Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

High Pressure Parts Washer: 4 Picks Compared

A high pressure parts washer setup pairs a compact electric washer with a long hose and a short gun to strip grease from shop parts, covering pressure, reach and fit.

High Pressure Parts Washer: 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Westinghouse ePX3100s Electric Pressure WasherWestinghouse ePX3100s Electric Pressure Washer9.7/10View on Amazon
  2. 2Westinghouse 50 ft PVC Pressure Washer HoseWestinghouse 50 ft PVC Pressure Washer Hose9.5/10View on Amazon
  3. 3Short Pressure Washer Gun with 1/4" QC,with 5Short Pressure Washer Gun with 1/4" QC,with 59.5/10View on Amazon
  4. 4Pressure Washer Hose for Ryobi Power Washer HosePressure Washer Hose for Ryobi Power Washer Hose9.4/10View on Amazon

Grease, grit and old oil coat every part that comes off an engine or a gearbox, and a plain rinse leaves the film behind. A high pressure parts washer answers that job with a focused jet that lifts grease from metal so the part can be inspected, coated with high temp spray paint for metal or put back into service. This guide explains what the setup needs and compares the washer, hose and gun that make it work.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Westinghouse ePX3100s Electric Pressure Washer

Westinghouse ePX3100s Electric Pressure Washer

Westinghouse9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact electric washer rated at 2100 max PSI and 1.76 max GPM, with a foam cannon, a turbo nozzle, a 35 foot cord and a 20 foot hose.

Pros

  • 2100 max PSI and 1.76 max GPM for tough jobs
  • Adjustable foam cannon lays thick, clinging foam on grease
  • Turbo nozzle adds a spinning jet for stuck grime
  • 35 foot GFCI cord and 20 foot hose give long reach

Cons

  • Electric power only, so it needs an outlet within reach of the 35 foot cord
  • The 20 foot hose is shorter than the 50 foot hose in this guide
  • Needs power and water hookups at the same spot
  • Working pressure is 1800 rated PSI, below the 2100 max PSI headline
Westinghouse 50 ft PVC Pressure Washer Hose

Westinghouse 50 ft PVC Pressure Washer Hose

Westinghouse9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50 ft pressure washer hose rated to 3400 PSI, with an M22 connector for gas and electric washers.

Pros

  • 50 ft length reaches higher floors and roofs while the washer stays put
  • Rated to 3400 PSI for gas and electric washers
  • M22 connector swaps onto nearly all gas powered washers
  • Kink-free design with sturdy materials for easier handling

Cons

  • Adds 3.75 pounds of hose to carry and coil
  • The 50 ft length needs coiling and storage after each job
  • No gun or nozzle comes with the hose, so it adds reach only
  • The 180-day warranty is shorter than the 2 year warranty on the washer here
Short Pressure Washer Gun with 1/4" QC,with 5

Short Pressure Washer Gun with 1/4" QC,with 5

GALELEOPARD9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A short pressure washer gun rated to 4350 PSI, with 5 nozzle tips and M22-14 mm, M22-15 mm and 3/8 inch fittings.

Pros

  • Rated to 4350 PSI, the highest pressure rating here
  • 5 nozzle tips in 0, 15, 25, 40 and 65 degree patterns
  • Solid brass trigger with a metal connector and spool
  • M22-14 mm, M22-15 mm and 3/8 inch fittings cover many hoses

Cons

  • Fits electric pressure washers only, not gas washers
  • Water must stay at or below 140 degrees Fahrenheit
  • No hose is included, so it needs a hose with matching fittings
  • The 1/4 inch socket fits 1/4 inch tips and fittings only
Pressure Washer Hose for Ryobi Power Washer Hose

Pressure Washer Hose for Ryobi Power Washer Hose

Ahuliao9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 ft replacement hose for Ryobi electric washers, part number 308835074, with a leak-proof design.

Pros

  • Fits Ryobi models RY141600, RY141612, RY141812G, RY14122 and RY141900
  • Leak-proof design at the interface for steady pressure
  • Built for hot and cold water washers
  • Light at 1.1 pounds, so it adds little weight to the setup

Cons

  • Fits Ryobi washers only, so check the model number first
  • The 20 ft length matches the washer hose, not the 50 ft hose here
  • No warranty term is stated
  • A replacement hose only, with no washer or gun in the box

What a high pressure parts washer does

A high pressure parts washer is a compact electric washer with a gun and hose that sprays water hard enough to strip grease, grime and stains from metal parts, cars, fences, driveways and patios. The washer here is the Westinghouse ePX3100s (on Amazon), rated at 2100 max PSI and 1.76 max GPM, with 1800 rated PSI and 1.2 rated GPM, so it covers light rinsing and tougher cleaning with the same machine. An adjustable foam cannon lays thick foam on grease to loosen it, and a turbo nozzle adds a spinning jet for stuck grime. The setup needs a hose that reaches the work and a gun that aims the jet, and the picks below cover each part.

Side by side

Pick Max PSI Max GPM Reach Weight
Westinghouse ePX3100s 2100 1.76 35 ft cord, 20 ft hose 10 lb
Westinghouse 50 ft Hose 3400 Not stated 50 ft 3.75 lb
GALELEOPARD Short Gun 4350 Not stated Not stated Not stated
Ahuliao Ryobi Hose Not stated Not stated 20 ft 1.1 lb

Pressure ratings differ across the setup: the gun handles up to 4350 PSI, the long hose is rated to 3400 PSI, and the washer tops out at 2100 max PSI, so the washer sets the limit for the whole setup. Hose length decides how far the work can sit from the washer: the long hose reaches 50 ft, the washer hose reaches 20 ft, and the cord reaches 35 ft. Match the hose to the washer it replaces, since the Ryobi hose fits Ryobi models RY141600, RY141612, RY141812G, RY14122 and RY141900.

The gear for a high pressure parts washer

The washer does the spraying, the hoses carry the water to the work, and the gun aims the jet, so each pick below handles one part of the cleaning job.

How to match the hose and gun to the washer

Start with the fittings: the short gun ships with a 3/8 inch quick connector and M22-14 mm and M22-15 mm fittings, plus a 3/8 inch NPT adapter, so it fits hoses with those ends. The long hose uses an M22 connector and fits gas and electric washers, while the Ryobi hose is a replacement part, number 308835074, for the Ryobi models listed above. The gun fits electric pressure washers only, not garden hoses, water hoses or faucets, so check the washer type before ordering. Water through the gun must stay at or below 140 degrees Fahrenheit, the rating the maker states, and the gun ships with 5 nozzle tips in 0, 15, 25, 40 and 65 degree patterns for different cleaning jobs. After the wash, rusty parts can move on to a rust converter for auto body treatment.

Working safely with pressure

High pressure water cuts skin and strips paint, so keep the jet away from people and pets and wear eye protection when spraying. The washer ships with a 35 foot GFCI power cord, so the cord itself carries the ground fault protection; keep connections dry and release pressure before changing a nozzle or hose. For parts that fit on a bench, the table top parts washer guide covers a bench setup instead of a spray gun.

For more options, see our metal fab tools guides.

FAQ for welders

What pressure does a high pressure parts washer need?

The washer here is rated at 2100 max PSI and 1.76 max GPM, with 1800 rated PSI and 1.2 rated GPM, and the gun handles up to 4350 PSI while the long hose is rated to 3400 PSI. Match the gun and hose to the washer rating, since the washer sets the limit for the setup.

How far can a high pressure parts washer reach?

The washer ships with a 35 foot cord and a 20 foot hose, and the long hose reaches 50 ft with an M22 connector. The extra hose lets the washer stay put while the gun reaches around cars, fences and patios.

Can a high pressure parts washer clean greasy engine parts?

The foam cannon lays thick, clinging foam to loosen grease, grime and stains from cars, windows, decks and more, and the turbo nozzle adds a spinning jet for stuck grime. The foam and the jet work on the grease that coats engine parts, and the washer handles cars, fences, driveways and patios.

Will a replacement hose fit a Ryobi washer?

The Ahuliao hose (on Amazon) is a replacement for Ryobi part number 308835074 and fits Ryobi models RY141600, RY141612, RY141812G, RY14122 and RY141900. Check the model number on the washer before ordering.

What nozzle tips come with a pressure washer gun?

The short gun ships with 5 nozzle tips in 0, 15, 25, 40 and 65 degree patterns, plus a 3/8 inch quick connector and M22-14 mm and M22-15 mm fittings. The tips suit car washing, ground gutters, windows, roofs, gutters and floors.

Related: table top parts washer, respirator for grinding metal, and fire extinguisher for farm shop.

More buying guides