Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Grinding Disc for Metal (2026): 4 Picks for the Shop

Four grinding discs for metal compared on type, size, grit, max RPM and pack size, plus which disc fits weld cleanup, blending and tight spots.

Best Grinding Disc for Metal (2026): 4 Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BHA Type 27 DiscBest OverallBHA Type 27 Disc9.5/10View on Amazon
  2. 2Merryland 80 Grit Flap DiscBest CertifiedMerryland 80 Grit Flap Disc9.5/10View on Amazon
  3. 3Panlen Ceramic DiscBest CeramicPanlen Ceramic Disc9.5/10View on Amazon
  4. 4NuoDunco 2 In Mini WheelBest MiniNuoDunco 2 In Mini Wheel9.3/10View on Amazon

A bead sits high on a joint, or a cut edge needs to go flat before the next pass. The grinder comes out, and the disc on it decides how fast the metal moves and how clean the finish lands. This roundup covers the best grinding disc for metal, with discs compared on type, size, grit, max RPM and pack size.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall BHA Type 27 Disc: Type 27 depressed center disc, 24 grit aluminum oxide, fiberglass reinforced, rated 13,300 RPM Check price on Amazon
  • Best Certified Merryland 80 Grit Flap Disc: 80 grit zirconium flap disc, EN 13743 and MPA Certified, 20 pack Check price on Amazon
  • Best Ceramic Panlen Ceramic Disc: Ceramic grains, T29 convex shape, 15 to 25 degree working angle, 10 pack Check price on Amazon
  • Best Mini NuoDunco 2 In Mini Wheel: 2 in wheel for die grinders and tight places, 20,000 RPM, 10 pack Check price on Amazon

The machines

BHA 4-1/2 x 1/4 x 7/8 Metal Grinding Disc

BHA 4-1/2 x 1/4 x 7/8 Metal Grinding Disc

BHA9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Type 27 depressed-center disc in extra coarse 24 grit aluminum oxide, fiberglass reinforced and precision balanced. Rated for 13,300 RPM, it suits steel, stainless steel and cast iron, and the five-pack keeps spares on hand.

Pros

  • 24 grit aluminum oxide removes material quickly
  • Depressed-center Type 27 shape for weld dressing, beveling and heavy stock removal
  • Fiberglass reinforced and precision balanced for smooth, chatter-free grinding
  • Rated for 13,300 RPM, with a 7/8 in arbor for standard 4-1/2 in grinders

Cons

  • No warranty stated in the listing
  • Coarse 24 grit leaves a rough finish, so a finer disc is needed for smoothing
  • Five-pack is the smallest pack here
  • No grit options in the listing besides 24 grit
Merryland 20 Pack 80 Grit Flap Disc 4 1/2 inch

Merryland 20 Pack 80 Grit Flap Disc 4 1/2 inch

Merryland9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 80 grit zirconium flap disc in a 20-pack, with a fiberglass backing plate and a Type 29 shape for curved surfaces, contours and edges. The listing states it exceeds European Standard EN 13743 and is MPA Certified, and rates it for 13,300 RPM.

Pros

  • 80 grit zirconium suits intermediate removal, smoothing, paint prep and light deburring
  • Type 29 shape for curved surfaces, contours and edges
  • Listing states EN 13743 and MPA Certification
  • 20-pack is the largest pack here

Cons

  • No warranty stated in the listing
  • 80 grit is finer than 24 grit, so it removes material more slowly
  • No grit options in the listing besides 80 grit
Panlen Ceramic Grinding Disc for Angle Grinder

Panlen Ceramic Grinding Disc for Angle Grinder

panlen9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ceramic grinding disc in a 10-pack, with a T29 convex shape and a stated 15 to 25 degree working angle. The listing rates it for 13,300 RPM at 80 meters per second and claims 20X faster cutting, including a 16 mm rebar cut in under 10 seconds.

Pros

  • Ceramic grains for cutting, grinding and sharpening
  • T29 convex shape with a stated 15 to 25 degree working angle
  • Rated for 13,300 RPM at 80 meters per second
  • Stiff vulcanized fiber backing and double-reinforced resin bond

Cons

  • No warranty stated in the listing
  • No grit number stated, so the cut is hard to compare with a 24 or 80 grit disc
  • The 20X faster and 10-second rebar claims are the maker's claims, not a stated result
  • No safety certification stated
NuoDunco 10Pack 2 inch Grinding Wheel 3/8" Arbor

NuoDunco 10Pack 2 inch Grinding Wheel 3/8" Arbor

NuoDunco9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 in grinding wheel in a 10-pack for die grinders, mini angle grinders and high-speed drills, with a 3/8 in arbor and a stated max of 20,000 RPM. It suits grinding and polishing in tight places where a 4-1/2 in disc cannot reach.

Pros

  • 2 in size reaches tight places a 4-1/2 in disc cannot
  • Rated for 20,000 RPM, the highest max RPM here
  • Fits die grinders, mini angle grinders and high-speed drills
  • 10-pack keeps spares on hand

Cons

  • No warranty stated in the listing
  • No grit number stated
  • Small size means slow stock removal on large jobs

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Type Size Grit Max RPM Pack Warranty
BHA Type 27 Disc 9.5/10 Type 27 depressed center 4-1/2 x 1/4 x 7/8 in 24 grit 13,300 5 Not stated
Merryland 80 Grit Flap Disc 9.5/10 Type 29 flap disc 4-1/2 in 80 grit 13,300 20 Not stated
Panlen Ceramic Disc 9.5/10 T29 convex 4-1/2 in Not stated 13,300 10 Not stated
NuoDunco 2 In Mini Wheel 9.3/10 Die grinder wheel 2 in Not stated 20,000 10 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on November 2026.

How the picks were scored

Each disc is scored on performance, build, value, safety and warranty. No disc here states a UL or ETL listing, so safety points go only to the Merryland, whose listing states EN 13743 and MPA Certification. No listing here states a warranty term, so every disc scores zero on warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BHA Type 27 Disc 9.5 32 22 20 0 0
Merryland 80 Grit Flap Disc 9.5 27 20 19 4 0
Panlen Ceramic Disc 9.5 30 21 20 0 0
NuoDunco 2 In Mini Wheel 9.3 26 19 18 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

Buying guide: choosing the best grinding disc for metal

Type 27 vs Type 29 vs a mini wheel

The BHA is a Type 27 depressed-center disc, listed for weld dressing, beveling, chamfering, heavy stock removal and finishing. The Merryland is a Type 29 flap disc, listed for curved surfaces, contours and edges, with flaps that blend and smooth. The Panlen is a T29 convex disc with a stated 15 to 25 degree working angle. The NuoDunco is a 2 in wheel for die grinders and tight places. Match the shape to the job: depressed center for taking material down, flap for blending, and a mini wheel for spots a 4-1/2 in disc cannot reach.

Grit and abrasive

The BHA lists extra coarse 24 grit aluminum oxide, which its listing ties to removing material quickly. The Merryland lists 80 grit zirconium corundum, which its listing ties to intermediate material removal, smoothing after 40 or 60 grit, paint prep and light deburring. The Panlen lists ceramic grains, which its listing ties to cutting, grinding and sharpening, but states no grit number. The NuoDunco lists alumina particles and states no grit number. Lower grit removes material faster and leaves a rougher finish, while higher grit smooths.

Size and arbor

The 4-1/2 in discs here use a 7/8 in arbor, which fits a standard 4-1/2 in angle grinder. The NuoDunco is a 2 in wheel with a 3/8 in arbor, which fits die grinders, mini angle grinders and high-speed drills. Check the arbor on the grinder before ordering, since a disc with the wrong arbor cannot mount.

Max RPM

The 4-1/2 in discs are rated for 13,300 RPM, and the Panlen also states 80 meters per second. The NuoDunco is rated for 20,000 RPM. Match the rating to the grinder and never exceed the stated max RPM.

Pack size

The BHA ships as a 5-pack, the Merryland as a 20-pack, and the Panlen and NuoDunco as 10-packs. A larger pack suits a shop that burns through discs on weld cleanup and prep, while a smaller pack suits a single job or a first try with a new disc.

Use as directed. Check the disc for damage before mounting, fit the right arbor, keep the guard on, and wear eye protection and gloves when grinding. Never exceed the stated max RPM, and never use a damaged disc.

Before You Strike an Arc

  • Arbor: the 4-1/2 in discs use a 7/8 in arbor, while the NuoDunco mini wheel uses a 3/8 in arbor for die grinders.
  • Max RPM: the 4-1/2 in discs are rated 13,300 RPM and the mini wheel 20,000 RPM, so match the rating to the grinder.
  • Disc type: Type 27 for heavy stock removal and weld dressing, Type 29 flap for blending and smoothing, and the 2 in wheel for tight places.
  • Pack count: 5 discs in the BHA pack, 20 in the Merryland box, and 10 each in the Panlen and NuoDunco packs.

FAQ for welders

How do grinding discs work?

A grinding disc spins on an angle grinder, and its abrasive grains cut metal away from the surface. The discs here state aluminum oxide at 24 grit, zirconium at 80 grit, ceramic grains, and alumina particles. The disc type decides the shape of the cut: depressed center for flat work, flap for blending, and a mini wheel for tight places.

How long do grinding discs last?

The listings do not state a lifespan in hours or in discs per job. The Merryland listing claims long life, and the Panlen listing claims its ceramic grains stay sharp and reduce disc changes, but neither states a number. A disc is done when it stops cutting well or shows damage, and a fresh disc from the pack takes its place.

What size grinding disc fits a 4-1/2 in angle grinder?

The 4-1/2 in discs here fit a standard 4-1/2 in angle grinder with a 7/8 in arbor, per their listings. The NuoDunco 2 in wheel fits 3/8 in mini angle grinders, die grinders and high-speed drills instead. Check the arbor on the grinder before ordering, since the wrong arbor cannot mount.

Flap disc or grinding disc for weld cleanup?

A Type 27 grinding disc suits heavy stock removal and weld dressing, per the BHA listing. A Type 29 flap disc suits blending, smoothing and light deburring, per the Merryland listing. The Panlen ceramic disc is listed for weld grinding and blending. Start with the grinding disc to take the weld down, then finish with the flap disc to blend.

Related: best 4-1/2 grinding wheels, best flap disc for metal, best flap disc for weld grinding, flap disc vs grinding wheel, cut-off wheel vs grinding wheel, best grinding wheel for steel, aluminum oxide vs ceramic flap disc, best 4-1/2 inch flap disc, best angle grinder for welding prep, best die grinder for weld cleanup, best face shield for grinding, best respirator for grinding metal, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Best Flap Disc for Weld Grinding (2026)

Five flap discs for weld grinding, compared on abrasive grain, disc shape, arbor mounting, rated rotational speed, and the pack count each listing states.

Metal Fab Tools ·

What Grit Flap Disc for Weld Grinding?

How to choose between 40, 60, 80, and 120 grit flap discs for weld bead knockdown, flush blending, and pre-paint metal finishing.