Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Clean Leather Work Gloves

How to clean leather work gloves with a damp cloth and mild soap, what not to do, and which gloves stand up to regular cleaning.

How to Clean Leather Work Gloves
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Welding Gloves 16” – 932°F Heat Resistant LeatherWelding Gloves 16” – 932°F Heat Resistant Leather9.7/10View on Amazon
  2. 2Tillman 1414L 1414 Unlined Cowhide Leather DriversTillman 1414L 1414 Unlined Cowhide Leather Drivers9.6/10View on Amazon
  3. 3ATERET 12 Pairs Medium Heavy Duty Durable CowhideATERET 12 Pairs Medium Heavy Duty Durable Cowhide9.6/10View on Amazon
  4. 4Bunnycool 12 Pairs Bulk Leather Work GlovesBunnycool 12 Pairs Bulk Leather Work Gloves9.5/10View on Amazon

A day of welding leaves leather gloves stiff with sweat, dust and spatter, and a pair that stays dirty wears out fast. How to clean leather work gloves comes down to gentle steps: brush off the loose dirt, wipe with a damp cloth, work in a little mild soap, and let them air dry away from heat. The steps below keep the leather supple without soaking it, and the gloves at the end show which types stand up to regular cleaning.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Welding Gloves 16” – 932°F Heat Resistant Leather

Welding Gloves 16” – 932°F Heat Resistant Leather

PROTEGRE9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-inch cowhide glove rated to 932°F with Kevlar stitching, a 7.5-inch forearm sleeve and an insulated lining for welding, grilling and hot work.

Pros

  • Rated to 932°F with a 16-inch length and a 7.5-inch forearm sleeve
  • 1.2mm cowhide leather with Kevlar stitching at stress points
  • Aluminum foil insulation and a flame-retardant cotton liner
  • Suits welding, MIG and TIG work, grilling, fireplace and forge tasks

Cons

  • Warranty description reads No Warranty
  • Single pair, not a bulk pack
  • No size options are listed beyond 16
  • Blue and yellow color shows soot and grime
Tillman 1414L 1414 Unlined Cowhide Leather Drivers

Tillman 1414L 1414 Unlined Cowhide Leather Drivers

Tillman9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An unlined cowhide drivers glove in a 12-pair pack, in white and yellow, for welding, driving and shop work.

Pros

  • Unlined cowhide, so nothing inside holds sweat after cleaning
  • 12 pairs in the pack, so a fresh pair is always ready
  • White and yellow color for visibility
  • Listed for welding and heat resistant work

Cons

  • No warranty term is stated
  • No heat rating is stated
ATERET 12 Pairs Medium Heavy Duty Durable Cowhide

ATERET 12 Pairs Medium Heavy Duty Durable Cowhide

ATERET9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-pair pack of medium grain cowhide drivers gloves with a full leather palm and keystone thumb for driving, warehouse and garden work.

Pros

  • Full leather palm in 100% grain cowhide leather
  • Keystone thumb for fit and movement
  • 12 pairs of medium gloves in the pack
  • Listed for construction, warehousing, driving, farming and gardening

Cons

  • No warranty term is stated
  • No heat rating is stated
  • Medium size only in this listing
  • No lining is described
Bunnycool 12 Pairs Bulk Leather Work Gloves

Bunnycool 12 Pairs Bulk Leather Work Gloves

Bunnycool9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-pair pack of cowhide drivers gloves in yellow and white, about 4.72 by 10.24 inches, for welding, driving, construction and farm work.

Pros

  • 12 pairs in the pack for work, home and shop
  • Cowhide leather, soft and hard-wearing per the listing
  • White and yellow for visibility in dim light
  • Listed for welding, driving, gardening, metalworking and forklift use

Cons

  • No warranty term is stated
  • No heat rating is stated
  • A single size is listed for all hands

How to clean leather work gloves, step by step

Clean gloves soon after the job, while dirt and sweat are still loose on the surface. Work through the steps in order, and let the gloves dry fully before the next use.

  1. Shake and brush off loose dirt. Hold the gloves by the cuff and shake them out, then brush the palms and fingers with a stiff brush or a dry cloth. Most dust and dry grime comes off here, before any water touches the leather.
  2. Wipe with a damp cloth. Dampen a clean cloth, wring it out, and wipe the outside of each glove. Work from the cuff toward the fingers so grime moves off the glove instead of into the seams.
  3. Work in mild soap where stains stay. Put a small amount of mild soap on the damp cloth and rub stained spots in small circles. Wipe the soap away with a fresh damp cloth, and repeat on stubborn spots rather than soaking the leather.
  4. Clean the inside if sweat has built up. Turn the cuff back and wipe the lining with a damp cloth. Unlined gloves dry out fast; a lined glove needs the cuff held open so air reaches the lining.
  5. Air dry away from direct heat. Lay the gloves flat or hang them by the cuff in moving air, away from a stove, radiator or direct sun. Heat dries leather fast and leaves it stiff and cracked.
  6. Flex the gloves once dry. Work the fingers and bend the palms so the leather softens again before the next job. A glove that feels stiff after drying usually loosens with a little flexing.
  7. Store dry and flat. Keep clean gloves in a dry place, away from damp and sharp edges, so they hold their shape between jobs.

What not to do with leather work gloves

Do not soak leather gloves in water, and do not put them in a washing machine: soaking swells the leather and leaves it stiff as it dries. Do not dry gloves on a stove, radiator or in direct sun, since direct heat cracks the surface. Do not use harsh solvents or strong cleaners on the leather, and do not store gloves damp, since damp leather holds odor and stiffens.

The gloves side by side

Leather Pack Heat rating
PROTEGRE 16-Inch Cowhide, 1.2mm 1 pair 932°F
Tillman 1414L Cowhide, unlined 12 pairs Not stated
ATERET 12-Pair Cowhide Cowhide, grain 12 pairs Not stated
Bunnycool 12-Pair Cowhide Cowhide 12 pairs Not stated

The table shows the split in this set: a long heat-resistant glove for hot work beside bulk packs of cowhide drivers gloves for everyday shop, driving and garden work.

Leather work gloves for the shop

The gloves below are the ones this cleaning routine applies to: cowhide drivers gloves in bulk packs and a long heat-resistant pair for welding and hot work.

For more options, see our welding safety gear guides.

FAQ for welders

Can leather work gloves be washed with water?

Yes, with a damp cloth and a little mild soap, not a soak. Wipe the outside, work soap into stained spots, wipe the soap away with a fresh damp cloth, and let the gloves air dry away from direct heat. Soaking swells the leather and leaves it stiff.

How do I dry leather work gloves?

Air dry them flat or hung by the cuff in moving air, away from a stove, radiator or direct sun. Heat dries leather fast and leaves it stiff and cracked. Flex the fingers once dry so the leather softens again.

Can I machine wash leather work gloves?

No. A washing machine soaks the leather, and soaked leather dries stiff. Stick to the damp cloth and mild soap routine above, and clean gloves soon after the job while dirt is still loose.

How do I clean the inside of leather gloves?

Turn the cuff back and wipe the lining with a damp cloth, then hold the cuff open so air reaches inside while the glove dries. Unlined gloves dry out fast; a lined glove like the 16-inch PROTEGRE pair needs more air time because the lining holds moisture.

Do lined gloves take longer to dry than unlined gloves?

Yes. A lining holds moisture inside the glove, so a lined pair needs the cuff held open and more air time than an unlined drivers glove. The unlined Tillman 1414L (on Amazon) has no lining to hold sweat, so it dries out fast after a wipe.

Related: leather vs synthetic welding gloves, gauntlet vs short welding gloves, full grain vs split leather welding gloves and welding gloves vs work gloves.

More buying guides