Best Flap Disc Grit 80 (2026): 5 Discs Compared
Five 80 grit flap discs for grinding, blending and rust removal, compared by type, flap count, pack size and grinder fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEZARC 80 Grit9.5/10View on Amazon - 2
Best Bulk PackSALI 100 Pack9.5/10View on Amazon - 3
Best Type 27ROZZLOOM 2 Pack9.3/10View on Amazon - 4
Best Mid PackPukamam 14 Pack9.4/10View on Amazon
A weld bead needs blending, a rust patch needs stripping, and a sharp edge needs knocking down before fit-up. This guide compares the best flap disc grit 80 options for that bench work, using only what each listing states about grit, disc type, pack size and grinder fit.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall EZARC 80 Grit: 90 high-density flaps at up to 13,300 RPM Check price on Amazon
- Best Bulk Pack SALI 100 Pack: 100 discs with fiberglass backing for shop use Check price on Amazon
- Best Type 27 ROZZLOOM 2 Pack: Type 27 profile in a 2-disc pack Check price on Amazon
- Best Mid Pack Pukamam 14 Pack: 14 discs at up to 13,300 RPM Check price on Amazon
The machines

EZARC Zirconia Flap Discs 80 Grit High Density
A high-density 12-pack for heavy stock removal, for welders who want more flaps per disc; skip it if a flat profile is wanted.
Pros
- 90 flaps per disc, 25% more than standard 72 flaps as stated
- Blue zirconia oxide grains with a stated 50% longer lifetime
- Type 29 bevel for edge and corner grinding at 15 to 20 degrees
- Rated for grinders up to 13,300 RPM
Cons
- No warranty term stated
- No safety standard stated
- 12-pack only, with no bulk option stated

Sali 100 Pack Zirconia Flap Disc 80 Grit 4.5" x
A 100-pack for shop use, for welders who burn through discs; skip it if only a few discs are needed.
Pros
- 100 discs in the pack
- Industrial grade premium zirconia aluminum abrasive
- Resin fiber with a fiberglass backing plate
- Rated for grinders up to 13300 RPM
Cons
- No warranty term stated
- No safety standard stated
- No flap count stated
- Same disc specs as the 48-pack listing, so pack size is the main difference

Sali 48 Pack Flap Disc 80 Grit 4.5" x 7/8-Inch
The same SALI disc in a 48-pack, for welders who want bulk without 100 discs; skip it if the 100-pack suits the shop better.
Pros
- 48 discs in the pack
- Zirconia alumina abrasive for aggressive grinding
- Fiberglass backing plate absorbs vibrations
- Rated for grinders up to 13,300 rpm
Cons
- No warranty term stated
- No safety standard stated
- No flap count stated
- Same disc specs as the 100-pack listing

14 Pack Zirconia Flap Discs 4 1/2 for Angle
A 14-pack for general grinding, for welders who want a mid-size pack; skip it if a stated flap count matters.
Pros
- 14 discs in the pack
- Zirconium oxide abrasives for durability and strength
- Rated for grinders up to 13,300 RPM
- 4-1/2 inch diameter with a 7/8 inch arbor
Cons
- No warranty term stated
- No safety standard stated
- No flap count or backing material stated

ROZZLOOM Zirconia 4 1/2 Flap Discs for Angle
A 2-pack Type 27 disc for light or occasional use, for welders who want to try the disc first; skip it if a stated max RPM is needed.
Pros
- 80 grit zirconium corundum for fast grinding
- Anti-static and anti-clogging, as stated
- Works on wood, metal, stainless steel, paint and plastic, as stated
- 2-disc pack for small jobs
Cons
- No max RPM stated
- No warranty term stated
- No safety standard stated
- No flap count or backing material stated
Other welders and gear to compare
DEWALT DWA8208 80 Grit Zirconia T29 FlapCheck price on Amazon
EZARC Zirconia Flap Discs 80 GritCheck price on Amazon
EZARC Ceramic Flap Discs 80 GritCheck price on Amazon
EZARC Aluminum Oxide Flap Discs 80 GritCheck price on Amazon
Zirconia Flap Disc 80 Grit High DensityCheck price on Amazon
Spec sheet comparison
| Disc | Gear Score | Type | Grit | Size | Pack |
|---|---|---|---|---|---|
| EZARC 80 Grit | 9.5/10 | Type 29 | 80 | 4.5 x 7/8 | 12-pack |
| SALI 100 Pack | 9.5/10 | Type 29 | 80 | 4.5 x 7/8 | 100-pack |
| SALI 48 Pack | 9.5/10 | Type 29 | 80 | 4.5 x 7/8 | 48-pack |
| Pukamam 14 Pack | 9.4/10 | Type 29 | 80 | 4.5 x 7/8 | 14-pack |
| ROZZLOOM 2 Pack | 9.3/10 | Type 27 | 80 | 4.5 x 7/8 | 2-pack |
All specs here repeat what the maker rates and the listing prints, copied down 3 November 2026. None of these listings states a safety standard or a warranty term, so all five score zero for safety and warranty.
Buying guide: choosing the best flap disc grit 80
Type 29 bevel or Type 27
Four listings state Type 29 bevel discs, angled for contours, edge and weld blending and radius grinding. The ROZZLOOM listing states Type 27 instead, so a buyer who wants the bevel profile should stick with the Type 29 listings. All five discs share the same 4-1/2 inch diameter and 7/8 inch arbor size.
Flap count and density
Only the EZARC listing states a flap count: 90 flaps per disc, against a standard 72 flaps in common variants as stated. The other listings state no flap count, so density cannot be compared across them. A stated count plus a stated backing material, like the SALI fiberglass backing plate, gives a clearer picture than a material name alone.
Pack size and shop use
Pack sizes run from 2 discs to 100 discs across these listings. A 2-disc pack suits a short job or trying a disc, a 12 or 14-disc pack suits steady bench work, and the 48 and 100-disc SALI packs suit a shop that burns through discs. The two SALI listings share disc specs, so pack size is the real choice between them.
Max RPM and grinder fit
Four listings state a grinder speed of up to 13,300 RPM, and all five state the 4-1/2 inch diameter with a 7/8 inch arbor for most angle grinders. The ROZZLOOM listing states no max RPM, so its grinder fit cannot be checked the same way. Check the stated arbor and speed against the grinder before ordering.
Before You Strike an Arc
- Check the stated 7/8 inch arbor and the stated max RPM against the grinder; the ROZZLOOM listing states no max RPM.
- Use the working angle the listing states for Type 29 bevel work: 15 to 20 degrees on the EZARC listing.
- Follow the Pukamam listing advice that goggles and other safety precautions are recommended for use.
- Check the disc on arrival: the EZARC and Pukamam spec tables list 1.0 inch dimensions that do not match the stated 4-1/2 inch diameter.
FAQ for welders
What does 80 grit mean for stock removal?
80 grit is coarse. The EZARC listing states an 80 grit disc is coarser in build and ideal for heavier stock removal, and the SALI listings state the same grit suits aggressive grinding on hard materials like metal.
Is Type 29 better than Type 27?
Neither is better in general; the listings describe different profiles. Type 29 discs are bevelled for edges, corners and weld blending, while the ROZZLOOM listing states Type 27 without describing a bevel, so buyers who want the bevel profile should pick a Type 29 listing.
Will these discs fit my angle grinder?
All five state a 4-1/2 inch diameter with a 7/8 inch arbor, fitting most angle grinders as stated. Four listings state a grinder speed of up to 13,300 RPM, while the ROZZLOOM listing states no max RPM.
How many discs do I need?
Pack sizes here run from 2 discs to 100 discs. A small pack suits a short job, while the SALI 48 and 100 packs suit a shop that uses discs steadily.
Do flap discs work on wood?
Yes, as stated. The EZARC, SALI and ROZZLOOM listings state use on wood as well as metal, with the SALI listings also naming plastics, paint and rust removal.
Scoring, line by line
Each disc is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on the How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| EZARC 80 Grit | 9.5 | 32 | 22 | 21 | 0 | 0 |
| SALI 100 Pack | 9.5 | 30 | 21 | 22 | 0 | 0 |
| SALI 48 Pack | 9.5 | 30 | 21 | 20 | 0 | 0 |
| Pukamam 14 Pack | 9.4 | 28 | 20 | 20 | 0 | 0 |
| ROZZLOOM 2 Pack | 9.3 | 27 | 19 | 18 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.
More welding guides
See the metal fab tools hub, the best 4-1/2 inch flap disc, the aluminum oxide vs ceramic flap disc comparison and the best angle grinder for welding prep.




