Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Locking Pliers: Curved Jaw vs Long Nose

Locking pliers clamp and lock on the work, and the sets in this guide pair curved jaw pliers for round stock with long nose pliers for tight spaces.

Types of Locking Pliers: Curved Jaw vs Long Nose
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WORKPRO 5-Piece Locking Pliers SetWORKPRO 5-Piece Locking Pliers Set9.7/10View on Amazon
  2. 2WORKPRO 5-Piece Locking Pliers SetWORKPRO 5-Piece Locking Pliers Set9.6/10View on Amazon
  3. 3SK 5-Piece Locking Pliers SetSK 5-Piece Locking Pliers Set9.6/10View on Amazon
  4. 4FASTPRO 4-Piece Locking Pliers Set with Heavy DutyFASTPRO 4-Piece Locking Pliers Set with Heavy Duty9.6/10View on Amazon

A part needs holding while the bead goes down, and a plain plier will not stay put. That is the job for locking pliers: pliers that clamp, lock and hold the work so the hands stay free for the torch. The types of locking pliers in this guide are curved jaw and long nose, and the sets below pair both types in sizes from 5 inch to 10 inch.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

WORKPRO 5-Piece Locking Pliers Set

WORKPRO 5-Piece Locking Pliers Set

WORKPRO9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece locking pliers set in CR-MO steel with 5, 7 and 10 inch curved jaw and 6.5 and 9.5 inch long nose pliers, a perforated adjustment screw and nickel plating.

Pros

  • CR-MO steel jaws resist torsion and deformation
  • Curved jaw grips rounded objects; long nose reaches confined spaces
  • Perforated screw takes a screwdriver for added leverage
  • Diamond-knurled handles grip well with oil or moisture present

Cons

  • No wire cutter, unlike the WORKPRO CR-V set
  • No pouch or case is stated for storage
  • Longest long nose is 9.5 inch
  • No warranty term is stated
WORKPRO 5-Piece Locking Pliers Set

WORKPRO 5-Piece Locking Pliers Set

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece locking pliers set in drop-forged CR-V steel with 5, 7 and 10 inch curved jaw and 6.5 and 9 inch long nose pliers, plus an integrated wire cutter.

Pros

  • Drop-forged CR-V steel for strength and durability
  • Integrated wire cutter adds function
  • Curved jaws grip round, square and flat materials
  • Precision-adjustable mechanism for a grip that holds under pressure

Cons

  • No perforated screw for screwdriver leverage is stated
  • No pouch or case is stated for storage
  • No handle texture is stated
  • No warranty term is stated
SK 5-Piece Locking Pliers Set

SK 5-Piece Locking Pliers Set

SK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece locking pliers set in CR-V steel with 5, 7 and 10 inch curved jaw and 6.5 and 9.5 inch long nose pliers, a screwdriver through-hole and a rolling pouch.

Pros

  • CR-V steel, heat treated and nickel-plated
  • Screwdriver through-hole adds leverage
  • Trigger release for one-handed release
  • Rolling pouch keeps the set organized

Cons

  • No wire cutter is stated
  • Longest long nose is 9.5 inch
  • No automotive use is stated
  • No diamond-knurled handle texture is stated
FASTPRO 4-Piece Locking Pliers Set with Heavy Duty

FASTPRO 4-Piece Locking Pliers Set with Heavy Duty

FASTPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece locking pliers set in carbon steel with 5, 7 and 10 inch curved jaw and 6.5 inch long nose pliers, an adjustable tension screw and one-handed release.

Pros

  • Heat-treated alloy steel construction
  • One-handed release trigger
  • Anti-slip handle reduces vibration and hand fatigue
  • Adjustable tension screw for different jaw openings

Cons

  • 4-piece set: only one long nose size, 6.5 inch
  • No wire cutter is stated
  • No pouch or case is stated for storage
  • No nickel plating is stated

Types of locking pliers

The sets in this guide cover two types: curved jaw and long nose. Curved jaw pliers grip round stock and flat stock, and long nose pliers reach into tight spaces for small parts. Every set below carries both types, in sizes from 5 inch to 10 inch, so one set suits bench work and fit-up.

Side by side

Pliers Gear Score Pieces Curved jaw Long nose Steel
WORKPRO CR-MO 5-Piece Set 9.7/10 5 5, 7, 10 in 6.5, 9.5 in CR-MO
WORKPRO CR-V 5-Piece Set 9.6/10 5 5, 7, 10 in 6.5, 9 in CR-V
SK 5-Piece Locking Pliers 9.6/10 5 5, 7, 10 in 6.5, 9.5 in CR-V
FASTPRO 4-Piece Set 9.6/10 4 5, 7, 10 in 6.5 in Carbon steel

All four sets carry curved jaw pliers in 5, 7 and 10 inch, while long nose sizes run 6.5 inch alone in the FASTPRO set and 6.5 and 9.5 inch or 6.5 and 9 inch in the 5-piece sets.

Curved jaw locking pliers

Curved jaw is the general gripper. WORKPRO states its curved jaw variants suit gripping rounded objects, and its other set states curved jaws grip round, square and flat materials. The curved jaw sizes in these sets are 5, 7 and 10 inch. See our best locking pliers for welding picks for curved jaw sets built for the bench.

Long nose locking pliers

Long nose is the reacher. WORKPRO states its long nose variants reach confined spaces and grasp small components, and the other WORKPRO set states its long nose pliers reach tight spaces. The long nose sizes here are 6.5 inch in every set, with 9.5 inch in two sets and 9 inch in one set.

Steel and finish

Three steels show up across the sets. SK and one WORKPRO set use CR-V steel, the other WORKPRO set uses CR-MO steel, and FASTPRO uses carbon steel, heat treated. SK and the WORKPRO CR-MO set are nickel plated, which the makers state resists rust. FASTPRO states heat-treated alloy steel construction.

Adjustment and release

Each set adjusts the jaw opening: SK, the WORKPRO CR-MO set and FASTPRO name an adjustment screw, and the WORKPRO CR-V set states a precision-adjustable locking mechanism. SK states a screwdriver through-hole design that increases leverage, and the WORKPRO CR-MO set states a flat head perforated screw that takes a screwdriver through the hole for added leverage. SK and FASTPRO state a trigger release, and FASTPRO states one-handed release. The WORKPRO CR-MO set states a precision-threaded adjustment screw for consistent jaw alignment.

Locking pliers sets for the bench

Size is the step where the gear matters: each set below states its curved jaw and long nose sizes, so match the set to the work on the bench.

FAQ for welders

What are the types of locking pliers?

The sets in this guide cover two types: curved jaw and long nose. Curved jaw pliers grip round, square and flat stock, while long nose pliers reach tight spaces and small parts. Every set below pairs both types.

What is a curved jaw locking plier for?

Curved jaw pliers grip rounded objects and flat stock. WORKPRO states its curved jaw variants suit gripping rounded objects, and its other set states curved jaws grip round, square and flat materials. The curved jaw sizes in these sets are 5, 7 and 10 inch.

What is a long nose locking plier for?

Long nose pliers reach confined spaces and grasp small components. WORKPRO states its long nose variants are ideal for accessing confined spaces, and its other set states they reach tight spaces. Every set here carries a 6.5 inch long nose plier.

What steel are locking pliers made from?

The sets here use three steels: CR-V, CR-MO and carbon steel. SK and one WORKPRO set use CR-V steel, the other WORKPRO set uses CR-MO steel, and FASTPRO uses carbon steel. SK and the WORKPRO CR-MO set are nickel plated, which the makers state resists rust.

How do you adjust locking pliers?

Turn the adjustment screw at the tail to set the jaw opening. SK and the WORKPRO CR-MO set state a screwdriver through-hole in the screw that adds leverage when tightening. FASTPRO states an adjustable tension screw, and the WORKPRO CR-V set states a precision-adjustable locking mechanism.

Related: best locking pliers set, best locking pliers for welding, locking pliers vs C-clamp, and the metal fab tools hub.

More buying guides