Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Gloves Size Chart: Finding the Right Fit

A welding gloves size chart turns hand length and palm width into a glove size, so the cuff covers the wrist and the fingers keep a steady grip on the stinger.

Welding Gloves Size Chart: Finding the Right Fit
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ATLAS WELDER 16-Inch Leather Grill & FireplaceATLAS WELDER 16-Inch Leather Grill & Fireplace9.5/10View on Amazon
  2. 2Tillman 1414 Unlined Drivers X-Large GlovesTillman 1414 Unlined Drivers X-Large Gloves9.4/10View on Amazon

A bead runs long on a gate frame, sparks drop, and the cuff of a loose glove catches on the edge of the bench. A glove that fits keeps the hand steady on the stinger and keeps hot metal off the wrist while the weld cools. A welding gloves size chart turns a hand measurement into a glove size, so the glove stays snug at the fingers and loose enough to pull off fast.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ATLAS WELDER 16-Inch Leather Grill & Fireplace

ATLAS WELDER 16-Inch Leather Grill & Fireplace

ATLAS WELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16 inch gauntlet glove in 1.2 mm split cowhide leather with an insulated cotton liner, rated at 932°F, in size Large for MIG, TIG, Stick and Flux-Core work.

Pros

  • 16 inch gauntlet glove covers hands, wrists and forearms
  • 1.2 mm split cowhide leather with double-layer reinforcement at high-wear areas
  • Insulated cotton liner and Kevlar stitching for heat and abrasion resistance
  • Listed for MIG, TIG, Stick and Flux-Core welding, plus grinding and forge work

Cons

  • Only size Large is stated, so the fit range is narrow
  • Thick leather and a cotton liner give less finger feel for fine TIG work
  • Long gauntlet cuff can snag in tight spaces around the bench
  • No stated safety certification, so the heat rating stands on the maker claim alone
Tillman 1414 Unlined Drivers X-Large Gloves

Tillman 1414 Unlined Drivers X-Large Gloves

Tillman9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An unlined drivers glove in size X-Large, sold as a pack of 12 pairs, with a stated item weight of 0.401 pounds.

Pros

  • X-Large size suits larger hands that need a drivers fit
  • Unlined construction keeps the glove thin for a closer fit
  • Pack of 12 pairs covers spares for a long run of glove changes
  • Light stated item weight of 0.401 pounds

Cons

  • No liner, so the glove gives less insulation against hot metal than a lined glove
  • No heat rating is stated, so heat limits are not given
  • No cuff length is stated, so forearm coverage is not given
  • No warranty term is stated

How to read a welding gloves size chart

Start with hand length, measured from the wrist crease to the tip of the middle finger, and palm width, measured across the knuckles with the hand flat and the fingers together. Compare both measurements with the size label on the glove, and let the larger measurement decide the size when the hand falls between labels. Size labels run from small hands to large hands, and the labels in this guide are Large and X-Large. When the palm fits but the fingers run long, check the cuff as well, since a short cuff leaves the wrist open to sparks. The welding safety gear hub covers the rest of the kit that goes with the gloves.

What the size label tells you

The size label tells the hand size, and the glove style tells the coverage. A gauntlet cuff runs past the wrist and shields the forearm, while a drivers glove ends near the wrist and keeps the hand freer to move. A lined glove adds insulation between the leather and the hand, while an unlined glove keeps a closer feel for the stinger. Read the lined vs unlined welding gloves comparison and the gauntlet vs short welding gloves comparison before choosing between the styles in this guide.

Side by side

Glove Size listed Cuff and length Liner Welding processes Gear Score
ATLAS WELDER 16-Inch Leather Gloves Large 16 inch gauntlet Insulated cotton liner MIG, TIG, Stick, Flux-Core 9.5/10
Tillman 1414 Unlined Drivers Gloves X-Large (Pack of 12) Not stated Unlined Not stated 9.4/10

The ATLAS glove brings a lined gauntlet cuff and a stated heat rating, while the Tillman glove brings an unlined drivers fit in a pack of 12 pairs.

Gloves that fit the measurements in this guide

Hand length and palm width decide the size, and the gloves below cover the Large and X-Large sizes in this chart, with a lined gauntlet glove for long coverage and an unlined drivers glove for a closer fit.

FAQ for welders

How do I measure a hand for welding gloves?

Measure hand length from the wrist crease to the tip of the middle finger, then measure palm width across the knuckles with the hand flat and the fingers together. Compare both measurements with the size label on the glove, and pick the size that matches the larger measurement when the hand falls between sizes.

What if a hand falls between glove sizes?

Pick the larger size when the hand sits between labels, since a tight glove restricts the grip and a glove that is too loose slips on the stinger. Check the cuff length as well, since a gauntlet cuff covers the wrist even when the palm runs roomy.

What is the difference between a gauntlet cuff and a drivers glove?

A gauntlet cuff runs long past the wrist and covers the forearm, while a drivers glove ends near the wrist and leaves the hand freer to move. The ATLAS glove is a 16 inch gauntlet glove with an insulated cotton liner, and the Tillman glove is an unlined drivers glove in size X-Large.

Should welding gloves fit snug or loose?

A welding glove should fit snug at the fingers, with room to curl the hand around the stinger and pull the glove off fast. A glove that is too tight strains the seams and limits the grip, while a glove that is too loose catches on the bench and lets hot metal reach the wrist.

How do I know if a glove suits MIG, TIG, Stick or Flux-Core work?

Read the processes the maker names for the glove, and match the glove to the work on the bench. The ATLAS glove is listed for MIG, TIG, Stick and Flux-Core welding, plus grinding and forge work, while the Tillman listing names welding gloves in general with no processes stated.

Related: best welding gloves for a snug fit, lined vs unlined welding gloves, gauntlet vs short welding gloves, and the welding safety gear hub. Also see the welding safety gear checklist for beginners.

More buying guides

Welding Safety Gear ·

Cut Resistant Gloves Chart by Cut Level

A cut resistant gloves chart matches the cut level to the hazard: A7 for medium to heavy cut hazards and A1 for light work.

Welding Safety Gear ·

Ear Plugs Size Chart for Shop Noise

An ear plugs size chart that maps XS, S, M and L tips and foam plugs to shop noise, with the stated SNR figures…