Best Cut Resistant Gloves (2026): 4 Picks, ANSI A4 to A9
4 cut resistant gloves for shop work, compared on stated cut level, palm coating, fit and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSchwer ProGuard A99.7/10View on Amazon - 2
Best Bulk PackLOCCEF A4 12-Pack9.5/10View on Amazon - 3
Best Cut Level RangeCOOLJOB 12-Pack A2-A99.5/10View on Amazon
Deburring a fresh cut leaves a keen edge along the whole part, and the first time that edge kisses a bare knuckle you start shopping for the best cut resistant gloves. This roundup compares the picks on what each listing states: cut level, palm coating, fit, pack size and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.
Quick picks
- Best Overall Schwer ProGuard A9: The highest stated cut level here, ANSI A9, with a sandy nitrile palm, touchscreen fingers and a limited lifetime warranty in the listing. Check price on Amazon
- Best Bulk Pack LOCCEF A4 12-Pack: 12 pairs at Level 5/A4 with a touchscreen, snug fit and a stated 1 year manufacturer warranty. Check price on Amazon
- Best Cut Level Range COOLJOB 12-Pack A2-A9: 12 pairs spanning ANSI A2 to A9 in a 13/18 gauge shell with a PU coated palm and machine wash in the listing. Check price on Amazon
The machines

Schwer ProGuard High Level Cut Resistant Work
ANSI A9 cut level gloves with a metal wire and HPPE liner, sandy nitrile palm, reinforced thumb and touchscreen, backed by a limited lifetime warranty.
Pros
- ANSI A9, the highest cut level stated here
- Sandy nitrile palm with reinforced thumb crotch for grip
- Touchscreen fingers work with phones and tablets, per the listing
- Limited lifetime warranty; contact the maker within 30 days if unhappy
Cons
- Sold as 1 pair, the only single pair pack here
- No glove dimensions or weight stated
- Bracelet sleeve coverage, not a long cuff
- The ten times stronger claim is marketing, not a measured figure

Level 5/A4 Cut Resistant Work Gloves, Touchscreen
A 12 pair pack of Level 5/A4 gloves with a touchscreen and a stated 1 year manufacturer warranty, aimed at shop bulk use.
Pros
- 12 pairs, the joint largest pack here
- Level 5/A4 cut resistance stated in the title
- Touchscreen stated for phone and device use
- 1 year manufacturer warranty stated
Cons
- Heavyweight fabric class, where the rivals list lightweight
- No care instructions stated in the listing
- Palm is coated with added grip; coating material not named
- No stated cut detail beyond the Level 5/A4 title claim

COOLJOB 12/120 Pairs Cut Resistant Work Gloves PU
12 pairs with a choice of ANSI A2 to A9, a 13/18 gauge seamless shell and PU coated palm, machine washable per the listing.
Pros
- 12 pairs, the joint largest pack here
- ANSI A2, A4, A6 and A9 options in the title
- PU coated palm on a lightweight, breathable shell
- Machine wash stated in the listing
Cons
- 1 month warranty, the shortest stated term here
- Listing marks water resistance true in a single field and not water resistant in another
- No closure at the wrist
- 4 cut levels in one title, so check the listing matches the level you want

MaxiFlex Seamless Knit Nylon Gloves with Nitrile
A nylon and spandex seamless knit glove with nitrile coat and micro foam grip, but the listing states no cut level and no concrete warranty.
Pros
- Seamless knit nylon and spandex liner, fitted type
- Nitrile coat with micro foam grip on palm and fingers
- 9 inch glove length with pull on closure
- Reusable and listed as unisex adult
Cons
- No cut level stated anywhere in the listing
- Warranty description reads only MFG Warranty, with no term
- Water resistance marked true in a single field, not water resistant in another
- Care instructions state do not wash
Other welders and gear to compare
Schwer 2 Pairs A7 Cut Resistant Work GlovesCheck price on Amazon
Schwer 12 Pairs A4/A5/A6 Cut Resistant GlovesCheck price on Amazon
Schwer 12 Pairs A5 Cut Resistant GlovesCheck price on Amazon
A3/A4/A9 Cut Resistant 2/3/6/12 Pairs Work Gloves for Men &Check price on Amazon
A4 Cut Resistant 6 Pairs Pack Work Gloves for Men & WomenCheck price on Amazon
Schwer 6 Pairs Safety Work GlovesCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Cut level | Palm coating | Fit | Pack | Warranty |
|---|---|---|---|---|---|---|
| Schwer ProGuard A9 | 9.7/10 | ANSI A9 | Sandy nitrile | 13-gauge, pull on | 1 pair | Limited lifetime |
| LOCCEF A4 12-Pack | 9.5/10 | Level 5 / A4 | Coated, added grip | Snug | 12 pairs | 1 year |
| COOLJOB 12-Pack A2-A9 | 9.5/10 | ANSI A2 to A9 | PU | Snug | 12 pairs | 1 month |
| MaxiFlex 34-874 | 9.3/10 | Not stated | Nitrile, micro foam | Fitted | 2 count | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 23 October 2026.
Buying guide: how to choose the best cut resistant gloves
Match the cut level to the work
The stated cut level is the headline figure. Schwer states ANSI A9, the highest level in this roundup, with a metal wire and HPPE liner. LOCCEF states Level 5/A4 in its title. COOLJOB lists ANSI A2, A4, A6 and A9 as options in its title, so check that the listing matches the level you want before ordering. MaxiFlex states no cut level anywhere, which is why it sits last here despite a known brand name.
Coating decides grip
Sandy nitrile on the Schwer pair is built for wet and greasy parts, per the listing. COOLJOB uses a PU coated palm on a 13/18 gauge shell, and LOCCEF describes its palm as coated with added grip. MaxiFlex uses a nitrile coat with micro foam grip on palm and fingers. Knit gauge runs 13 on the Schwer to 13/18 on the COOLJOB; both are listed as lightweight shells, while LOCCEF lists a heavyweight fabric class.
Fit and care
Fit types here are fitted, snug, classic and pull on, with wing thumbs on the MaxiFlex and COOLJOB and a reinforced thumb on the Schwer. The Schwer and COOLJOB listings state machine wash. The MaxiFlex listing states do not wash, so plan on wiping that pair down. The LOCCEF listing states no care instructions at all.
Pack size and warranty
COOLJOB and LOCCEF ship 12 pairs, which suits a shop that burns through gloves. Schwer ships 1 pair. MaxiFlex lists a unit count of 2 count with 12 items in the spec table, a mismatch the review covers. Warranty terms run from a stated 1 year manufacturer term on the LOCCEF to 1 month on the COOLJOB, a limited lifetime term on the Schwer, and a bare MFG Warranty line with no term on the MaxiFlex.
Use as directed. Cut resistant gloves guard against sharp edges during handling, not against heat, chemicals or punctures the listing does not rate. Inspect the coating before each use and retire a pair when the liner shows through. For the full safety lineup, see cut resistant gloves a4 and the rest of the welding safety gear hub.
Before You Strike an Arc
- Match the stated cut level to the task: the A9 pair for sharp sheet and plate edges, an A4 pair for general handling and fit up.
- Check the fit on arrival; a snug knit keeps the coated palm where it belongs, and a loose cuff snags on everything.
- Look the coating over for thin spots at the thumb crotch before the first shift.
- Wash only the pairs whose listings state machine wash; the MaxiFlex listing states do not wash.
FAQ for welders
What are cut resistant gloves?
They are work gloves with liners made from cut resistant fibers such as HPPE, fiberglass or metal wire, as the listings here state, plus a coated palm for grip. The coatings here are nitrile or PU depending on the listing. They are meant for handling sharp material, not for heat or chemical protection the listing does not state.
Why wear cut resistant gloves?
Welding and fab work means handling sheet metal, deburred edges and fresh cut plate, all of which slice skin fast. A cut resistant liner lowers the chance of a slice during handling and fit up. They do not replace task specific PPE such as a helmet or jacket.
Do cut resistant gloves work?
They work within their stated level: an ANSI A9 glove is listed for a higher cut hazard than an ANSI A4 glove. No glove stops every cut, and a worn coating or torn liner ends the protection. Inspect the pair before each use and retire it when damage shows.
How do you clean cut resistant gloves?
The Schwer and COOLJOB listings state machine wash. The MaxiFlex listing states do not wash, so wipe that pair down instead. The LOCCEF listing states no care instructions, so check with the maker before washing.
What is A4 cut resistant gloves?
A4 is a mid ANSI cut level; in this roundup the LOCCEF title states Level 5/A4 and COOLJOB lists A4 among its A2 to A9 options. Higher letters mean a higher stated cut hazard class. Match the level to the sharpest edge you handle.
Related: cut resistant gloves vs leather gloves, best welding gloves for fabrication, mig gloves vs tig gloves, welding safety gear checklist for beginners, and the welding safety gear hub.
Scoring, line by line
Each glove is scored on performance, build, value, safety and warranty, with the weights published on the How we pick page. Gloves with a stated cut level score on safety; a glove with no stated level earns no safety points, and the ranking comes from the other criteria. How we pick explains the weights.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Schwer ProGuard A9 | 9.7 | 30 | 21 | 20 | 8 | 4 |
| LOCCEF A4 12-Pack | 9.5 | 27 | 19 | 21 | 5 | 3 |
| COOLJOB 12-Pack A2-A9 | 9.5 | 26 | 18 | 21 | 5 | 2 |
| MaxiFlex 34-874 | 9.3 | 23 | 19 | 18 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




