Welding Cable Size Chart: Gauge and Diameter
Copper welding cables in 1/0, 2 and 4 AWG, compared on gauge, length, strand count and voltage, with a chart for matching cable size to the job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
iGreely 2 AWG Gauge Wire 10 Feet Black + 10 Feet9.6/10View on Amazon - 2
Shirbly 1/0 Gauge Battery Cable9.5/10View on Amazon - 3
Geosiry 1/0 Battery Cable9.4/10View on Amazon - 4
WotyWire 4 Gauge Wire Heavy Duty Battery Cable9.4/10View on Amazon
A welder looks for a new cable when the old lead is too short, too stiff, or too thin for the work on the bench. The welding cable size chart below sets out the gauges, lengths and strand counts the listings state, so you can match a cable to the job before you buy.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

iGreely 2 AWG Gauge Wire 10 Feet Black + 10 Feet
A 2 AWG kit with 10 ft of red and 10 ft of black cable, copper lugs and heat shrink in the box, and the only stated warranty here.
Pros
- Includes 5 copper lugs in 5/16 inch and 5 in 3/8 inch, plus heat shrink
- States a 13 mm outside diameter and 1070 strands of 0.2 mm wire
- 2 year warranty stated in the spec table
- Lists gauges from 1/0 to 8, so the same line covers other sizes
Cons
- Shorter leads than the 20 ft Shirbly pair, at 10 ft per color
- The listing points to a photo gallery for the full cable chart
- Lug sizes suit 5/16 inch and 3/8 inch studs only
- No voltage is stated for the cable itself, only for the heat shrink tubing

Shirbly 1/0 Gauge Battery Cable
A 1/0 AWG pair with 20 ft of red and 20 ft of black cable, 1703 strands of 0.2 mm wire, rated 600 volts.
Pros
- 20 ft per color, the longest leads in this guide
- 1703 strands of 0.2 mm copper wire
- Rated 600 volts, -58°F to +221°F
- EPDM jacket, solvent resistant, for outdoor and marine use
Cons
- No warranty term is stated
- Ships as cable only, with no lugs or heat shrink listed
- No outside diameter stated for the 1/0 cable
- 20 ft lengths take more room to coil and store than 10 ft leads

Geosiry 1/0 Battery Cable
A 1/0 AWG pair with 10 ft of red and 10 ft of black cable, the same 1703 strand count as the Shirbly, in shorter lengths.
Pros
- 1703 strands of 0.2 mm oxygen-free copper wire
- Rated 600 volts, -58°F to +221°F
- EPDM jacket rated for outdoor and marine use
- 10 ft per color is easy to coil and store
Cons
- No warranty term is stated
- No lugs or heat shrink listed in the box
- No outside diameter stated
- Same strand count and voltage as the Shirbly pair, so length is the main difference

WotyWire 4 Gauge Wire Heavy Duty Battery Cable
A 4 AWG pair with 10 ft of red and 10 ft of black cable, 673 strands, and a 2 mm EPDM jacket with a PET film layer.
Pros
- 673 strands of 0.2 mm oxygen-free annealed copper
- 2 mm EPDM insulation plus a PET film layer
- Rated 450/750V, -50°C to 105°C
- Lists welding, battery, inverter and solar use
Cons
- No warranty term is stated
- 4 AWG is the smallest gauge in this guide
- No lugs or heat shrink listed in the box
- The listing states the insulation thickness but no cable outside diameter
Welding cable size chart: the sizes in this guide
The chart below lists the gauge, length, strand count and voltage each listing states.
| Cable | Gauge | Length | Strands | Voltage |
|---|---|---|---|---|
| Shirbly 1/0 20 ft | 1/0 AWG | 20 ft red, 20 ft black | 1703 | 600 volts |
| Geosiry 1/0 10 ft | 1/0 AWG | 10 ft red, 10 ft black | 1703 | 600 volts |
| iGreely 2 AWG | 2 AWG | 10 ft red, 10 ft black | 1070 | 600 volts (heat shrink) |
| WotyWire 4 AWG | 4 AWG | 10 ft red, 10 ft black | 673 | 450/750V |
The strand counts track the gauge: the 1/0 cables list 1703 strands of 0.2 mm wire, the 2 AWG kit lists 1070 strands, and the 4 AWG pair lists 673 strands. Each cable uses 0.2 mm strands, so the strand count shows how much copper sits in the cable.
Voltage and temperature run close across the listings. The Shirbly and Geosiry pairs are rated 600 volts, the iGreely heat shrink tubing (on Amazon) is rated 600 volts, and the WotyWire pair is rated 450/750V. The Shirbly and Geosiry pairs state a temperature range of -58°F to +221°F, the iGreely heat shrink tubing states -50°C to +105°C, and the WotyWire pair states -50°C to 105°C.
| Gauge | Length | Strands | Voltage | |
|---|---|---|---|---|
| iGreely 2 AWG | 2 AWG | 10 ft red, 10 ft black | 1070 | 600 volts (heat shrink) |
| Shirbly 1/0 20 ft | 1/0 AWG | 20 ft red, 20 ft black | 1703 | 600 volts |
| Geosiry 1/0 10 ft | 1/0 AWG | 10 ft red, 10 ft black | 1703 | 600 volts |
| WotyWire 4 AWG | 4 AWG | 10 ft red, 10 ft black | 673 | 450/750V |
How to read the chart
Start with the gauge. The listings here state 1/0, 2 and 4 AWG, and the iGreely line also lists 1/0, 2, 4, 6 and 8 gauge.
Length comes next. The Shirbly pair gives 20 ft of red and 20 ft of black cable, and the other pairs give 10 ft of red and 10 ft of black cable.
Then look at the strands and the jacket. The listings state strand counts from 673 to 1703 strands of 0.2 mm wire, and EPDM jackets on each cable, with the WotyWire pair adding a PET film layer over the EPDM.
Check what comes in the box. The iGreely kit includes copper lugs and heat shrink tubing, and the other listings state cable only, with no lugs listed. The best welding cable roundup compares cables for the shop, and the best 2 AWG welding cable guide covers picks for leads and grounds.
Cable picks for the shop
Each cable below covers a part of the chart: the 1/0 pairs cover the heavy end, the 2 AWG kit covers the middle with lugs in the box, and the 4 AWG pair covers lighter runs.
FAQ for welders
What gauge welding cable do I need?
The listings here state 1/0, 2 and 4 AWG, with strand counts of 1703, 1070 and 673 strands of 0.2 mm wire. Match the gauge to the machine manual and the length of the run, and check the door chart or manual for the setting the job needs.
How long are the cables in this guide?
The Shirbly pair gives 20 ft of red and 20 ft of black cable. The Geosiry, iGreely and WotyWire pairs give 10 ft of red and 10 ft of black cable.
Do the cables come with lugs?
The iGreely kit includes 5 copper lugs in 5/16 inch and 5 in 3/8 inch, plus heat shrink tubing. The other listings state cable only, with no lugs listed.
What temperature range do the cables handle?
The Shirbly and Geosiry pairs state -58°F to +221°F, and the WotyWire pair states -50°C to 105°C. The iGreely heat shrink tubing states -50°C to +105°C.
What are the cables made of?
The listings state fully annealed pure copper or oxygen-free copper wire, with EPDM jackets. The WotyWire pair adds a PET film layer over the EPDM, and the iGreely lugs are pure copper with a tin coating.
Which cable has a warranty?
The iGreely kit states a 2 year warranty in the spec table. No warranty term is stated on the other listings in this guide.
Related: the best welding cable picks, the welding cable gauge comparison comparison, the copper vs aluminum welding cable comparison and the welding consumables hub.




