Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Sanding Belt Sizes Chart for Grinders

Sanding belt sizes explained by width, length and grit, with 4 packs from 1/2 x 18 inch to 4 x 24 inch belts compared.

Sanding Belt Sizes Chart for Grinders
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 136 Pcs 1/2" x 18" Sanding Belts Set36 Pcs 1/2" x 18" Sanding Belts Set9.7/10View on Amazon
  2. 23x18 3 x 18 Inch Sanding Belt Pack 3-Inch x3x18 3 x 18 Inch Sanding Belt Pack 3-Inch x9.6/10View on Amazon
  3. 3POWERTEC 4 x 24 Inch Sanding Belts, 10 PKPOWERTEC 4 x 24 Inch Sanding Belts, 10 PK9.6/10View on Amazon
  4. 454PCS Sanding Belts and Discs Combo Kit54PCS Sanding Belts and Discs Combo Kit9.6/10View on Amazon

A belt that does not fit the sander is a belt you cannot use, and a grit that does not match the job leaves scratches or takes forever to cut. Sanding belt sizes are the width and length of the belt, and the grit on it is a separate number. This guide shows how to read those numbers off a listing, match them to your sander, and pick from the packs below.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

36 Pcs 1/2" x 18" Sanding Belts Set

36 Pcs 1/2" x 18" Sanding Belts Set

MOVIRON9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36 pack of 1/2 x 18 inch belts in grits from 80 to 5000, 4 of each, with zirconia coarse grits, alumina medium grits, silicon carbide fine grit and pyramid alumina polishing grits.

Pros

  • 36 belts in grits from 80 to 5000, 4 of each
  • Grit material stated per range: zirconia coarse, alumina medium, silicon carbide fine
  • Polishing grits at 2500 and 5000 for fine work
  • Flat, smooth joint with dual-directional tape

Cons

  • Only fits sanders that use 1/2 x 18 inch belts
  • No warranty term is stated
  • 36 belts of one size only; no other belt size in the pack
  • No compatible sander models are named, only the belt size
3x18 3 x 18 Inch Sanding Belt Pack 3-Inch x

3x18 3 x 18 Inch Sanding Belt Pack 3-Inch x

TPmax9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12 pack of 3 x 18 inch aluminum oxide belts, 4 each of 80, 120 and 150 grits, with a diagonal lap splice and a washable, antistatic coating that resists loading.

Pros

  • 12 belts in 80, 120 and 150 grits, 4 of each
  • Aluminum oxide grain for wood, aluminum, non-ferrous metal, glass, plastic and stone
  • Diagonal lap splice with a firm interface that will not break easily
  • Antistatic and washable, with an additive in the resin to resist loading

Cons

  • Only 80, 120 and 150 grits; no finer grits in the pack
  • No weight or warranty term is stated
  • No compatible sander models are named
  • Only one belt size in the pack
POWERTEC 4 x 24 Inch Sanding Belts, 10 PK

POWERTEC 4 x 24 Inch Sanding Belts, 10 PK

POWERTEC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 4 x 24 inch aluminum oxide belts in 120 grit, with an X-Weight cloth backing and a resin on resin bond, listed for WEN, Makita, Ridgid and Triton sanders.

Pros

  • 10 belts in 120 grit for consistent work
  • X-Weight cloth backing with an open coat aluminum oxide grain
  • Heat and moisture resistant, with seams that will not break under pressure
  • Compatible machines named: WEN 6524, Makita 9403 and 9404, Ridgid EB4424, Triton T41200BS

Cons

  • Only 120 grit in this pack
  • No warranty term is stated
  • 10 belts, the smallest pack here
  • No finer grits for polishing in this pack
54PCS Sanding Belts and Discs Combo Kit

54PCS Sanding Belts and Discs Combo Kit

makiwork9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 54 piece combo kit with 18 belts for 1 x 30 sanders and 36 discs for 5 inch disc sanders, in assorted grits, with aluminum oxide abrasive and a heat resistant backing.

Pros

  • 54 pieces: 18 belts and 36 discs in one kit
  • Fits most standard 1 x 30 belt sanders and 5 inch disc sanders
  • Aluminum oxide abrasive with a heat resistant backing
  • Listed for woodworking, metalworking, auto refinishing and rust removal

Cons

  • Grit levels are called assorted, with no grit numbers stated
  • No warranty term is stated
  • No grit list for the belts apart from the discs
  • Only 18 belts; the rest of the 54 pieces are discs

Sanding belt sizes in one paragraph

A sanding belt size is its width by its length, in inches. The grit printed on the listing is a separate number from the size. The packs in this guide run from 1/2 x 18 inch belts for narrow air and electric sanders to 4 x 24 inch belts, with a 1 x 30 inch belt and disc combo and a 3 x 18 inch pack between them. Match the width and length to your sander first, then pick the grit for the job.

Side by side

Factor TPmax 3 x 18 makiwork Combo 54 MOVIRON 1/2 x 18 POWERTEC 4 x 24
Belt size 3 x 18 in 1 x 30 in belts, 5 in discs 1/2 x 18 in 4 x 24 in
Pack 12 belts 18 belts, 36 discs 36 belts 10 belts
Grits in the pack 80, 120, 150 Assorted, not listed 80 to 5000 120
Abrasive Aluminum oxide Aluminum oxide Zirconia, alumina, silicon carbide, pyramid alumina Aluminum oxide
Listed for Wood, aluminum, non-ferrous metal, glass, plastic, stone Woodworking, metalworking, auto refinishing, rust removal Metal, wood, fiberglass, rubber, plastic, stone Wood, aluminum, fiberglass, rubber, plastic, non-ferrous metals

The table lines up the packs by size, pack count, grits and abrasive.

How to match a belt to your sander

Read the size off your sander or its manual, then match the width and length exactly. The POWERTEC listing names the machines its 4 x 24 inch belts fit, and the makiwork listing states its belts fit most standard 1 x 30 belt sanders and 5 inch disc sanders. When the listing names no machine, match the size alone.

A belt sander runs an abrasive belt at speed: wear eye and face protection, keep the guards in place, clamp the work, and keep gloves away from rotating parts. OSHA machine guarding rules cover guards on machines like this, so check the guard before the first pass.

Grits: what the packs cover

Grit runs from coarse to fine, and the packs here cover different slices of that range. The TPmax pack holds 80, 120 and 150 grits. The MOVIRON pack runs from 80 to 5000 grits, with zirconia on the coarse grits, alumina on the medium grits, silicon carbide at 1000 grit and pyramid alumina at 2500 and 5000 grits for polishing. The POWERTEC pack is 120 grit only, and the makiwork kit (on Amazon) lists its grits as assorted with no grit numbers stated.

The belts: 4 packs in 4 sizes

The size and grit steps above are where the pack matters, so the 4 packs below are ranked by how clearly each listing states its size, grits and abrasive.

FAQ for welders

What sanding belt size do I need?

Match the width and length your sander takes. The packs here cover 1/2 x 18 inch, 1 x 30 inch, 3 x 18 inch and 4 x 24 inch belts, plus 5 inch discs in the makiwork combo. If your sander takes a size outside that list, none of these packs fit it.

What grit should I start with?

Start with the coarsest grit the job needs, then move finer. The TPmax pack starts at 80 grit, the MOVIRON pack runs to 5000 grit, and the POWERTEC pack is 120 grit only. The makiwork kit does not state its grits.

Can I use a sanding belt on metal?

The listings here say yes for the materials they name. The TPmax pack lists aluminum and non-ferrous metal, the makiwork kit lists metalworking and rust removal, the MOVIRON pack lists metal polishing and welding spot grinding, and the POWERTEC pack lists aluminum and non-ferrous metals.

Do sanding belts fit any sander?

No. A belt fits the sander that takes its exact width and length. The POWERTEC listing names WEN, Makita, Ridgid and Triton machines, and the makiwork listing states most standard 1 x 30 belt sanders. Check the size before you buy.

Related: the best sanding belt 1 x 30, best 1/2 x 18 inch sanding belts and ceramic vs zirconia sanding belt guides, and the metal fab tools hub. Also see our sanding belt vs sanding disc guide.

More buying guides

Metal Fab Tools ·

Best Sanding Belt for Metal (2026)

5 zirconia and aluminum oxide sanding belts for metal, compared on belt size, grit range, pack size and the metals each listing states.