Cutting Torch Tips Sizes Charts: Oxy Fuel Cutting Guide
Cutting torch tip sizes charts match the tip number to the metal thickness it cuts, and this guide reads the chart, compares the 1-101 and 3-101 series, and ranks the tip sets from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1-101 Acetylene Cutting Torch Tips9.7/10View on Amazon - 2
2PK 1-3-101 Acetylene Cutting Torch Tips9.6/10View on Amazon - 3
JZWELD 0330-0006 2-1-101 Acetylene Cutting Tips9.5/10View on Amazon
A cutting torch only cuts clean when the tip matches the metal on the bench. Too small a tip and the cut drags, too large a tip and the kerf wanders and the edge comes out rough. Cutting torch tips sizes charts take that guesswork out of the job: match the tip number to the thickness of the plate, fit the series your torch takes, and the flame does the rest.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | 1-101 Acetylene Cutting Torch Tips | 9.7/10 | Buy on Amazon |
| 2 | 2PK 1-3-101 Acetylene Cutting Torch Tips | 9.6/10 | Buy on Amazon |
| 3 | JZWELD 0330-0006 2-1-101 Acetylene Cutting Tips | 9.5/10 | Buy on Amazon |

1-101 Acetylene Cutting Torch Tips
A 4-piece 1-101 set covering sizes 0 to 3 with a tip cleaner included, and the clearest cutting ranges in this guide.
Pros
- Sizes in one set: 0-1-101, 1-1-101, 2-1-101 and 3-1-101
- Cutting range stated for every size, from 3/8 to 1/2 in up to 2 to 2-1/2 in
- One tip cleaner included for routine maintenance
- Each tip comes in its own marked storage case
Cons
- Fits select Victor-style heavy-duty torches only, so check the series on your old tip
- Not for 3-101 tips or propane and natural-gas systems
- No warranty term is stated
- One-piece nozzle design with no stated orifice size beyond the series number

2PK 1-3-101 Acetylene Cutting Torch Tips
A 2-pack of 1-3-101 acetylene tips for Victor-style light and medium duty torches, with a tip cleaner in the box.
Pros
- 2-pack of 1-3-101 tips for light and medium duty torches
- Copper alloy with machined orifices for a steady flame, per the listing
- Tool-free fitting, per the listing
- Tip cleaner included
Cons
- No cutting thickness range stated for the 1-3-101 size
- Listing text mixes other 3-101 size labels into the bullets
- No warranty term is stated

JZWELD 0330-0006 2-1-101 Acetylene Cutting Tips
A 2-pack of 2-1-101 acetylene tips for Victor-type torches, with a stated cutting thickness of 1 to 1-1/2 in.
Pros
- Cutting thickness stated: 1 to 1-1/2 in (25.4 to 38.1 mm)
- 2-pack, so a spare tip is on hand
- Premium copper, per the listing
- Made for Victor-type cutting torches with no adapter stated
Cons
- Only the 2-1-101 size is stated, with no range for thinner or thicker metal
- No tip cleaner is stated as included
- No warranty term is stated
- Listing states little beyond size, fuel gas and thickness
How to read cutting torch tips sizes charts
Tip numbers read as size, series and fuel. In the 1-101 series, the leading figure is the size, and the sizes in this guide run from 0 to 3, with the cutting range rising as the size rises. The 3-101 series follows the same size steps for light and medium duty torches. Always check the series marked on the tip already on the torch, since a 1-101 tip and a 3-101 tip fit different torches even when the size figure matches.
The 1-101 size chart
The clearest chart in these listings comes from the ZANZANSUN 1-101 (on Amazon) set, which states a cutting range for each size. The JZWELD 2-1-101 (on Amazon) listing states the same range for that size, which lines up with the chart.
| Tip size | Cutting range |
|---|---|
| 0-1-101 | 3/8 to 1/2 in |
| 1-1-101 | 3/4 in |
| 2-1-101 | 1 to 1-1/2 in |
| 3-1-101 | 2 to 2-1/2 in |
No cutting range is stated for the 3-101 series in these listings. The Pidnsrozo listing names the 3-101 sizes from 0-3-101 to 3-3-101 without giving a thickness for any of them, so treat the chart above as a 1-101 chart only.
1-101 vs 3-101: which series fits your torch
The 1-101 series in this guide fits select Victor-style heavy-duty cutting torches and attachments that accept Series 1 Type 101 acetylene tips, including CA2460, CA2461, CA2462, ST2600FC, ST1000FC, ST900FC and HC1200C. The 3-101 series fits Victor-type and V-style light and medium duty torches. Check the series marked on the original tip before ordering, and note that the 1-101 set is not for propane and natural-gas systems.
For the wider fuel question, see our propane vs acetylene cutting torch guide and oxy-acetylene torch tips: sizes and uses.
Cutting torch tips for oxy fuel work
The sets below cover the sizes in the chart above, from 3/8 in to 2-1/2 in, so pick the size the metal calls for and check the series before ordering.
Side by side
| Tip set | Series | Sizes | Pack | Cutting range |
|---|---|---|---|---|
| ZANZANSUN 1-101 Set | 1-101 | 0 to 3 | 4 tips | 3/8 to 2-1/2 in, by size |
| Pidnsrozo 1-3-101 2PK | 3-101 | 1-3-101 | 2 tips | Not stated |
| JZWELD 2-1-101 | 1-101 | 2-1-101 | 2 tips | 1 to 1-1/2 in |
The ZANZANSUN set is the only set here that states a cutting range for every size it includes, which is why it leads this guide. The Pidnsrozo 2-pack covers the 1-3-101 size in the light and medium duty series, and the JZWELD 2-pack covers the 2-1-101 size in the heavy-duty series with a stated thickness.
Cleaning and care
The ZANZANSUN and Pidnsrozo sets include a tip cleaner. Allow the tip to cool completely before cleaning, inspect the tip face and gas openings for debris, blockage or visible damage before each use, and use only the matching-size tip cleaner with light pressure. Never force a cleaner into the openings, since improper cleaning may enlarge or damage the precision orifices.
For cleaners, see our best cutting torch tip cleaner tool roundup, and for the torch itself, best oxy acetylene torch kit for home shop.
For more options, see our welding consumables guides.
FAQ for welders
What size cutting torch tip do I need for 1/2 inch steel?
From the 1-101 chart in this guide, a 0-1-101 tip covers 3/8 to 1/2 in. Match the size to the thickest metal on the job, and check the series your torch takes before ordering.
What is the difference between 1-101 and 3-101 cutting tips?
The 1-101 series fits select Victor-style heavy-duty torches, while the 3-101 series fits Victor-type and V-style light and medium duty torches. The size steps run from 0 to 3 in each series, so the series, not the size figure, decides the fit.
Can I use a 1-101 tip on a torch that takes 3-101 tips?
No. The listings state the series each tip fits, and the 1-101 set warns it is not for 3-101 tips. Check the series marked on the original tip before ordering.
Do cutting torch tips work with propane?
The 1-101 set in this guide states it is not for propane and natural-gas systems. Every set here is an acetylene tip, so use the fuel gas the listing states.
Should I clean a cutting torch tip?
Yes, and the ZANZANSUN and Pidnsrozo sets here include a cleaner. Allow the tip to cool completely, use only the matching-size cleaner with light pressure, and never force it into the openings.
Related: cutting torch tips for oxygen acetylene cutting, oxy fuel cutting setup, and gas cutting torch vs gas welding torch.




