Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best High Temp Spray Paint for Metal (2026): 5 Picks for Grills, Stoves and Engine Parts

Five high temp spray paints for metal, compared on heat rating, coverage, dry time, finish and the warranty each listing states.

Best High Temp Spray Paint for Metal (2026): 5 Picks for Grills, Stoves and Engine Parts
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1NADAMOO 2000°FBest OverallNADAMOO 2000°F9.7/10View on Amazon
  2. 2Rust-Oleum High Heat FlatQuickest Dry Time StatedRust-Oleum High Heat Flat9.6/10View on Amazon
  3. 3Rust-Oleum High Heat Semi-GlossBest Semi-Gloss FinishRust-Oleum High Heat Semi-Gloss9.6/10View on Amazon
  4. 4Rutland 80Best No PrimerRutland 809.5/10View on Amazon

When a grill, stove or exhaust part comes off the bench with bare metal showing, paint is the last step before the part goes back into service. A coat that cannot take heat blisters and peels, and the rust comes back. The best high temp spray paint for metal keeps its color and finish on metal that sees intermittent heat, and this guide compares the cans on what each listing states: heat rating, coverage, dry time, finish and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall NADAMOO 2000°F: The only can here rated to 2000°F, with 10 to 12 square feet of coverage per can and a matte black finish. Check price on Amazon
  • Quickest Dry Time Stated Rust-Oleum High Heat Flat: Dries to the touch in about 30 minutes, covers 7 to 8 square feet per can, and states rust and corrosion protection. Check price on Amazon
  • Best Semi-Gloss Finish Rust-Oleum High Heat Semi-Gloss: The only semi-gloss black here, rated to 1200°F with the same dry time and coverage as the flat can. Check price on Amazon
  • Best No Primer Rutland 80: No primer needed, per the listing, with a flat black finish for stoves, grills and smokers. Check price on Amazon

The machines

NADAMOO High Heat Spray Paint for Metal

NADAMOO High Heat Spray Paint for Metal

NADAMOO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The only can here rated to 2000°F, with 10 to 12 square feet of coverage per can, a matte black finish and stated rust protection for fireplaces, grills, stoves and engine parts.

Pros

  • Rated to 2000°F, the highest heat rating here
  • Covers 10 to 12 square feet per can
  • Stated for steel, cast iron, aluminum and brick
  • Aerosol spray, no brushes or rollers needed

Cons

  • No dry time stated in the listing
  • No warranty term stated
  • Not for areas directly exposed to flame
  • No can weight stated in the listing
NADAMOO High Heat Spray Paint for Metal

NADAMOO High Heat Spray Paint for Metal

NADAMOO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The same NADAMOO can in a 1200°F rating, with the same 10 to 12 square feet of coverage per can, matte black finish and stated uses.

Pros

  • Rated to 1200°F for intermittent heat
  • Covers 10 to 12 square feet per can
  • Stated for steel, cast iron, aluminum and brick
  • Aerosol spray, no brushes or rollers needed

Cons

  • Lower heat rating than its 2000°F sibling
  • No dry time stated in the listing
  • No warranty term stated
  • Not for areas directly exposed to flame
Rust-Oleum High Heat Flat Bar-B-Que Black Enamel

Rust-Oleum High Heat Flat Bar-B-Que Black Enamel

Rust-Oleum9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A flat Bar-B-Que Black enamel rated to 1200°F that dries to the touch in about 30 minutes and covers 7 to 8 square feet per can.

Pros

  • Dries to the touch in about 30 minutes
  • Covers 7 to 8 square feet per can
  • Rated to 1200°F intermittent heat
  • Rust and corrosion protection stated

Cons

  • Covers 7 to 8 square feet per can, less than the NADAMOO cans
  • No warranty term stated
  • Primer use is not stated in the listing
  • Flat Bar-B-Que Black is the only color stated
Rust-Oleum High Heat Ultra Semi-Gloss Black Spray

Rust-Oleum High Heat Ultra Semi-Gloss Black Spray

Rust-Oleum9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The same Rust-Oleum high heat enamel in a semi-gloss black, rated to 1200°F, drying to the touch in about 30 minutes and covering 7 to 8 square feet per can.

Pros

  • Semi-gloss black finish, the only sheen of its kind here
  • Dries to the touch in about 30 minutes
  • Covers 7 to 8 square feet per can
  • Rust and corrosion protection stated

Cons

  • No can weight stated in the listing
  • No warranty term stated
  • Same heat rating and coverage as the flat can
  • Primer use is not stated in the listing
Rutland Products 80 Hi-Temp Spray Paint

Rutland Products 80 Hi-Temp Spray Paint

RUTLAND PRODUCTS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1200°F flat black spray paint that needs no primer and adheres to steel, cast iron, aluminum and brick.

Pros

  • No primer needed, per the listing
  • Restores an old stove or grill, per the listing
  • Adheres to steel, cast iron, aluminum and brick
  • Flat black finish for stoves, grills, smokers and stove pipes

Cons

  • No coverage per can stated
  • No dry time stated
  • No engine or exhaust use stated
  • Flat black is the only finish stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Heat rating Coverage per can Dry time Finish Size Warranty
NADAMOO 2000°F 9.7/10 2000°F 10-12 sq ft Not stated Matte black 12.5 oz None stated
NADAMOO 1200°F 9.6/10 1200°F 10-12 sq ft Not stated Matte black 12.5 oz None stated
Rust-Oleum High Heat Flat 9.6/10 1200°F 7-8 sq ft About 30 min Flat Bar-B-Que Black 12 oz None stated
Rust-Oleum High Heat Semi-Gloss 9.6/10 1200°F 7-8 sq ft About 30 min Semi-gloss black 12 oz None stated
Rutland 80 9.5/10 1200°F Not stated Not stated Flat black 12 fl oz None stated

All specs here repeat what the maker rates and the listing prints, copied down 10 November 2026.

Buying guide: best high temp spray paint for metal

Heat rating

Four cans here are rated to 1200°F, and one can, the NADAMOO 2000°F, is rated to 2000°F. The rating covers intermittent heat, which is the wording the Rust-Oleum listings use, and the NADAMOO listings state working temperatures up to the stated rating. Match the rating to the part: grills, stoves and radiators sit at the 1200°F end, while exhaust systems and engine manifolds are the stated uses for the hotter can.

Coverage per can

Coverage per can is stated for every can here except the Rutland. The Rust-Oleum cans cover 7 to 8 square feet per can, and the NADAMOO cans cover 10 to 12 square feet per can. The Rutland listing states no coverage, so its can size of 12 fl oz is the only size fact to plan from. A bigger stated coverage means fewer cans for a large part, but the rating and the finish still decide the pick.

Dry time and finish

Only the Rust-Oleum listings state a dry time: about 30 minutes to the touch. The finishes split three ways: flat black on the Rutland and the NADAMOO cans, flat Bar-B-Que Black on the Rust-Oleum flat can, and semi-gloss black on the Rust-Oleum Ultra can. No listing states how long the coating needs before the part sees heat, so the dry time is the only timing fact here.

Where not to use it

The NADAMOO listings carry a caution: the paint is not for areas directly exposed to flame, where temperatures can reach 3000°F, such as grill grates, the inside of BBQs or fireplaces. The Rust-Oleum and Rutland listings name the surfaces they cover: grills, stoves, radiators, engines, fire pits, fireplace screens, smokers, stove pipes and chimney caps. Stay inside those stated uses, and keep the paint off any surface that sees direct flame.

Use as directed. Spray away from open flame and hot surfaces, and respect the direct-flame caution the NADAMOO listings state. Let the coating dry to the touch as the Rust-Oleum listings state before the part goes back into service.

Before You Strike an Arc

  • Check the heat rating on the can against the part: 1200°F covers grills, stoves and radiators, while the NADAMOO 2000°F can is the pick for hotter parts.
  • Match the finish to the job: flat black for stoves and grills, semi-gloss black where the listing states it.
  • Check the can size and coverage before you start: Rust-Oleum cans cover 7 to 8 square feet, NADAMOO cans 10 to 12 square feet per can.
  • The Rutland can needs no primer, per its listing; the other listings do not state primer use, so read the can before you spray.
  • Keep the part out of direct flame: the NADAMOO listings warn against areas directly exposed to flame.

FAQ for welders

What is high temp spray paint?

High temp spray paint is an enamel or resin coating made to keep its color and finish on metal that sees intermittent heat. The cans here are rated to 1200°F, except for one NADAMOO can rated to 2000°F. The listings name grills, stoves, radiators, engines, fire pits and fireplace screens as uses.

Does high heat spray paint work?

Within its stated rating, yes: the listings state that the coating retains its color and finish after repeated heating and protects against rust and corrosion. The rating is the limit, so a part that runs hotter than the stated rating needs a hotter can. Direct flame is outside every rating here, and the NADAMOO listings say so in plain words.

How much is high heat spray paint?

The listings here state no price, so the honest answer is to check the listing for the can you want. What the listings do state is coverage: Rust-Oleum cans cover 7 to 8 square feet per can, and NADAMOO cans cover 10 to 12 square feet per can. Can sizes are 12 oz, 12 fl oz and 12.5 oz.

How to use high heat spray paint?

The NADAMOO listings state an aerosol spray that needs no brushes or rollers, and proper preparation before spraying. The Rutland listing states no primer is needed, while the other listings do not state primer use. Rust-Oleum states the paint dries to the touch in about 30 minutes. Keep the paint off areas directly exposed to flame, as the NADAMOO listings warn.

How to remove high heat spray paint?

None of the five listings here states a removal method. The cans are sold as a durable finish that resists rust, corrosion and weathering, so removal is not part of what the makers describe. If a coating must come off, check the listing for the can you own, since no method is stated here.

Related: best weld through primer, best rust converter that can be painted over, best paint markers for metal, and the welding consumables hub. Also see our best high temp infrared thermometer. Also see our best brass wire brush. Also see our best MIG wire for exhaust.

Scoring, line by line

Each paint is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Spray paint has no electrical safety listing to state, so every can here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
NADAMOO 2000°F 9.7 32 21 21 n/a 0
NADAMOO 1200°F 9.6 29 21 21 n/a 0
Rust-Oleum High Heat Flat 9.6 28 21 20 n/a 0
Rust-Oleum High Heat Semi-Gloss 9.6 28 20 20 n/a 0
Rutland 80 9.5 26 19 19 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Welding Consumables ·

Best Rust Remover for Chrome (2026)

5 rust removers for chrome compared on stated size, form, chrome use and warranty, from sprays and liquid polish to a gallon iron remover.