Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Locking Pliers Set Under $50 (2026)

Five locking pliers sets under $50 compared by pieces, jaw types and materials, so your next clamp-up holds tight.

Best Locking Pliers Set Under $50 (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KRETLAW 6-Piece Set6-Piece SetKRETLAW 6-Piece Set9.6/10View on Amazon
  2. 2Evertools 6-Piece SetHeat-Treated 6-PieceEvertools 6-Piece Set9.6/10View on Amazon
  3. 3WORKPRO 4-Piece SetChrome Vanadium SetWORKPRO 4-Piece Set9.5/10View on Amazon
  4. 4Klein 38665 3-Piece3-Piece SetKlein 38665 3-Piece9.5/10View on Amazon
  5. 5Klein 38663 2-PieceLightest setKlein 38663 2-Piece9.4/10View on Amazon

Locking pliers are the third hand every welder wishes for: clamp the work, lock the jaws, and both hands are free for the torch or the grinder. A good set covers the shapes you actually hold, curved jaws for round stock, long nose for tight spots, and a C-clamp for flat work. This guide covers the best locking pliers set under 50, five sets ranked on what their listings state. Pick the set size that matches your bench, check the jaw types, and read the materials before you buy.

The KRETLAW, Evertools and WORKPRO sets use TPR handles, the Klein 38665 uses high carbon steel handles, and the Klein 38663 uses stainless steel handles. None of these sets claims a warranty term, so buy on the listing’s completeness, not on promises.

A locking plier is a simple machine: an adjustment screw sets the jaw opening, a lever locks it, and the teeth do the holding. The differences between sets are the details that matter in daily use, how many shapes are included, whether the jaws are heat treated, how the release feels, and whether the listing tells you the truth about what is in the box. The five sets below are judged on exactly that.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • 6-Piece Set KRETLAW 6-Piece Set: 6 pieces with stated jaw capacities and a roll-up pouch Check price on Amazon
  • Heat-Treated 6-Piece Evertools 6-Piece Set: Heat-treated jaws and quick release for welding work Check price on Amazon
  • Chrome Vanadium Set WORKPRO 4-Piece Set: Chrome vanadium jaws with one-handed release trigger Check price on Amazon
  • 3-Piece Set Klein 38665 3-Piece: High locking force with pinch-free lever-less release Check price on Amazon
  • Lightest set Klein 38663 2-Piece: Stainless 2-piece set at 1.8 lb Check price on Amazon

The machines

Vice Grips Pliers Set, 6-Piece Locking Pliers Set

Vice Grips Pliers Set, 6-Piece Locking Pliers Set

KRETLAW9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6-piece set with 5, 7 and 10 in curved jaw pliers, 6-1/2 and 9-1/2 in long nose pliers and a 6 in C-clamp, in a roll-up pouch. The listing states jaw capacities for every tool, TPR handles and a black 600D pouch with 6 pockets.

Pros

  • 6 pieces cover curved jaw, long nose and C-clamp needs in one buy
  • Jaw capacities stated for every tool, up to 4-1/16 in on the long nose
  • Dual-color TPR handles give a non-slip ergonomic grip
  • 600D roll-up pouch with 6 pockets keeps the set organized

Cons

  • No warranty term is stated anywhere in the listing
  • Pliers ship coated in protective oil that must be wiped off before use
  • No weight is stated for the set or any single tool
  • Carbon steel with nickel plating, not chrome vanadium
Locking Pliers Set,5"/7"/10" Curved Jaw Vise

Locking Pliers Set,5"/7"/10" Curved Jaw Vise

Evertools9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6-piece set with curved jaw, long nose and C-clamp pliers, heat-treated carbon steel with TPR handles. The listing names welding and metal bending among its uses and states a 4 lb set weight.

Pros

  • 6 pieces for welding, metal bending and woodworking in one set
  • Heat-treated carbon steel jaws resist wear and deforming
  • Quick-release lever allows smooth one-handed operation
  • Soft anti-slip TPR handles reduce hand fatigue on long jobs

Cons

  • No warranty term is stated anywhere in the listing
  • No jaw capacities are stated for any of the six tools
  • 4 lb set weight with no per-tool breakdown
  • No storage pouch or bag is stated
WORKPRO 4-Piece Locking Pliers Set

WORKPRO 4-Piece Locking Pliers Set

WORKPRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

4-piece set with 5-1/2, 7 and 9 in curved jaw pliers and a 6-1/2 in long nose, drop-forged from chrome vanadium steel with heat-treated jaws, TPR handles and a storage bag, 1.55 kg.

Pros

  • Drop-forged chrome vanadium jaws, further heat treated for hardness
  • One-handed release trigger frees the other hand for the work
  • TPR anti-slip soft grips reduce pressure on the hands
  • Storage bag included for the four tools

Cons

  • No warranty term is stated anywhere in the listing
  • 4 pieces with no C-clamp for flat work
  • 1.55 kg set weight with no per-tool weights
  • No jaw capacities are stated
Klein Tools 38665 Locking Pliers Set

Klein Tools 38665 Locking Pliers Set

KLEIN TOOLS9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

3-piece set with 6 in long nose and 7 and 10 in curved jaw pliers, alloy steel with high carbon steel handles, 2.8 lb, black. The spec table disagrees with the title on the model number.

Pros

  • High locking force with hardened teeth for a secure hold
  • Lever-less quick release handles will not pinch fingers
  • Rust preventative coating protects against corrosion
  • Molded grips shaped for all-day comfort

Cons

  • Warranty reads only 'Call vendor for warranty', with no term stated
  • 2.8 lb for 3 pieces makes it the heaviest per piece here
  • No C-clamp is included in the set
Klein Tools 38663 Locking Pliers Set

Klein Tools 38663 Locking Pliers Set

KLEIN TOOLS9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

2-piece set with 7 in long nose and 10 in curved jaw pliers, stainless steel, 1.8 lb, orange. The spec table disagrees with the title on the long nose size.

Pros

  • Stainless steel construction resists rust in damp shops
  • High locking force with hardened teeth for maximum hold
  • Pinch-free lever-less release for easy one-handed use
  • 1.8 lb makes it the lightest set of the five

Cons

  • Warranty reads only 'Call vendor for warranty', with no term stated
  • Only 2 pieces, the smallest set here
  • 12.88 x 4.25 in dimensions cover the set, not each tool

Other welders and gear to compare

Spec sheet comparison

Product Pieces Jaw types Weight
KRETLAW 6-Piece Set 6 Curved, long nose, C-clamp Not stated
Evertools 6-Piece Set 6 Curved, long nose, C-clamp 4 lb
WORKPRO 4-Piece Set 4 Curved, long nose 1.55 kg
Klein 38665 3-Piece 3 Long nose, curved 2.8 lb
Klein 38663 2-Piece 2 Long nose, curved 1.8 lb

22 October 2026

Specifications are manufacturer rated, as published on each listing and compared below. Set size is the first filter, and it is the one spec no listing can fudge: count the tools in the product photos against the title. All five listings here show what they claim, which is more than can be said for their spec tables.

Set size is the first filter: more pieces cover more jobs, but every piece should earn its place. Then compare jaw types, materials and the release design.

Buying guide: best locking pliers set under 50

Set size first

The 6-piece sets cover the most: curved jaw, long nose and C-clamp in several sizes. The KRETLAW and Evertools sets both give you 5, 7 and 10 in curved jaws plus long nose pliers and a C-clamp. The WORKPRO 4-piece drops the C-clamp. The Klein 3-piece and 2-piece are for minimalists. If you clamp often, the bigger set pays for itself the first time you need the size you did not buy.

Jaw types and capacities

Curved jaws grip round stock and bolts; long nose pliers reach into tight spots; C-clamps hold flat and tapered work. Only the KRETLAW listing states jaw capacities: up to 4-1/16 in on the long nose and 2-1/8 in on the curved jaws. When a listing states capacities, you can match the tool to the work before it arrives; when it does not, you are guessing. For welding, the long nose is the fit-up tool and the curved jaw is the holding tool.

Materials

The WORKPRO uses drop-forged chrome vanadium steel with heat-treated jaws, the classic locking-plier steel. The Evertools listing describes heat-treated carbon steel. The KRETLAW uses carbon steel with nickel plating, the Klein 38663 stainless steel, and the Klein 38665 alloy steel. Heat treatment matters more than the alloy name: it is what keeps the teeth biting after years of use. Stainless resists rust in damp shops; nickel plating does the same for carbon steel.

Handles and release

All five describe ergonomic or molded grips, and all describe a quick release. The Klein sets use a lever-less release that will not pinch; the others use a traditional release lever or trigger. Try the release action in the store if you can: it is the part your hand touches every time. A release that fights you will make you hate an otherwise good plier.

Reading the listing

Two of these listings disagree with themselves. The Klein 38663 title says 7 in long nose while its spec table says 6 in; the Klein 38665 is model 38665 but its spec table says Mfg. No. 38664 with a C-clamp description. When title and spec table conflict, trust the title and confirm with the seller. A listing that cannot keep its own model numbers straight is telling you something about its attention to detail.

Storage

The KRETLAW comes in a 600D roll-up pouch with 6 pockets and a buckle; the WORKPRO includes a storage bag. The others list no storage, so plan a drawer or a tool roll. Locking pliers are at their best when every size is in the same place: a scattered set is a set you will not use.

FAQ for welders

What size locking pliers do I need?

Match the jaw to the work. The KRETLAW listing states capacities from 1-1/4 in up to 4-1/16 in across its set, which covers most home shop jobs. Small work needs the long nose; big round stock needs the 10 in curved jaw. When in doubt, the mid-size curved jaw is the one you will reach for most.

What is the C-clamp for?

Holding flat and tapered work: sheet edges, angle iron, and anything a jaw cannot wrap. The KRETLAW and Evertools sets include a 6 in C-clamp; the WORKPRO and Klein sets do not. If you weld sheet and angle, the C-clamp earns its place.

Are locking pliers good for welding?

Yes, as clamps and positioners, not as a substitute for proper fixturing. The Evertools listing names welding among its uses. Clamp the work, check the fit-up, then weld; never strike an arc with the pliers as the only thing holding a load.

How do I adjust the clamping pressure?

Turn the adjustment screw at the handle end: tighter for a harder bite, looser for delicate work. All five listings describe an adjustable screw or knob. Set it on scrap first, then clamp the work.

Why do the Klein listings disagree with their spec tables?

Listings contradict themselves. The 38663 title says 7 in long nose while its spec table says 6 in; the 38665 is model 38665 but its spec table says Mfg. No. 38664 with a C-clamp description. Trust the title over the spec table, and confirm with the seller when the size matters.

Related: best welding clamps for fabrication and our metal fab tools hub.

Scoring, line by line

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
KRETLAW 6-Piece Set 9.6 29 20 20 n/a 0
Evertools 6-Piece Set 9.6 28 20 20 n/a 0
WORKPRO 4-Piece Set 9.5 28 19 19 n/a 0
Klein 38665 3-Piece 9.5 27 19 19 n/a 0
Klein 38663 2-Piece 9.4 26 18 18 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

Each set is scored on performance, build, value, safety and warranty, using only what its listing states. Complete sets with stated jaw capacities and materials earn most of the available points; thin listings and contradictions score lower. No warranty term is stated on any of the five, so warranty scores are zero across the board. The ranking below follows the totals, highest first, with the two 6-piece sets on top.

More buying guides