Best Gloves for Oxy-Fuel Welding (2026): 5 Picks
Five welding gloves for oxy-fuel work compared: 932°F heat ratings, 16 to 23.6 inch coverage, Kevlar stitching, and stated ANSI heat levels.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
TOPDC Welding Gloves 16-Inch 932°F Heat Resistant9.5/10View on Amazon - 2
RAPICCA Welding Gloves for Men9.5/10View on Amazon - 3
IRONCAT 6141 Kidskin TIG Welding Gloves – Medium9.4/10View on Amazon - 4
YESWELDER 23.6 Inches 932℉ Leather Forge MIG9.4/10View on Amazon - 5
Black Stallion Unisex Adult Top Grain Leather9.3/10View on Amazon
Finding the right gloves for oxy-fuel welding starts with the work: torch cutting and brazing throw heat, sparks and hot metal at your hands and forearms, so the glove needs heat resistance first and dexterity second. These five gloves cover the range, from the TOPDC 16-inch glove with a stated ANSI/ISEA heat level 5 to the IRONCAT kidskin TIG glove built for fingertip control. We have not used these gloves ourselves; this guide is based on the listings on Amazon and the specs published there.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The machines

TOPDC Welding Gloves 16-Inch 932°F Heat Resistant
TOPDC's 16-inch welding glove with 932°F heat resistance, 1.2mm cowhide, Kevlar stitching and a stated ANSI/ISEA heat level 5.
Pros
- Stated ANSI/ISEA heat level 5, the highest here.
- 932°F heat resistance with 1.2mm cowhide.
- Kevlar stitching with double leather reinforcement.
- 16-inch length with 7.5-inch sleeve for forearm coverage.
Cons
- No warranty; the listing states none.
- At 8 oz it is heavier than TIG gloves.
- 16-inch length is mid-pack here.
- Not water resistant per the listing.

RAPICCA Welding Gloves for Men
RAPICCA's 16-inch welding glove with 932°F heat resistance, layered leather, foil and cotton construction, Kevlar stitching and ANSI heat level 4.
Pros
- Stated ANSI/ISEA heat level 4 with 932°F resistance.
- Layered build: leather, aluminum foil and cotton liner.
- Kevlar stitching with reinforced stress points.
- 16-inch length with 7.5-inch sleeves.
Cons
- No warranty term is stated in the listing.
- 0.48 kg is heavier than the TOPDC.
- Blue color shows shop grime.
- Not water resistant per the listing.

IRONCAT 6141 Kidskin TIG Welding Gloves – Medium
IRONCAT's kidskin TIG welding glove with Kevlar thread, 4-inch gold cuff and stated ANSI heat level 3 and impact level 2.
Pros
- Top grain kidskin for the best dexterity here.
- Kevlar thread protects the seams from sparks.
- Stated ANSI heat level 3 and impact level 2.
- 4-inch gold cuff with straight thumb for grip.
Cons
- No real warranty term; 'limited warranty' names no term.
- 11.75-inch length gives less forearm coverage.
- Unlined, so no insulation layer for heat.
- Medium size only in this listing.

YESWELDER 23.6 Inches 932℉ Leather Forge MIG
YESWELDER's 23.6-inch forge and welding glove with 932°F heat resistance, cowhide leather and Kevlar stitching.
Pros
- 23.6-inch length, the most forearm coverage here.
- 932°F heat resistance stated.
- Heavy-duty cowhide with Kevlar stitching.
- Reinforced fingers, palm, wrist and back.
Cons
- No warranty term is stated in the listing.
- No ANSI level stated.
- 23.6-inch length is bulky for fine work.
- One size long may not fit smaller hands.

Black Stallion Unisex Adult Top Grain Leather
Black Stallion's top grain cowhide MIG welding glove with Kevlar stitching, cotton lining and machine-washable construction.
Pros
- Top grain cowhide with Kevlar stitching.
- Cotton lining for comfort.
- Machine washable per the listing.
- Reinforced palm and thumb.
Cons
- No heat rating is stated in the listing.
- Warranty line says 'see label', no term.
- Short sleeve gives less forearm coverage.
- Large size only in this listing.
Other welders and gear to compare
Caiman Premium Split Cowhide MIG/Stick Welding GlovesCheck price on Amazon
RAPICCA MIG Welding Gloves for MenCheck price on Amazon
TOPDC Welding Gloves 16Inch 1000℉ Heat Resistant Leather forCheck price on Amazon
TOPDC 14Inch Welding Gloves 482°F Heat Resistant Leather forCheck price on Amazon
TOPDC TIG Welding Gloves 14InCheck price on Amazon
OZERO Welding Gloves: 932°F Heat Resistant GlovesCheck price on Amazon
Spec sheet comparison
| Glove | Score | Heat rating | Length | Leather | Warranty |
|---|---|---|---|---|---|
| TOPDC 16-in | 9.5/10 | 932°F, ANSI 5 | 16 in | 1.2mm cowhide | Not stated |
| RAPICCA 16-in | 9.5/10 | 932°F, ANSI 4 | 16 in | 1.5mm | Not stated |
| YESWELDER 23.6-in | 9.4/10 | 932°F | 23.6 in | Cowhide | Not stated |
| IRONCAT TIG | 9.4/10 | ANSI 3 | 11.75 in | Kidskin 0.5mm | Limited, no term |
| Black Stallion | 9.3/10 | Not stated | Standard | Top grain cowhide | See label |
Ratings in this table are the makers’ own claims taken from each product page (19 October 2026). No listing states a warranty term.
Buying guide: gloves for oxy-fuel welding
Heat rating first
Oxy-fuel work means open flame and hot metal, so the heat rating is the first spec to compare. The TOPDC states ANSI/ISEA heat level 5 with 932°F resistance, the RAPICCA states heat level 4 with the same 932°F figure, and the IRONCAT states heat level 3. The YESWELDER states 932°F with no ANSI level, and the Black Stallion states no heat rating. A stated ANSI level is a testable claim; an unstated one is marketing. See our welding gloves for high heat guide for more.
Length protects the forearm
Torch work sprays sparks up the arm, so length matters. The YESWELDER runs 23.6 inches, the longest here, while the RAPICCA and TOPDC are 16-inch gloves with 7.5-inch sleeves. The IRONCAT is an 11.75-inch TIG glove with a 4-inch cuff, built for dexterity rather than coverage. For cutting and heating, longer is better; for brazing small joints, the shorter TIG glove gives control.
Dexterity versus protection
Thick gloves protect; thin gloves feel. The IRONCAT kidskin TIG glove is the dexterity pick at 0.5mm leather with a straight thumb for grip. The RAPICCA and TOPDC use 1.5mm and 1.2mm leather with reinforced palms for heavy work. Oxy-fuel welding sits in the middle: you handle the torch and filler rod, so you need feel, but sparks demand coverage. Our welding gloves for dexterity guide covers the tradeoff.
Stitching and liners
Every listing here states Kevlar stitching, which resists sparks at the seams where thread fails first. Liners differ: the RAPICCA layers fire-resistant leather, aluminum foil and cotton; the TOPDC uses split cowhide with cotton lining and a foil palm layer; the IRONCAT is unlined kidskin for feel. The Black Stallion is machine washable per its listing, a rarity here; the others call for hand washing.
FAQ for welders
What gloves do I need for oxy-fuel welding?
Heat-resistant leather gloves with forearm coverage. The 16-inch RAPICCA and TOPDC and the 23.6-inch YESWELDER cover the arm; the TIG-style IRONCAT suits fine brazing.
What does ANSI/ISEA heat level mean?
It is a standardized heat-resistance rating. The TOPDC states level 5, the RAPICCA level 4, and the IRONCAT level 3; higher is more protective.
Can I use TIG gloves for oxy-fuel work?
For light brazing, yes: the IRONCAT kidskin glove gives the dexterity for filler rod work. For cutting and heating with heavy sparks, use a longer, thicker glove.
Do any of these have a warranty?
No. The TOPDC states no warranty, the Black Stallion says see the label, the IRONCAT names a limited warranty with no term, and the others state nothing.
How do I clean welding gloves?
The Black Stallion listing states machine wash. The others state hand wash. Follow the listing’s care line to preserve the leather and stitching.
Scoring, line by line
Each glove is scored on performance, build, value, safety and warranty, from the listing figures. Heat rating and length drive performance, leather and stitching drive build, and stated ANSI levels drive safety. No listing states a warranty term, so warranty scores are zero across the board. The TOPDC leads on its stated heat level 5; the RAPICCA follows on its 16-inch coverage.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TOPDC 16-in | 9.5 | 28 | 20 | 19 | 8 | 0 |
| RAPICCA 16-in | 9.5 | 28 | 21 | 19 | 7 | 0 |
| IRONCAT TIG | 9.4 | 23 | 20 | 19 | 7 | 0 |
| YESWELDER 23.6-in | 9.4 | 29 | 20 | 19 | 0 | 0 |
| Black Stallion | 9.3 | 21 | 20 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
More welding guides
Related: our leather welding gloves and TIG welding gloves guides, and the welding safety gear category.




