Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Gas Cutting Torch vs Gas Welding Torch: Which One Should You Buy?

The LISSAM and AWLOLWA cut steel with gas, while the GOSPOWOR and QWORK braze and weld: here is how they compare on capacity, fuel gas, flame temperature and fittings.

Gas Cutting Torch vs Gas Welding Torch: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LISSAM 62-3F H-Type Oxy Propane Cutting TorchLISSAM 62-3F H-Type Oxy Propane Cutting Torch9.6/10View on Amazon
  2. 2AWLOLWA V-Type Medium Duty Oxyacetylene CuttingAWLOLWA V-Type Medium Duty Oxyacetylene Cutting9.4/10View on Amazon
  3. 3GOSPOWOR High Intensity Propane Torch HeadGOSPOWOR High Intensity Propane Torch Head9.4/10View on Amazon
  4. 4QWORK Torch Tips, Swirl, CompatibleQWORK Torch Tips, Swirl, Compatible9.3/10View on Amazon

Verdict. In gas cutting torch vs gas welding torch, pick a cutting torch to cut steel plate: the LISSAM 62-3F cuts up to 300 mm and the AWLOLWA up to 3/4 inch. Pick a welding torch to braze or solder: the GOSPOWOR head runs on propane or MAPP, and the QWORK suits pipe work.

A cut and a weld ask for different tools, even when the tools burn gas from a cylinder. A cutting torch severs plate with an oxygen jet after the flame heats the steel, while the welding torches here heat metal for brazing and soldering, with no cutting jet. This comparison puts gas cutting torch vs gas welding torch side by side.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The torches

LISSAM 62-3F H-Type Oxy Propane Cutting Torch

LISSAM 62-3F H-Type Oxy Propane Cutting Torch

Lissam9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy duty oxy propane cutting torch with a 300 mm capacity, a one-piece body and a built-in safety plug, with the 6290NX-2 tip in the box.

Pros

  • 300 mm capacity with the included 6290NX-2 tip
  • One-piece body minimizes potential gas leak points
  • Triangular stainless steel tubes resist warping
  • Head mixing with a built-in safety plug in the torch head

Cons

  • Title says 11.8 inch (300 mm) but bullets say 11 inch
  • No flame temperature in the listing
  • Oxy propane only, with no acetylene use stated
  • No warranty term is stated
AWLOLWA V-Type Medium Duty Oxyacetylene Cutting

AWLOLWA V-Type Medium Duty Oxyacetylene Cutting

AWLOLWA9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A medium duty oxyacetylene cutting torch with a CA1350 attachment, a 100FC handle and a 1-3-101 tip for up to 3/4 inch steel.

Pros

  • Included 1-3-101 tip cuts up to 3/4 inch steel
  • Extra tips such as the 6-1-101 cut up to 8 inch steel
  • Die forged brass cutting tip
  • Handle, attachment and tip come in one set

Cons

  • The 8 inch figure needs a different tip
  • No flame temperature in the listing
  • No ignition type is stated
  • No warranty term is stated
GOSPOWOR High Intensity Propane Torch Head

GOSPOWOR High Intensity Propane Torch Head

Gospowor9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A trigger start propane torch head with a 4 ft hose and cylinder clip, rated at 3600°F on propane and 3730°F on MAPP gas for brazing and welding.

Pros

  • Flame burns at 3600°F on propane and 3730°F on MAPP gas
  • Trigger start self-ignition with one-click start and stop
  • 4 ft stainless steel hose, cylinder clip and hooks to hang the tank
  • Cast aluminum body with a pure brass flame lock

Cons

  • Fuel not included; the propane tank is not included
  • Solders copper pipes up to 3/4 inch; no steel cutting capacity is stated
  • Extended upside-down use is not recommended
  • No warranty term is stated
QWORK Torch Tips, Swirl, Compatible

QWORK Torch Tips, Swirl, Compatible

QWORK9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A self lighting swirl torch for MAP-Pro and LP gas, with 360 degree swivel tips for brazing, soldering and welding plumbing and refrigeration work.

Pros

  • 360 degree swivel tips reach hard-to-reach areas
  • Self lighting ignition with no extra ignition tools
  • Flame control switch adjusts the flame
  • Orifice screw can be cleaned for consistent performance

Cons

  • No flame temperature in the listing
  • No weight in the listing
  • Box contents are not stated in the listing
  • No warranty term is stated

Other welders and gear to compare

Gas cutting torch vs gas welding torch side by side

LISSAM 62-3F Oxy Propane Cutting Torch AWLOLWA V-Type Oxyacetylene Cutting Torch GOSPOWOR Propane Torch Head QWORK Swirl Torch Tips
Gear Score 71 57 55 52
Side Gas cutting torch Gas cutting torch Gas welding torch Gas welding torch
Fuel gas Oxy propane Oxyacetylene Propane, MAPP MAP-Pro, LP gas
Cutting capacity 300 mm with 6290NX-2 tip 3/4 in with included tip; 8 in with 6-1-101 tip, bought separately Not stated Not stated
Flame temperature Not stated Not stated 3600°F propane, 3730°F MAPP Not stated
Hose connection 9/16″-18 UNF 9/16″-18 4 ft hose, CGA600 Not stated
Ignition Not stated Not stated Trigger start, self-ignition Self lighting
Weight 2.65 lb 2.29 lb (table) 1.5 lb Not stated
In the box Torch and 6290NX-2 tip Handle, attachment and 1-3-101 tip Torch head, hose and cylinder clip Not stated
Warranty Not stated Not stated Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).

Cutting capacity

Only the cutting side states capacity. The LISSAM 62-3F is rated for 300 mm with the included 6290NX-2 tip, though its title says 11.8 inch and its bullets say 11 inch. The AWLOLWA cuts up to 3/4 inch steel with the included 1-3-101 tip, and tips such as the 6-1-101, bought separately, cut up to 8 inch steel.

Fuel gas and flame

The AWLOLWA runs on oxyacetylene and the LISSAM on oxy propane, each taking oxygen plus a fuel gas. The GOSPOWOR runs on propane or MAPP gas, with a flame that burns at 3600°F on propane and 3730°F on MAPP gas, and it solders copper pipes up to 3/4 inch. The QWORK runs on MAP-Pro or LP gas and states no flame temperature.

Hose connections and fittings

Both cutting torches use a 9/16″-18 hose connection, and the LISSAM spells out the threads as 9/16″-18 UNF, right-hand for oxygen and left-hand for fuel gas. The GOSPOWOR uses a 4 ft stainless steel hose with a CGA600 connector and cylinder clip. The QWORK states no hose connection or fitting size.

Ignition and flame control

Neither cutting torch states an ignition type. The GOSPOWOR lights with a trigger start and self-ignition, and one click starts or stops the flame. The QWORK lights itself too, with self lighting ignition and a flame control switch. The LISSAM lists dual stainless steel valves.

Weight and build

The GOSPOWOR lists 1.5 lb with a cast aluminum body. The LISSAM weighs 2.65 lb with a one-piece body. The AWLOLWA lists 2.29 lb in its table. The QWORK lists no weight.

What is in the box

The AWLOLWA set holds a handle, an attachment and a 1-3-101 tip. The LISSAM ships fully assembled with a 6290NX-2 tip. The GOSPOWOR ships as a torch head with a hose and cylinder clip. The QWORK listing states no box contents.

Warranty

None of the four listings states a warranty term, so warranty scores zero across the set.

Choose a gas cutting torch if

  • You cut steel plate and need an oxygen jet.
  • You run acetylene and want the AWLOLWA set with its CA1350 attachment.
  • You run propane and want the LISSAM safety plug and 300 mm capacity.

Choose a gas welding torch if

  • You braze or solder and need a flame, not a cutting jet.
  • You want a trigger start head on a hose, and the GOSPOWOR fits 1 lb cylinders.
  • You work pipe and fittings with MAP-Pro or LP gas and want QWORK swivel tips.

Before You Strike an Arc

  • Match the hose fittings before you connect anything: both cutting torches use 9/16″-18 connections.
  • Confirm the fuel gas: oxyacetylene for the AWLOLWA, oxy propane for the LISSAM, propane or MAPP for the GOSPOWOR, MAP-Pro or LP gas for the QWORK.
  • Keep an ABC extinguisher and water nearby, and check every connection for leaks.

FAQ for welders

What gas do cutting torches use?

It depends on the torch. The AWLOLWA runs on oxyacetylene and the LISSAM on oxy propane, so each cutting torch takes oxygen plus a fuel gas.

How do you set up an oxy acetylene cutting torch?

The AWLOLWA listing states the set as a 100FC handle, a CA1350 attachment and a 1-3-101 tip, with a 9/16″-18 hose connection. The listing does not state setup steps.

Can a gas welding torch cut steel?

Not on the evidence here. The GOSPOWOR and the QWORK state no cutting capacity: the GOSPOWOR solders copper pipes up to 3/4 inch.

What is the difference between a gas cutting torch and a gas welding torch?

A cutting torch adds an oxygen jet that severs steel after the flame heats it. A welding torch joins or solders metal with a flame and no cutting jet.

Related: best heavy duty cutting torch, brazing torch vs cutting torch, propane vs acetylene cutting torch, and the welding consumables hub. Also see our best propane torch for brazing.

Scoring, line by line

Each torch is scored on performance, build, value, safety and warranty, using the weights the site publishes. Missing specs cost marks, so the QWORK trails the set.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LISSAM 62-3F Oxy Propane Cutting Torch 9.6 32 22 20 7 0
AWLOLWA V-Type Oxyacetylene Cutting Torch 9.4 29 20 20 0 0
GOSPOWOR Propane Torch Head 9.4 28 20 19 0 0
QWORK Swirl Torch Tips 9.3 26 19 19 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides