Best 2 Inch 36 Grit Ceramic Quick Change Disc (2026)
Five 2 inch quick change discs compared by grain, grit, pack size and attachment, from a 25-count ceramic set to a 150-piece aluminum oxide kit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBenchmark Ceramic 369.6/10View on Amazon - 2
Best Value PackLinkiblock 150-Pc Set9.5/10View on Amazon - 3
Best for Weld Blending3M Cubitron 3 36+9.5/10View on Amazon - 4
Best Mixed SetShawya 60-Pc Mixed Set9.4/10View on Amazon - 5
Best Mixed GritTshya 60-Pc Mixed Grit9.4/10View on Amazon
A weld bead cools, the slag comes off, and the joint still needs blending into the metal around it. The best 2 inch 36 grit ceramic quick change disc takes that bead down fast, without loading up or burning the steel beside it. This roundup compares the sets by grain, grit, pack size and attachment, using only what each listing publishes.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Benchmark Ceramic 36: Ceramic 36 grit in a 25-count R-Type set for deburring, rust removal and paint stripping. Check price on Amazon
- Best Value Pack Linkiblock 150-Pc Set: 150 aluminum oxide discs with 2 mandrels and a pad holder. Check price on Amazon
- Best for Weld Blending 3M Cubitron 3 36+: Precision shaped ceramic grain for grinding and weld blending at a high cut rate. Check price on Amazon
- Best Mixed Set Shawya 60-Pc Mixed Set: 60 pieces across ceramic, zirconia and surface conditioning discs with a shank holder. Check price on Amazon
- Best Mixed Grit Tshya 60-Pc Mixed Grit: 60 discs in 36, 60 and 80 grit for surface prep, rated to 23000 RPM. Check price on Amazon
The machines

Benchmark Abrasives 2" Quick Change Sanding Discs
A 25-count set of 2 in ceramic quick change discs in 36 grit, with male R-Type twist-on fastening for deburring, rust removal and paint stripping on metal.
Pros
- Sharp ceramic grains for stock removal and deburring
- Male R-Type twist-on fastening for quick attachment
- Fits 2 in die grinders, pneumatic grinders and drills
- Listing states materials exceed ANSI and EU standards
Cons
- 25 discs, the smallest ceramic-only count here
- No warranty term is stated
- No max RPM stated in the listing
- Ceramic only; no mixed grits in the set

150Pcs 2 inch R-Type Quick Change Aluminum Oxide
A 150-piece set of 2 in aluminum oxide surface conditioning discs in 36 grit, with 2 mandrels and a pad holder for fast setup on die grinders.
Pros
- 150 discs with 2 mandrels and 1 pad holder
- Aluminum oxide with a heat and load-resistant coating
- Universal male Type-R connection for twist-on and twist-off
- Listing states materials exceed ANSI and EU standards
Cons
- Aluminum oxide, not ceramic, despite the ceramic keyword
- No warranty term is stated
- No max RPM stated in the listing
- Surface conditioning design, a lighter cut than a grinding disc

3M Cubitron 3 Roloc Fibre Disc, 33489, 36+, 2
A 15-pack of 2 in 3M Cubitron 3 Roloc fibre discs in 36+ grit, with precision shaped ceramic grain for grinding, weld blending and deburring.
Pros
- Precision shaped ceramic grain cuts faster and lasts longer, per the listing
- Curved sides reduce heat and keep the cut rate high
- Roloc system for efficient and secure disc changeouts
- Made for grinding, weld blending and deburring
Cons
- Only 15 discs in the pack
- Limited warranty stated with no term
- Marked for industrial and occupational use only, not for consumer sale or use
- No max RPM stated in the listing

Shawya 60PCS 2 Inch Sanding Disc Quick Change Disc
A 60-piece mixed quick change set with ceramic, zirconia, nylon silicon carbide and flap discs, plus a 1/4 in shank holder, with zirconia grits from 36 to 80.
Pros
- 60 pieces across ceramic, zirconia and conditioning discs
- Includes a 1/4 in shank holder
- Grits from 36 to 80 for many jobs
- Flap discs with zirconia corundum for heavy-duty work
Cons
- Only 20 of the 60 pieces are ceramic discs
- No warranty term is stated
- No max RPM stated in the listing
- Grit range stated for the zirconia discs, not per disc type

Tshya Quick Change Twist on Disc
A 60-piece set of 2 in aluminum oxide quick change discs in mixed 36, 60 and 80 grit, with a twist-on shank base and a 23000 max RPM rating.
Pros
- Three grits in one pack: 36, 60 and 80
- Twist-on shank base locks with one turn
- Rated to 23000 max RPM, per the listing
- Fits air or electric drills, die grinders and rotary tools
Cons
- Only 20 of the 60 pieces are 36 grit
- Aluminum oxide, not ceramic
- No warranty term is stated
- No mandrel or backing pad stated as included
Other welders and gear to compare
Tshya Quick Change Grinding DiscCheck price on Amazon
ElaraBerry 15 Pack 2 Inch Ceramic Sanding DiscsCheck price on Amazon
50 Pcs 2 Inch Flap DiscsCheck price on Amazon
Benchmark Abrasives 3 Inch Sanding Discs Quick Change CeramicCheck price on Amazon
HOMO FABER 50Pcs Die Grinder Sanding DiscsCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Grain | Grit | Pack | Attachment | Use |
|---|---|---|---|---|---|---|
| Benchmark Ceramic 36 | 9.6/10 | Ceramic | 36 | 25 | Male R-Type | Deburring, rust removal |
| Linkiblock 150-Pc Set | 9.5/10 | Aluminum oxide | 36 | 150 | Male Type-R | Deburring, rust removal |
| 3M Cubitron 3 36+ | 9.5/10 | Precision ceramic | 36+ | 15 | Roloc | Grinding, weld blending |
| Shawya 60-Pc Mixed Set | 9.4/10 | Mixed | 36/60/80/120 | 60 | Twist lock | Surface prep |
| Tshya 60-Pc Mixed Grit | 9.4/10 | Aluminum oxide | 36/60/80 | 60 | Twist-on | Surface prep |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 10 November 2026. Only two listings here name a safety standard, so most sets score zero for safety, and only one listing states a warranty, with no term, so every set scores zero for warranty.
Buying guide: the best 2 inch 36 grit ceramic quick change disc
Ceramic or aluminum oxide
Grain is the first split in this roundup. The Benchmark and 3M discs are ceramic, which is what the keyword asks for. The Linkiblock and Tshya discs are aluminum oxide. The Shawya set is mixed, with ceramic, zirconia and nylon silicon carbide discs in one box. Ceramic suits heavy stock removal and weld blending, while aluminum oxide covers general deburring and surface prep.
36 grit only, or mixed grit
Three sets here are single grit: the Benchmark, Linkiblock and 3M discs are 36 grit, with the 3M graded 36+. The Tshya set mixes 36, 60 and 80 grit, with 20 pieces of each, and the Shawya set mixes disc types with zirconia grits from 36 to 80. A single-grit pack suits one job done over and over, while a mixed pack suits a bench that does a little of everything.
R-Type, Roloc or twist-on
Quick change means a twist fitting, not a nut and washer. The Benchmark set uses a male R-Type twist-on fastening system, and the Linkiblock set uses a universal male Type-R connection for twist-on and twist-off. The 3M disc uses the 3M Roloc system. The Tshya disc locks onto the mandrel with one simple turn, and the Shawya set uses a twist lock shank base. Check the mandrel and backing pad too: the Linkiblock set includes 2 mandrels and 1 pad holder, and the Shawya set includes a 1/4 in shank holder.
Pack size
Counts run from a 15-pack to a 150-piece set. The 3M pack holds 15 discs, the Benchmark set holds 25, the Tshya and Shawya sets hold 60 each, and the Linkiblock set holds 150. Match the count to how fast the shop burns through discs: a single-grit ceramic pack for steady work, a big aluminum oxide set for volume.
Max RPM and tool fit
Only one listing here states a max RPM: the Tshya set is rated to 23000 max RPM. The other listings state no max RPM, so check the tool and the disc before running them. For fit, the listings name 2 in die grinders, pneumatic grinders, drills and rotary tools, and the Benchmark listing names Milwaukee, Makita, Bosch, Metabo, Ryobi, Black and Decker, Kobalt, Craftsman, Porter Cable and Neiko.
Before You Strike an Arc
- Check the disc diameter and fastening type against the die grinder before ordering: these discs are 2 in with male R-Type or Roloc-style twist-on fitting.
- Fit the mandrel and backing pad the set includes: the Linkiblock set includes 2 mandrels and 1 pad holder, and the Shawya set includes a 1/4 in shank holder.
- Note the 3M listing is marked for industrial and occupational use only, not for consumer sale or use.
- Keep each disc to the work its listing names: deburring, rust removal, paint stripping, grinding and weld blending.
FAQ for welders
How does quick change work?
By a twist fitting on the back of the disc. The Benchmark set uses a male R-Type twist-on fastening system, the Linkiblock set uses a universal male Type-R connection for twist-on and twist-off, and the 3M disc uses the 3M Roloc system, which the listing says allows efficient and secure disc changeouts.
How do you change a quick change disc?
Twist the worn disc off the mandrel and twist the new one on. The Tshya listing says one simple turn locks the disc onto the mandrel. Check that the mandrel and backing pad match the disc type before fitting a new one.
When should you change a cutting disc?
The listings state no wear limit. The 3M listing says its re-engineered grain shape lowers the need for frequent disc changeouts, and the Linkiblock listing describes a heat and load-resistant coating for extended life. Change the disc when it stops cutting and starts glazing over the work.
Are these discs ceramic or aluminum oxide?
Both, depending on the set. The Benchmark and 3M discs are ceramic. The Linkiblock and Tshya discs are aluminum oxide. The Shawya set is mixed, with ceramic, zirconia and nylon silicon carbide discs in one box.
What tools do these discs fit?
Two-inch die grinders, pneumatic grinders, drills and rotary tools, per the listings. The Benchmark listing names Milwaukee, Makita, Bosch, Metabo, Ryobi, Black and Decker, Kobalt, Craftsman, Porter Cable and Neiko, and says the discs fit virtually all other brands as well.
Related: quick change disc vs flap disc, the best grinding discs for metal, the best flap disc grit 80 and the angle grinder uses. Also see our metal fab tools hub.
Scoring, line by line
Each disc set is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Benchmark Ceramic 36 | 9.6 | 30 | 21 | 21 | 3 | 0 |
| Linkiblock 150-Pc Set | 9.5 | 28 | 20 | 22 | 3 | 0 |
| 3M Cubitron 3 36+ | 9.5 | 33 | 22 | 20 | 0 | 0 |
| Shawya 60-Pc Mixed Set | 9.4 | 26 | 19 | 21 | 0 | 0 |
| Tshya 60-Pc Mixed Grit | 9.4 | 26 | 19 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




