Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cut Resistant Gloves Chart by Cut Level

A cut resistant gloves chart matches the cut level to the hazard: A7 for medium to heavy cut hazards and A1 for light work.

Cut Resistant Gloves Chart by Cut Level
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Schwer 2 Pairs A7 Cut Resistant Work GlovesSchwer 2 Pairs A7 Cut Resistant Work Gloves9.7/10View on Amazon
  2. 2Klein Tools 60581 A1 Cut-Resistant Work GlovesKlein Tools 60581 A1 Cut-Resistant Work Gloves9.5/10View on Amazon

Sharp edges show up in every corner of a fab shop: fresh cut sheet, stamped parts, slit coil and glass. A cut resistant gloves chart sorts gloves by the cut level the maker states, so the glove matches the hazard instead of guessing by feel. This guide reads the chart for shop work, explains each level in plain terms, and shows the gloves behind each level.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Schwer 2 Pairs A7 Cut Resistant Work Gloves

Schwer 2 Pairs A7 Cut Resistant Work Gloves

Schwer9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An ANSI A7 glove for medium to heavy cut hazards, with a sandy nitrile coating for grip and touchscreen compatibility for shop and site work.

Pros

  • ANSI A7 cut resistance for medium to heavy cut hazards
  • Sandy nitrile coating grips in wet and greasy conditions
  • Touchscreen compatible, so a phone or tablet works without removing the gloves
  • Washable and reusable, sold as a pack of 2 pairs

Cons

  • Only size listed is Large
  • A7 level is more glove than light handling work calls for
  • Warranty help needs contact within 30 days of receiving the gloves
  • Both pairs in the pack are the same Large size
Klein Tools 60581 A1 Cut-Resistant Work Gloves

Klein Tools 60581 A1 Cut-Resistant Work Gloves

KLEIN TOOLS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An ANSI A1 glove for light cut hazards, with a microfoam nitrile dip for grip and a snug nylon-spandex knit for detailed work.

Pros

  • ANSI A1 cut resistance for light cut hazards
  • Microfoam nitrile dip grips in dry, oily and wet conditions
  • Nylon-spandex knit conforms to the hand for detailed work
  • Touchscreen capable fingertips, and machine washable

Cons

  • A1 is a light level of cut resistance, not for medium to heavy cut hazards
  • Only size listed is Large
  • No warranty term is stated; the listing points to the maker website
  • Light knit is not the glove for sharp sheet metal edges

Cut resistant gloves chart

The chart below lists the cut levels the gloves in this guide state, with the work each level suits.

Cut level What it suits Glove in this guide
A1 Light cut hazards and everyday handling Klein Tools 60581
A7 Medium to heavy cut hazards, metal stamping and slitter blades Schwer CR3027

Match the level to the sharpest edge the job puts near the hand, not to the average edge. A glove that suits light handling will not cover work with slitter blades or stampings, and a heavy glove slows fine work that never meets a sharp edge.

How to read the chart

Read the chart from the hazard, not from the glove. Start with the sharpest material the hands will touch, find the level that covers it, then check coating and fit. The level comes from the maker, so compare levels only between gloves that state the same standard.

Coating decides grip. A sandy nitrile coating holds in wet and greasy conditions, while a microfoam nitrile dip holds in dry, oily and wet conditions. Both gloves here state touchscreen use, so a phone or tablet stays usable without removing the gloves.

Fit decides whether the glove stays on for the whole job. Both gloves in this guide list Large, so hands that need another size need a different listing. A glove that bunches at the fingertips costs dexterity, and a tight cuff costs comfort over a long shift.

The gloves in this chart

The gloves below cover the levels in the chart: the A7 glove handles the heavier hazards, and the A1 glove handles light work and detailed work.

Side by side

Gear Score Cut level Coating Pack
Schwer A7 CR3027 9.7/10 ANSI A7 Sandy nitrile 2 pairs
Klein Tools 60581 9.5/10 ANSI A1 Microfoam nitrile 2 pairs

Fit, care and limits

Both gloves wash and reuse: the Schwer pair is washable and reusable, and the Klein pair is machine washable. Wash them when the coating loads up with grime, and let them dry before the next shift.

Cut resistance covers cuts, not every shop hazard. Gloves stay off near rotating parts on drill presses, grinders, saws and lathes, where a glove can catch and pull a hand in. For hot work, sparks and arc flash, use the helmet and clothing the job calls for, not a cut glove.

Check the gloves on arrival: look for a snug cuff, fingertips that reach the end of each finger, and coating that covers the palm without bare spots. A pair that fits wrong will not stay on, and a glove left in the drawer protects nothing.

FAQ for welders

What does ANSI A7 mean on a work glove?

ANSI A7 is a cut level the maker states for medium to heavy cut hazards. The Schwer glove in this guide states A7 and names automotive assembly, metal stamping and handling slitter blades as the work it suits. A higher level suits sharper edges and heavier hazards than a light level.

What does ANSI A1 mean on a work glove?

ANSI A1 is a light level of cut resistance. The Klein glove in this guide states A1 and suits everyday work where the cut hazard stays light. It keeps dexterity for detailed work, but it is not the glove for sharp sheet metal edges or heavier hazards.

Can cut resistant gloves be washed?

Yes. The Schwer gloves are washable and reusable, and the Klein gloves are machine washable. Wash them when the coating loads up with grime, then let them dry before the next use.

Do cut resistant gloves work with a touchscreen?

Both gloves in this guide state touchscreen use. The Schwer pair is touchscreen compatible, and the Klein pair has touchscreen capable fingertips, so a phone or tablet stays usable without removing the gloves.

Should gloves be worn near rotating machines?

No. Gloves stay off near rotating parts on drill presses, grinders, saws and lathes, where a glove can catch and pull a hand in. Wear eye and face protection there instead, clamp the work, and keep guards in place.

Related: best cut resistant gloves, best cut resistant gloves for sheet metal, cut resistant gloves safety, and the welding safety gear hub. Also see how to clean leather work gloves.

More buying guides