Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Angle Grinder Uses: Cutting, Grinding and Stripping

Cut, grind and strip with one tool: this guide matches the wheel to the job, from a thin cutoff wheel for steel to a fiber disc for paint and rust.

Angle Grinder Uses: Cutting, Grinding and Stripping
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1DEWALT - DW8062 - 10,PK DW8062 4-1/2"x.045"x7/8"DEWALT - DW8062 - 10,PK DW8062 4-1/2"x.045"x7/8"9.6/10View on Amazon
  2. 2SALI 10 Pack 4-1/2 Inch Grinding WheelsSALI 10 Pack 4-1/2 Inch Grinding Wheels9.6/10View on Amazon
  3. 3TPmax 4-1/2" x7/8'' Stripping Discs Rust RemoverTPmax 4-1/2" x7/8'' Stripping Discs Rust Remover9.6/10View on Amazon

A grinder with the wrong wheel is a slow way to do a simple job. Angle grinder uses split into a few kinds of work: cutting stock to length, grinding a weld or an edge flat, and stripping paint and rust back to clean metal. Each job wants its own wheel, and the wheel that cuts well grinds badly, while the wheel that strips paint cannot cut at all. This guide walks through the uses in order, then the wheels that suit each one.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

DEWALT - DW8062 - 10,PK DW8062 4-1/2"x.045"x7/8"

DEWALT - DW8062 - 10,PK DW8062 4-1/2"x.045"x7/8"

DEWALT9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 4-1/2 inch by .045 inch thin cutoff wheels for fast, burr-free cuts in metal, with a proprietary aluminum oxide grain and 2 full sheets of fiberglass.

Pros

  • .045 inch thin wheel design for fast, burr-free cutting
  • Proprietary aluminum oxide grain for aggressive cutting action
  • 2 full sheets of fiberglass for durability and safety
  • 10 pack, sized for a shop that cuts often

Cons

  • A cutoff wheel suits cutting only, not grinding
  • No warranty term is stated
SALI 10 Pack 4-1/2 Inch Grinding Wheels

SALI 10 Pack 4-1/2 Inch Grinding Wheels

SALI9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 4-1/2 inch by 1/4 inch depressed-center grinding wheels for general-purpose metal and stainless steel, with a stated size of 115 by 6.0 by 22.2 mm.

Pros

  • Depressed-center shape for grinding edges and surfaces
  • Suits solid construction steel, tool steel, high-speed steel and sheet steel
  • Low vibration for operator convenience and longer use
  • 10 pack of 4-1/2 inch wheels with a 7/8 inch arbor

Cons

  • No warranty term is stated
  • No grit size is stated
  • The listing says it fits most 4-1/2 inch angle grinders, so check the arbor before ordering
TPmax 4-1/2" x7/8'' Stripping Discs Rust Remover

TPmax 4-1/2" x7/8'' Stripping Discs Rust Remover

TPmax9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 4-1/2 inch stripping discs with a 7/8 inch arbor for removing paint, rust, oxidation and weld spatter from metal, stone, wood and fiberglass.

Pros

  • Removes paint, rust, weld spatter, scaling and oxidation
  • Suits metal, stone, wood and fiberglass surfaces
  • Fiber mesh base with resin elastomer and diamond for wear resistance
  • 10 pack, made for 4-1/2 inch angle grinders

Cons

  • No thickness is stated in the title or bullets
  • No warranty term is stated
  • A stripping disc does not cut or grind metal
  • The title also calls them angle grinding wheels, which muddles what they are

Angle grinder uses: the short answer

Cut with a thin cutoff wheel, grind with a depressed-center wheel, and strip with a fiber disc. Match the wheel to the job, keep the guard on, and let the wheel do the work instead of forcing it through the cut.

Cutting steel with a thin wheel

A thin cutoff wheel slices through stock fast and leaves a narrow kerf, which keeps heat down and saves material. The DEWALT wheel (on Amazon) in this guide is the cutting pick: a .045 inch wheel with a proprietary aluminum oxide grain and 2 full sheets of fiberglass, made for fast, burr-free cuts. Hold the grinder steady, let the wheel reach full speed before it touches the metal, and cut in a straight line without twisting the wheel in the kerf.

A cutoff wheel is for cutting only. Side pressure bends a thin wheel and can break it, so never use a cutoff wheel to grind a weld flat or to smooth an edge. Swap to a grinding wheel for that work, and keep the cutting wheel for straight cuts.

Grinding welds and edges flat

A depressed-center grinding wheel takes down a weld bead, smooths a cut edge and shapes metal without digging in. The SALI wheel (on Amazon) in this guide is the grinding pick: a 1/4 inch aluminum oxide wheel with a depressed center, made for edges and surfaces on steel and stainless steel. Work at a shallow angle, keep the wheel moving across the surface, and let the weight of the grinder feed the cut.

Grinding makes sparks and dust, so point the sparks away from the bench and from anything that burns. A grinding wheel also wears down as it works, so check the wheel often and swap it before it gets thin. The best flux core welder guide covers machines whose welds need this kind of cleanup.

Stripping paint, rust and scale

A fiber stripping disc takes paint, rust, weld spatter, scaling and oxidation off a surface without gouging the metal under it. The TPmax disc (on Amazon) in this guide is the stripping pick: a 4-1/2 inch poly strip wheel with a 7/8 inch arbor, built on a fiber mesh base with resin elastomer and diamond. It suits metal and stone, and also wood and fiberglass surfaces, per the listing.

Strip before welding or painting, not after. A clean surface takes a weld better and holds paint longer, and a stripping disc gets there faster than a wire brush on a large panel. Keep the disc flat on the surface and move in slow passes, so the disc cleans evenly instead of cutting a groove.

Side by side

Type Diameter Thickness Arbor Pack
DEWALT DW8062 Cutoff Wheel Thin cutoff wheel 4-1/2 in .045 in 7/8 in 10 pack
SALI Grinding Wheel Depressed-center grinding wheel 4-1/2 in 1/4 in 7/8 in 10 pack
TPmax Stripping Disc Poly strip wheel 4-1/2 in 0.039 in (spec table) 7/8 in 10 pack

Each wheel here is a 4-1/2 inch wheel with a 7/8 inch arbor in a 10 pack, so the choice comes down to the job on the bench, not the size of the wheel. The DEWALT wheel cuts, the SALI wheel grinds, and the TPmax disc strips.

The wheels for this guide

The job on the bench decides the wheel, and the wheels below cover the uses in this guide: cutting, grinding and stripping, each on a 4-1/2 inch grinder with a 7/8 inch arbor.

What goes wrong

  • Wrong wheel for the job. A cutoff wheel used for grinding can break under side pressure, and a grinding wheel used for cutting leaves a wide kerf and slow progress. Match the wheel to the job before the grinder starts.
  • Forcing the wheel. Pushing hard heats the metal and wears the wheel fast. Let the wheel cut at its own pace and keep the grinder moving.
  • Skipping the guard. A grinder without its guard throws sparks and broken wheel fragments at the operator. Keep the guard on and pointed between the wheel and the body.
  • A worn or cracked disc. A disc with a crack or a chip can come apart at speed. Check each disc before use and swap a damaged one before it runs.

Sparks, dust and noise. Grinding throws sparks and dust, so wear eye protection and gloves, keep flammables clear of the bench, and work with ventilation. Check the disc for cracks before each use, keep the guard on, and unplug the grinder before swapping a wheel.

FAQ for welders

Can you cut metal with an angle grinder?

Yes, with a thin cutoff wheel. A .045 inch wheel slices through stock fast and leaves a narrow kerf, and the DEWALT wheel in this guide is made for that work. Cut in a straight line, let the wheel reach full speed before it touches the metal, and never twist the wheel in the kerf.

What wheel do you use to grind a weld flat?

A depressed-center grinding wheel. The SALI wheel in this guide is a 1/4 inch aluminum oxide wheel for edges and surfaces on steel and stainless steel, with a very good removal rate and no clogging, per the listing. Work at a shallow angle and keep the wheel moving so it does not dig in.

Can an angle grinder remove paint and rust?

Yes, with a fiber stripping disc. The TPmax disc in this guide removes paint, rust, weld spatter, scaling and oxidation from metal and stone, and also suits wood and fiberglass surfaces. Keep the disc flat on the surface and move in slow passes for an even clean.

What size wheel fits a 4-1/2 inch angle grinder?

A 4-1/2 inch wheel with a 7/8 inch arbor. All the wheels in this guide are 4-1/2 inch wheels with a 7/8 inch arbor, so they fit a 4-1/2 inch grinder. Check the arbor on the grinder before ordering, since a wheel with the wrong arbor will not mount.

Do you need a different wheel for stainless steel?

Yes, use a wheel rated for stainless steel. The SALI wheel in this guide is made for general-purpose metal and stainless steel, so it covers stainless work as well as plain steel.

Related: best angle grinder, best wire wheel for angle grinder, best welder for beginners and the metal fab tools hub. Also see the welding consumables hub.

More buying guides

Metal Fab Tools ·

Die Grinder Uses: Common Jobs and Bits

A die grinder handles grinding, deburring, rust and paint removal, sanding and polishing in tight spots, and the disc kit decides how far each…

Metal Fab Tools ·

Angle Grinder Types: Which One to Buy

Angle grinder types split by power source, disc size, switch and guard. Corded, cordless and pneumatic compared, with the figures that show what each…

Metal Fab Tools ·

Angle Grinder Guard Types and Uses

Angle grinder guards deflect sparks and debris, and the right type depends on the wheel size and the gearcase: standard adjustable guards, dust shrouds…