Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Quick Change Disc Type R (2026)

Four Type R quick change discs compared by grit, count, abrasive and fit, from a 300-piece set to a 25-pack.

Best Quick Change Disc Type R (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Linkiblock 300-Pc SetBest OverallLinkiblock 300-Pc Set9.6/10View on Amazon
  2. 2Linkiblock 45-Pc SetBest Multi-Grade SetLinkiblock 45-Pc Set9.6/10View on Amazon
  3. 3FPPO 3in 50-PcBest 3-Inch DiscFPPO 3in 50-Pc9.4/10View on Amazon

A weld bead needs blending, a gasket face needs cleaning, or a rusted patch needs bare metal before paint, and the disc on the die grinder decides how fast that work goes. Swapping discs without tools keeps the job moving from coarse removal to fine finish. This guide compares picks for the search best quick change disc type r, looking at grit, count, abrasive and backing pad fit.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Linkiblock 300-Pc Set: 300 discs in 5 grits with 2 mandrels and 2 pad holders. Check price on Amazon
  • Best Multi-Grade Set Linkiblock 45-Pc Set: 45 discs in coarse, medium and fine with adapter and backing pad. Check price on Amazon
  • Best 3-Inch Disc FPPO 3in 50-Pc: 50 discs at 3 inch, grit 40, with roll lock R-type fit. Check price on Amazon

The machines

300Pcs 2 inch R-Type Quick Change Aluminum Oxide

300Pcs 2 inch R-Type Quick Change Aluminum Oxide

Linkiblock9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 300-piece set of 2 inch R-type surface conditioning discs in 36, 60, 80, 120 and 240 grit, with 2 mandrels and 2 pad holders.

Pros

  • 300 discs in 5 grits, 60 of each, from removal to finish
  • Aluminum oxide with heat and load-resistant coating
  • 2 mandrels and 2 pad holders included
  • Universal male Type-R connection for twist-on and twist-off use

Cons

  • No max RPM is stated on this listing
  • No warranty term is stated on this listing
  • No single grit pack option is described
  • Maker claim of exceeding ANSI and EU standards names no specific standard
45Pcs 2 inch Nylon Surface Conditioning Quick

45Pcs 2 inch Nylon Surface Conditioning Quick

Linkiblock9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 45-piece set of 2 inch nylon R-type surface conditioning discs in coarse, medium and fine, with an adapter and backing pad.

Pros

  • 45 discs in 3 grades: brown coarse, maroon medium, blue fine
  • Adapter and backing pad included
  • Nylon discs for steel, stainless steel, alloys, plastics and fiberglass
  • Universal male Type-R connection for twist-on and twist-off use

Cons

  • No grit numbers are stated, only coarse, medium and fine
  • No max RPM is stated on this listing
  • No warranty term is stated on this listing
  • Maker claim of exceeding ANSI and EU standards names no specific standard
FPPO Aluminum Oxide Grit 40 50Pcs 3 Inch Sanding

FPPO Aluminum Oxide Grit 40 50Pcs 3 Inch Sanding

FPPO9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50-piece set of 3 inch R-type sanding discs in grit 40 aluminum oxide, with a roll lock R-type system for power-operated sanders.

Pros

  • 50 discs at 3 inch, larger than the 2 inch picks
  • Grit 40 aluminum oxide for coarse polishing
  • Roll lock R-type system with torque spiral mechanism
  • High density abrasive for cutting capacity

Cons

  • No backing pad is stated on this listing
  • No max RPM is stated on this listing
  • No warranty term is stated on this listing
  • Only one grit, 40, in the box
Sungold Abrasives 74901 Very-Fine Non Woven

Sungold Abrasives 74901 Very-Fine Non Woven

SUN GOLD9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-pack of 2 inch very fine blue non-woven R-type surface conditioning discs for gasket material, oxidation and rust on all metals.

Pros

  • Very fine non-woven discs for cleaning and finishing
  • 25 discs in the box
  • Removes gasket material, oxidation and rust
  • For cleaning and finishing on all metals

Cons

  • No backing pad included; listing advises the 99081 pad
  • No max RPM is stated on this listing
  • No warranty term is stated on this listing
  • Listing spells holder fit and disc line names two ways

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Size Grit Count Pad included
Linkiblock 300-Pc Set 9.6/10 2 in 36 to 240 300 2 holders
Linkiblock 45-Pc Set 9.6/10 2 in Coarse, medium, fine 45 Yes
FPPO 3in 50-Pc 9.4/10 3 in 40 50 Not stated
Sungold 2in 25-Pack 9.4/10 2 in Very fine 25 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 29 October 2026. All four picks are discs.

Buying guide: best quick change disc type r

Grit: from coarse removal to fine finish

Grit decides how much material comes off and how smooth the finish is. The Linkiblock 300-piece set covers five grits, 36, 60, 80, 120 and 240, with 60 discs of each, so one kit runs from aggressive removal to fine finishing. The FPPO discs are grit 40 for coarse polishing, the Linkiblock 45-piece set runs coarse, medium and fine, and the Sungold discs are very fine non-woven for cleaning and finishing. Match the grit to the step: coarse grades for stock removal and rust, fine grades for blending and finish.

Size: 2 inch or 3 inch

Three picks are 2 inch discs and one, the FPPO, is 3 inch. Size must match the backing pad and holder: the Linkiblock kits include pad holders sized for their 2 inch discs. The Sungold discs fit 3M Roloc holders, per the listing. A 3 inch disc on a 2 inch pad, or the reverse, is a mismatch, so check size before ordering.

Backing pads are mandatory

A quick change disc mounts on a backing pad. Both Linkiblock kits include holders: 2 mandrels and 2 pad holders in the 300-piece set, and an adapter with backing pad in the 45-piece set. The Sungold listing advises its 99081 pad for best results, while the FPPO listing states no pad at all. If the kit has no pad, buy one with it.

Abrasive material

Abrasive material shapes cut and life. The Linkiblock 300-piece set and the FPPO discs use aluminum oxide, with the Linkiblock set adding a heat and load-resistant coating. The Sungold discs are non-woven surface conditioning discs for gasket material, oxidation and rust on all metals. The Linkiblock 45-piece set uses nylon surface conditioning discs in brown coarse, maroon medium and blue fine. Aluminum oxide suits aggressive work, while non-woven and nylon discs suit cleaning and blending.

Max RPM and safe use

No disc listing here states a max RPM, so check the backing pad and holder used with the discs for its stated limit before running them. The Linkiblock listings claim their materials exceed ANSI and EU standards for performance and safety, but they name no specific standard, so that claim is reported as the maker states it, not as a named standard.

Before You Strike an Arc

  • Fit the disc to a backing pad before switching on.
  • Match disc size to pad: 2 inch discs pair with a 2 inch pad, and the FPPO 3 inch discs need a 3 inch pad.
  • Check holder fit: the Sungold discs fit 3M Roloc holders, and the Linkiblock discs use a universal male Type-R connection.
  • Check the stated limit on the pad and holder before running the discs.
  • Check the grit before starting: coarse grades remove stock and rust, fine grades blend and finish.

FAQ for welders

What is a Type R quick change disc?

A small abrasive disc with a male Type-R connection that twists on and off a backing pad. The Linkiblock listings describe twist-on and twist-off operation, and the FPPO discs use a roll lock R-type system with a torque spiral mechanism that lets the disc twist off and on. The point is fast swaps: change grits without tools and keep working.

Do quick change discs need a backing pad?

Yes. Both Linkiblock kits include holders, and the Sungold listing advises its 99081 pad for best results. Only the FPPO listing states no pad, so pair those discs with a pad before use.

What grit should I start with?

Match grit to the job. For aggressive removal and rust, start coarse: grit 36 in the Linkiblock 300-piece set or grit 40 on the FPPO discs. For blending and finish, move to fine grades: grit 240 in the Linkiblock set, the fine blue discs in the 45-piece set, or the very fine Sungold discs. Work through the grits rather than jumping from coarse to fine.

Will 2 inch discs fit my die grinder?

They fit where the holder and pad match. The Linkiblock discs fit die grinders, air grinders, drills and rotary tools. Check that the pad size matches the disc size before ordering.

What is the difference between the two Linkiblock sets?

Count and grit range. The 300-piece set holds 300 discs in five grits, 36, 60, 80, 120 and 240, with 60 of each, plus 2 mandrels and 2 pad holders. The 45-piece set holds 45 discs in three grades, brown coarse, maroon medium and blue fine, with 15 of each, plus an adapter and backing pad. The larger set suits a shop that burns through discs, while the smaller set suits a single project run from removal to finish.

Scoring, line by line

Each pick is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a warranty term, so warranty adds nothing to any score here.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Linkiblock 300-Pc Set 9.6 32 22 22 4 0
Linkiblock 45-Pc Set 9.6 29 21 21 4 0
FPPO 3in 50-Pc 9.4 28 20 21 0 0
Sungold 2in 25-Pack 9.4 28 21 19 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More welding guides

Related: best bristle disc for grinder, best abrasive pads for metal, the metal fab tools hub, and sanding belt vs sanding disc.

More buying guides