Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Rolling Flaring Tool (2026): 5 Picks for Copper and Brake Lines

Five rolling flaring tools for copper, brass and brake lines, compared on flare types, sizes, build and the warranty each listing states.

Best Rolling Flaring Tool (2026): 5 Picks for Copper and Brake Lines
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TUBPRO Double Flare KitBest OverallTUBPRO Double Flare Kit9.7/10View on Amazon
  2. 2Super Stars 5-in-1 HVAC KitBest HVAC KitSuper Stars 5-in-1 HVAC Kit9.7/10View on Amazon
  3. 3SEEKSELF 37 and 45 Degree KitMost Flare TypesSEEKSELF 37 and 45 Degree Kit9.6/10View on Amazon
  4. 4Super Stars Eccentric Flare ToolBest Eccentric ConeSuper Stars Eccentric Flare Tool9.6/10View on Amazon

A copper line that ends in a ragged flare will weep at the fitting, and a brake line with a cracked flare is a job done twice. The best rolling flaring tool turns the tube mouth into a clean, even flare. This guide compares the kits on what each listing states: flare types and angles, sizes, build, kit contents and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall TUBPRO Double Flare Kit: Double and single flares in five sizes, a tube cutter, five adapters and a case, with a 1 year warranty stated. Check price on Amazon
  • Best HVAC Kit Super Stars 5-in-1 HVAC Kit: Inch and metric clamps from 1/4 to 3/4 inch, a cutter and deburr tool in the kit, and a 1 year warranty stated. Check price on Amazon
  • Most Flare Types SEEKSELF 37 and 45 Degree Kit: Single, double and bubble flares at 37 and 45 degrees in four sizes, with split dies and a vise mounted body. Check price on Amazon
  • Best Eccentric Cone Super Stars Eccentric Flare Tool: A 45 degree single flare eccentric cone tool for sizes from 1/4 to 3/4 inch, with a 1 year warranty stated. Check price on Amazon

The best rolling flaring tool picks

Brake Line Flaring Tool Kit, 3/16", 1/4", 5/16"

Brake Line Flaring Tool Kit, 3/16", 1/4", 5/16"

TUBPRO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A brake line kit that makes 45 degree double and single flares in five sizes, with a tube cutter, five adapters and a blow molded case.

Pros

  • Makes both double and single 45 degree flares in five sizes from 3/16 to 1/2 inch
  • Includes a tube cutter for 1/8 to 5/8 inch pipe, five adapters and a blow molded case
  • Heat treated steel flaring bar and forged yoke, with an alloy steel chrome swivel
  • A 1 year warranty is stated in the listing

Cons

  • Not for hard material like steel or iron, per the listing
  • Covers five sizes only, with no 37 degree flare option
  • No bubble flare option is stated
  • The cutter range and the adapter sizes differ, so check the pipe size before cutting
Super Stars Flaring Tool Kit 1/4in

Super Stars Flaring Tool Kit 1/4in

Super Stars9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 in 1 HVAC kit with inch and metric clamps, a pipe cutter and a deburr tool, for 45 degree single flares in soft copper, brass, aluminum and mild steel tubing.

Pros

  • Inch and metric clamps cover 1/4 to 3/4 inch and 6 to 19 mm
  • Includes a pipe cutter and a deburr tool with the flaring tool
  • Eccentric cone type with a large feed screw handle for smooth turning
  • A 1 year manufacturer warranty is stated

Cons

  • Single flare only, with no double or bubble flare option
  • Recommended for soft copper, brass, aluminum and mild steel tubing only
  • No 37 degree flare option is stated
  • No bubble flare option is stated
Super Stars Flaring Tools for 1/4in

Super Stars Flaring Tools for 1/4in

Super Stars9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 45 degree single flare eccentric cone tool for 1/4 to 3/4 inch soft copper, brass, aluminum and mild steel tubing, with a location steel bar for placing the tube.

Pros

  • Covers 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 inch sizes
  • Eccentric cone with a large feed screw handle for smooth turning
  • Location steel bar and location holes help place the tube before flaring
  • A 1 year manufacturer warranty is stated

Cons

  • Tool only, with no cutter or deburr tool in the listing
  • Single flare only, with no double or bubble flare option
  • Recommended for soft copper, brass, aluminum and mild steel tubing only
  • No 37 degree flare option is stated
DPTOOL Brake Line Flaring Tool Kit 3/16" 1/4" SAE

DPTOOL Brake Line Flaring Tool Kit 3/16" 1/4" SAE

DPTOOL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A brake line kit for 45 degree single, double and bubble flares in 3/16 and 1/4 inch copper, aluminum and nickel copper tubing, with OP1 punches and a portable case.

Pros

  • Makes single, double and bubble flares at 45 degrees
  • Includes double ended OP1 punches, mold lubricant, a hex wrench and a portable case
  • Positioning bolt and locking screws hold the tubing flush while flaring
  • A 12 months warranty is stated

Cons

  • Covers 3/16 and 1/4 inch tubing only
  • Tube cutter is not included in the set
  • Not suitable for stainless steel tube, per the listing
  • No 37 degree flare option is stated
SEEKSELF Professional Brake Line Flaring Tool Kit

SEEKSELF Professional Brake Line Flaring Tool Kit

SEEKSELF9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A vise mounted brake line kit for 37 and 45 degree single, double and bubble flares in 3/16 to 3/8 inch steel and copper tubing, with split dies and a long lever handle.

Pros

  • Makes 37 and 45 degree single, double and bubble flares
  • Four sets of 45 degree split dies and four sets of 37 degree split dies
  • Split dies have a limiting hole to stop them slipping
  • Long lever handle turns to the left for right handed use with less effort

Cons

  • No warranty term is stated in the listing
  • The tool body must be clamped in a vise before use
  • Not suitable for use under a car, per the listing
  • A paper graphic instruction manual is the only guide included

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Flare types Sizes Flare angle Kit includes Warranty
TUBPRO Double Flare Kit 9.7/10 Single, double 3/16 to 1/2 in 45 degrees Cutter, 5 adapters, case 1 year
Super Stars 5-in-1 HVAC Kit 9.7/10 Single 1/4 to 3/4 in 45 degrees Cutter, deburr, 2 clamps 1 year
Super Stars Eccentric Flare Tool 9.6/10 Single 1/4 to 3/4 in 45 degrees Tool only 1 year
DPTOOL Double Flare Kit 9.6/10 Single, double, bubble 3/16, 1/4 in 45 degrees Punches, lubricant, case 12 months
SEEKSELF 37 and 45 Degree Kit 9.6/10 Single, double, bubble 3/16 to 3/8 in 37, 45 degrees Split dies, lever, case None stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026.

Buying guide: what matters in a flaring kit

Flare angle and type

Every kit here makes 45 degree flares, and only the SEEKSELF kit also makes 37 degree flares. The TUBPRO kit makes single and double flares, while the SEEKSELF and DPTOOL kits also state bubble flares. The two Super Stars tools make single flares only.

Sizes

The Super Stars tools cover 1/4 to 3/4 inch, the widest range here. The TUBPRO kit covers 3/16 to 1/2 inch, the SEEKSELF kit 3/16 to 3/8 inch, and the DPTOOL kit 3/16 and 1/4 inch only. For a copper tubing flaring tool, match the kit to the tubing you flare most, and check the metric sizes where the listing states them.

Eccentric cone vs die blocks

The Super Stars tools use an eccentric cone with a large feed screw handle and a location steel bar. The SEEKSELF kit uses split dies in a vise mounted body, with a long lever handle. The TUBPRO kit uses a flaring cone and a flaring bar, while the DPTOOL kit uses double ended OP1 punches.

Kit contents

The TUBPRO kit includes a tube cutter, five adapters and a case, and the Super Stars 5 in 1 kit includes a cutter and a deburr tool. The DPTOOL kit states the tube cutter is not included, and the Super Stars tool is sold as the tool alone, so check the kit contents before you buy.

Warranty

Four kits here state a warranty: the two Super Stars tools and the TUBPRO kit state 1 year, and the DPTOOL kit states 12 months. The SEEKSELF kit states no warranty term. A stated term is part of the score, so a kit with no stated warranty ranks lower even when its flare range is wider.

Use as directed. Wear eye protection and gloves when flaring, as the SEEKSELF listing states, and keep hands clear of the cone and dies while turning the handle. Clamp a vise mounted tool firmly before use, and check each flare before fitting the line. See the OSHA welding overview for general shop safety guidance.

Before You Strike an Arc

  • Clamp the SEEKSELF body in a vise before turning the handle.
  • Cut the tube and deburr the end before flaring; the Super Stars 5 in 1 kit includes a cutter and deburr tool, while the DPTOOL kit states the cutter is not included.
  • Match the die or adapter to the tube size: the kits here cover 3/16 to 3/4 inch between them.
  • Lubricate the punch before use, as the DPTOOL listing states, and wear goggles and gloves, as the SEEKSELF listing states.
  • Check the flare angle on the turntable or die: 45 degrees here, with 37 degrees also stated on the SEEKSELF kit.

FAQ for welders

What does a rolling flaring tool do?

A rolling flaring tool shapes the end of a tube into a flare that seals against a fitting. The eccentric cone type turns around the tube mouth as the handle turns. The Super Stars tools here use that design, while the other kits use a cone and yoke, split dies or punches.

Can I use a 45 degree flaring tool for brake lines?

Yes, where the listing states it. The TUBPRO, SEEKSELF and DPTOOL kits here state 45 degree flares for brake lines, in copper, aluminum and steel tubing. Check the flare type your fitting needs, since the kits here make single, double and bubble flares in different combinations.

What is the difference between a single flare and a double flare?

A single flare folds the tube end out once, while a double flare folds it twice for a stronger seal on brake lines. The TUBPRO kit makes single and double flares, and the SEEKSELF and DPTOOL kits also make bubble flares. The two Super Stars tools make single flares only.

Do I need a tube cutter with a flaring kit?

The tube must be cut before flaring, so a cutter matters. The TUBPRO kit includes a tube cutter, and the Super Stars 5 in 1 kit includes a cutter and a deburr tool. The DPTOOL kit states the tube cutter is not included, and the Super Stars tool is sold as the tool alone.

Can these tools flare stainless steel tubing?

It depends on the kit. The SEEKSELF kit states it can flare stainless steel, steel and soft metal tubing like copper. The DPTOOL kit states it is not suitable for stainless steel tube, and the TUBPRO kit states it is not for hard material like steel or iron.

Related: rolling type flaring tool, best tube bender for copper pipe, best tube cutter set, tube bender for brake lines, best brazing flux for copper pipe, best copper deburring tool, tubing notcher vs tubing cutter, best tube bender for aluminum tubing.

Scoring, line by line

Each tool is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Flaring tools state no electrical safety listing, so every tool here scores zero there.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TUBPRO Double Flare Kit 9.7 30 21 21 n/a 2
Super Stars 5-in-1 HVAC Kit 9.7 30 20 21 n/a 2
Super Stars Eccentric Flare Tool 9.6 29 20 20 n/a 2
DPTOOL Double Flare Kit 9.6 28 20 20 n/a 2
SEEKSELF 37 and 45 Degree Kit 9.6 32 21 21 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides