parts washer accessories are the brushes, baskets and hoses that turn a bare parts washer into a working cleaning station for greasy shop parts.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Jack Boss 3.5 Gallon Capacity Portable Steel Cabinet Parts9.6/10View on Amazon - 2
Parts Washer [20-Gallon Tank]9.5/10View on Amazon - 3
VEVOR Parts Washer 5-Gallon9.5/10View on Amazon
A greasy bracket lands on the bench after a teardown, and the wash tank beside it is bare: no brush, no basket, nothing to hold the small bolts. Parts washer accessories are the brushes, baskets and hoses that turn that bare tank into a working cleaning station. The short answer: a flow-through brush that feeds solvent to the bristles, a mesh basket for small parts, and the hose that connects the brush to the washer. The rest of this guide walks through each piece, what it does, and what to check before buying.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Parts washer accessories: the short list
Most shop parts washers need a short list of add-ons before they earn their bench space. A flow-through brush does the scrubbing, a mesh basket holds the small parts, and a hose links the brush to the washer so solvent reaches the bristles. The table below lines up the main types, with the figures the makers state. If the washer itself is still undecided, the high pressure parts washer comparison lines up the picks.
Side by side
| Brush with 31-inch hose | Brush with 28-inch hose | Mesh basket with lid | |
|---|---|---|---|
| What it does | Feeds solvent to the bristles while you scrub | Feeds solvent to the bristles while you scrub | Holds small parts in the wash |
| Hose length | 31 inches | 28 inches | No hose |
| Working size | 10.5-inch brush | Not stated | 8.5 x 9 inch round basket |
| Pack count | 2 pieces | 1 piece | 1 piece |
| Fits | Most parts washers | Not stated | Not stated |
| Cleaning solution | Solvent fed to the bristles | Petroleum- or water-based solutions | Not stated |
Hose length decides how far the brush reaches across the tank. The basket has no hose at all: it sits in the wash and holds parts while the solvent does the work.
Flow-through brushes
A flow-through brush is the main tool in a parts washer. Solvent runs through the hose to the bristles, so the brush scrubs and flushes at the same time. The moonoom brush pairs a 31-inch rubber hose with a 10.5-inch brush, and it is sold as a single brush and as a 2-piece set. The Parts Brush Oriflo pairs a 28-inch hose with a bullet-shaped tip of stiff Trialoy polyester filament, and it is listed as good for petroleum- or water-based cleaning solutions. The moonoom brush is listed as suitable for most parts washers, and the Oriflo is listed as shipping as original equipment with most of the parts washers made in the world.
Pick the hose length by the reach the tank needs: a 31-inch hose reaches further across a wide tank than a 28-inch hose. Check the connection at the washer nozzle before ordering, since the Oriflo connects to the washer nozzle and the moonoom hose delivers solvent straight to the bristles. See the parts washer brush and hose guide for more on hose fit.
Baskets for small parts
Small parts sink, roll and vanish in a wash tank. A mesh basket with a lid holds them in one place while the solvent works, and the lid keeps them in the basket when it is lifted. The Tackle Factory basket (on Amazon) measures 8.5 x 9 inches, round, with a lid. Match the basket to the parts: bolts, fittings and small brackets ride in the basket, while larger parts stay in the main wash area.
Check the basket against the tank before buying: it has to sit in the wash without crowding the brush work. The parts washer tank guide covers tank sizes and layout.
Hoses and hookups
The hose is what makes a flow-through brush work: it carries solvent from the washer to the bristles. The two brush listings compared here state 31-inch and 28-inch hoses, so hose length is a reach choice, and the listings also differ in tip, filament and solution type. A longer hose reaches across a wider tank. Check that the hose end matches the washer nozzle, and check the brush handle grip: the moonoom handle has a threaded design for grip.
The parts washer cleaner guide covers what goes in the tank.
What to check before you buy
- Hose length. Measure the reach from the washer nozzle to the far side of the tank, then pick the 31-inch or 28-inch hose that covers it.
- Brush size. The moonoom brush is 10.5 inches and is listed for deep crevices and stubborn deposits, while the Oriflo has a bullet-shaped tip of stiff Trialoy polyester filament. Check the tip shape against the parts you clean.
- Basket size. An 8.5 x 9 inch basket holds small parts; check it against the tank opening before ordering.
- Solution type. The Oriflo brush is listed as good for petroleum- or water-based cleaning solutions; match the brush to the solution in the tank.
- Pack count. Brushes come as a single brush or a 2-piece set; a spare brush keeps the wash going while one is cleaned.
FAQ for welders
What is a flow-through parts washer brush?
A brush with a hose that feeds cleaning solution straight to the bristles, so it scrubs and flushes at the same time. The moonoom brush uses a 31-inch hose and a 10.5-inch brush, while the Oriflo uses a 28-inch hose. The moonoom brush is listed as suitable for most parts washers.
Do parts washer brushes fit every parts washer?
The moonoom listing says it is suitable for most parts washers, not every one. Check the hose connection against the washer nozzle before ordering, since the Oriflo connects to the washer nozzle.
Can a parts washer brush handle water-based solution?
The Oriflo brush is listed as good for both petroleum- or water-based cleaning solutions. Match the brush to the solution in the tank, and check the listing for the brush you buy.
What size basket fits a parts washer?
The basket compared here measures 8.5 x 9 inches, round, with a lid. Check the basket against the tank opening and the size of the parts, since a basket that crowds the tank leaves no room for the brush.
How many brushes come in a set?
The moonoom brush comes as a single brush or a 2-piece set, and the Oriflo comes as a single brush. A 2-piece set gives a spare while one brush is cleaned.
Related: parts washer tank options, parts washer cleaner, high pressure parts washer, and the metal fab tools hub.




