Oxy Fuel Cutting Setup: Torch, Tips and Gas Hoses
An oxy fuel cutting setup pairs a torch, cutting and welding tips, regulators and a twin hose, and the kits here cover that work for home and farm shops.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Cutting Torch Set Oxy Acetylene Torch Kit9.7/10View on Amazon - 2
VEVOR Oxygen Acetylene Torch Kit with Check9.6/10View on Amazon - 3
RX WELD Medium Duty Oxy-Fuel Welding and Cutting9.6/10View on Amazon - 4
XtremepowerUS Oxygen Acetylene Welding & Cutting9.5/10View on Amazon
A plate that needs a straight cut and no power nearby is the classic job for an oxy fuel cutting setup. The setup is a torch with cutting and welding tips, regulators and a twin hose that feeds oxygen and acetylene from separate cylinders to the torch. With the regulators set and the hoses connected, the flame heats the steel to ignition temperature, then a jet of oxygen burns through the heated steel. This guide walks through each part of the setup, how the pieces connect, and which of the kits in this guide fits the job.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Cutting Torch Set Oxy Acetylene Torch Kit
A portable oxy acetylene kit with a built-in flashback arrestor, 3 welding nozzles and 1 cutting tip, plus goggles, a spark lighter and a storage box.
Pros
- Built-in flashback arrestor and reverse flow check valve in the cutting torch handle
- 3 welding nozzles (#0, #2 and #4) and 1 cutting tip (#1) in the box
- Welding capacity 3/4 inch stated, with stainless steel and brass tips
- 15 ft twin hose plus goggles, spark lighter, tip cleaner, spanner and storage box
Cons
- Cutting capacity reads 1/8 inch in a line and up to 6 inches in another
- No warranty term is stated
- CGA connector sizes are not stated
- Hose pressure limit is not stated

VEVOR Oxygen Acetylene Torch Kit with Check
A portable oxy acetylene kit with 2 external check valves, 3 welding tips and 1 cutting tip, a 15 ft twin hose rated to 300 PSI, and a toolbox.
Pros
- 2 external check valves to stop gas backflow
- 3 welding tips (#0, #2 and #4) and 1 cutting tip (#1)
- 15 ft twin hose rated to 300 PSI, R-grade
- 2 regulators: CGA-540 oxygen and CGA-510 acetylene
Cons
- Cutting thickness is not stated
- Welding thickness is not stated
- No warranty term is stated
- CGA-510 connection is not compatible with MC or B-type acetylene cylinders

RX WELD Medium Duty Oxy-Fuel Welding and Cutting
A medium-duty oxy acetylene torch kit with a B-size regulator, 2.5 inch diameter regulators, a 15 ft hose and a double O-ring seal on the cutting torch.
Pros
- Cuts up to 6 inches and welds or brazes up to 1/2 inch with appropriate tips
- 2.5 inch diameter regulators with CGA-510 acetylene and CGA-540 oxygen connectors
- Double O-ring seal on the cutting torch for a quick, airtight seal without a wrench
- 15 ft oxygen acetylene hose, 1/4 inch, with 9/16-18 B fittings
Cons
- No warranty term is stated
- Tip sizes are not stated
- Cylinders are not included
- Item weight is not stated

XtremepowerUS Oxygen Acetylene Welding & Cutting
An oxy acetylene torch kit with 3 welding nozzles, CGA 540 regulator gauges, an 11.5 ft twin hose, safety goggles and a carrying case, with a 60 day warranty.
Pros
- Cuts steel up to 6 inches with appropriate cutting tips
- Welds or brazes up to 1/2 inch with appropriate tips
- 3 welding nozzles, safety goggles and a carrying case in the box
- 60 day manufacturer warranty stated in the listing
Cons
- 11.5 ft twin hose is shorter than the 15 ft hoses here
- Cutting tip count is not stated
- Flashback protection is not stated
- Oxygen and acetylene cylinders are sold separately
What an oxy fuel cutting setup includes
A full setup centers on a torch handle with a cutting attachment, welding and cutting tips, 2 regulators, and a twin hose. The torch handle holds the cutting attachment and the welding tips, and the regulators sit on the cylinders. The twin hose carries oxygen and acetylene in separate lines from the regulators to the torch. The kits in this guide also add goggles, a spark lighter, a tip cleaner, a spanner or a carrying case.
- Torch handle and cutting attachment. The handle takes the cutting attachment and the welding tips. The iMeshbean handle has a built-in flashback arrestor and a reverse flow check valve.
- Tips. The VEVOR and iMeshbean kits list 3 welding tips and 1 cutting tip, with welding tips numbered #0, #2 and #4 and the cutting tip numbered #1.
- Regulators. Each kit here has 2 regulators, an oxygen regulator and an acetylene regulator. The RX WELD regulators (on Amazon) are 2.5 inches in diameter, and the VEVOR regulators are CGA-540 for oxygen and CGA-510 for acetylene.
- Twin hose. The hose carries oxygen and acetylene to the torch. The RX WELD, VEVOR and iMeshbean kits list a 15 ft hose, and the XtremepowerUS kit (on Amazon) lists an 11.5 ft twin hose.
How the gas flows from cylinder to cut
Oxygen and acetylene leave separate cylinders, pass through a regulator for each gas, and travel down the twin hose to the torch. The regulators drop cylinder pressure to a working pressure, and the XtremepowerUS gauges show that pressure while you work. The VEVOR kit adds 2 external check valves to stop gas backflow, and the iMeshbean handle has a built-in flashback arrestor and a reverse flow check valve. The RX WELD cutting torch uses a double O-ring seal for a quick, airtight seal without a wrench.
Check the connectors before you buy: the RX WELD kit uses CGA-510 for acetylene and CGA-540 for oxygen, and the listing states the CGA-510 connection excludes MC and B sizes. The VEVOR kit uses the same connectors and states the CGA-510 connection is not compatible with MC or B-type acetylene cylinders. The iMeshbean listing does not state CGA connector sizes. The XtremepowerUS listing states CGA 540 for the oxygen regulator gauges, so check the acetylene connector before you order.
A plasma cutter is the other common way to cut steel in a home shop, and the plasma cutter picks cover machines for home and farm shops. For thin steel where a flame is too much heat, wire feed work is the other route, and the best flux core welder guide covers gasless machines. More cutting and fabrication gear sits in the metal fab tools hub.
The kits: torch, tips and gas hoses
The cut starts at the torch, so the kit you pick decides the tips, the hose length and the regulators you get.
Side by side
| Gear Score | Cut capacity | Weld capacity | Hose length | |
|---|---|---|---|---|
| iMeshbean Torch Kit | 9.7/10 | Cut up to 6 in | Weld up to 3/4 in | 15 ft |
| VEVOR Torch Kit | 9.6/10 | Not stated | Not stated | 15 ft |
| RX WELD Medium Duty Kit | 9.6/10 | Cut up to 6 in | Weld and braze up to 1/2 in | 15 ft |
| XtremepowerUS Torch Kit | 9.5/10 | Cut up to 6 in | Weld and braze up to 1/2 in | 11.5 ft |
The table reads the listings as written: unstated figures read Not stated. The iMeshbean kit leads on stated capacity and accessories, and the XtremepowerUS kit is the only kit here with a stated warranty.
Setting up the torch
Set the cylinders upright and chain them so they cannot fall, then fit the regulators to the matching cylinder valves: CGA-540 for oxygen and CGA-510 for acetylene on the kits here that state them. Connect the twin hose to the regulators and the torch, with each line on its own fitting. Open the cylinder valves, set the regulators, and check each joint for leaks with soapy water. Light the torch with a spark lighter, heat the edge of the steel until it glows, then open the oxygen lever. Keep the tip clean with a tip cleaner, then close the torch valves and shut the cylinders when the cut is done.
Safety checks before you cut
Oxy fuel work means compressed gas, an open flame and hot metal, so clear the area of anything flammable and keep a fire extinguisher within reach. Ventilate the space or work outdoors, and keep your head out of the fume plume. Wear shaded cutting goggles, gloves and flame-resistant clothing. Check the hoses for wear before each use, and ask a repair shop if a regulator or torch leaks.
FAQ for welders
What gas does an oxy fuel cutting setup use?
An oxy fuel cutting setup uses oxygen and acetylene from separate cylinders. The RX WELD and VEVOR kits use CGA-540 for the oxygen regulator and CGA-510 for the acetylene regulator. The iMeshbean listing does not state CGA connector sizes; the XtremepowerUS listing states CGA 540 for the oxygen regulator gauges.
How thick can an oxy fuel torch cut?
The RX WELD, iMeshbean and XtremepowerUS kits state a cut up to 6 inches with the appropriate tips. The iMeshbean listing also reads a cutting capacity of 1/8 inch in a line, which conflicts with its 6 inch claim. The VEVOR listing does not state a cutting thickness.
Do oxy fuel kits include gas cylinders?
The RX WELD kit states that cylinders are not included, and the XtremepowerUS kit states that oxygen and acetylene cylinders are sold separately. The VEVOR and iMeshbean listings do not state whether cylinders are included, so match the CGA-510 and CGA-540 connectors to your cylinders.
What keeps gas from flowing back into the torch?
A check valve stops gas flowing back toward the regulators, while a flashback arrestor stops a flame traveling back down the hose. The VEVOR kit has 2 external check valves that stop gas backflow, and the iMeshbean handle has a built-in flashback arrestor and a reverse flow check valve. The XtremepowerUS listing does not state flashback protection.
Related: metal fab tools, plasma cutter picks, best flux core welder, and how to choose a MIG welder.




