Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

#2 Center Drill Dimensions Chart

The #2 center drill measures 3/16 inch across the body with a 5/64 inch pilot and a 1-7/8 inch overall length, and this guide shows the full size chart and how to read it.

#2 Center Drill Dimensions Chart
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 125-Piece Punch and Chisel Set with Roll Pin Punches25-Piece Punch and Chisel Set with Roll Pin Punches9.7/10View on Amazon
  2. 2TEKTON Center Punch SetTEKTON Center Punch Set9.7/10View on Amazon
  3. 3Mayhew Tools 62215 Center PunchMayhew Tools 62215 Center Punch9.6/10View on Amazon

A lathe job starts with a center hole, and a wobbling start means a wandering drill and a spoiled part. #2 center drill dimensions are the body, pilot and length figures that identify that size in a set, and this guide reads them straight from the listings.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

#2 center drill dimensions

The listings state the #2 size as a 3/16 inch body with a 5/64 inch pilot and a 1-7/8 inch overall length. The Accusize set lists each size the same way, body by pilot by overall length. Those 3 figures are the whole size: the body is the wide shank the chuck grips, the pilot is the small drill point, and the overall length is the bit end to end.

The listings state a 60 degree included angle on the countersink, and the Accusize listing notes the 60 degree countersink angle fits all standard centers. That angle is what the center hole is cut to, so the work sits true on the machine centers.

Side by side

#1 center drill #2 center drill #3 center drill #4 center drill #5 center drill
Body diameter 1/8 inch 3/16 inch 1/4 inch 5/16 inch 7/16 inch
Pilot diameter 3/64 inch 5/64 inch 7/64 inch 1/8 inch 3/16 inch
Overall length 1-1/4 inch 1-7/8 inch 2 inch 2-1/8 inch 2-3/4 inch
Included angle 60 degree 60 degree 60 degree 60 degree 60 degree
Material in the listing M42 HSS, 8% cobalt M42 HSS, 8% cobalt M42 HSS, 8% cobalt M42 HSS, 8% cobalt M42 HSS, 8% cobalt

Read the table by columns: each column is a size in the set, and each row is a figure. The #2 column is the size this guide covers. Listings state the sizes in the same order, #1 through #5.

What the numbers mean

Body diameter is the diameter of the wide part of the bit, and it is the figure the chuck grips. On the #2 bit the body is 3/16 inch, between the 1/8 inch body of the #1 and the 1/4 inch body of the #3. A body wider than the chuck’s capacity will not fit in the jaws, and a body narrower than the chuck’s minimum grip will not hold.

Pilot diameter is the diameter of the small drill point, and it sets the size of the hole the bit cuts before the countersink opens it out. On the #2 bit the pilot is 5/64 inch, stepping up with the size: 3/64 inch on the #1, 7/64 inch on the #3, 1/8 inch on the #4 and 3/16 inch on the #5.

Overall length is the bit measured end to end, and it decides how far the bit reaches past the chuck. The #2 bit is 1-7/8 inch long. The set runs from 1-1/4 inch on the #1 to 2-3/4 inch on the #5, with the #3 at 2 inch and the #4 at 2-1/8 inch.

The listings also state the steel. The Accusize set is M42 HSS with 8% cobalt. The toolant set is M35 cobalt HSS with 5% cobalt and a TiAlN coating, with a 118 degree split point the maker lists as a guard against walking. The DKIBBITH set is M2 high speed steel, and its listing states the bits cut material from 170HB up to 200HB.

How to read the size on the listing

Listings state the size in the set contents, usually as body by pilot by overall length. The Accusize listing states the full set this way: No.1 at 1/8 inch body by 3/64 inch pilot by 1-1/4 inch overall length, through No.5 at 7/16 inch body by 3/16 inch pilot by 2-3/4 inch overall length. The toolant listing states the same sizes as a short list: #1 at 3/64 inch, #2 at 5/64 inch, #3 at 7/64 inch, #4 at 1/8 inch and #5 at 3/16 inch. When a listing gives only the pilot, the body and length are not stated, so do not guess them from another listing.

Metric sets state the sizes in millimetres instead. The DKIBBITH 7 piece set lists sizes 1.0, 1.5, 2.0, 2.5, 3.0, 4.0 and 5.0, and its long set is 4 inch overall length in sizes 1.0, 2.0, 3.0, 4.0 and 5.0. Those figures do not line up with the #1 to #5 inch sizes, so a metric size is not a swap for an inch size. Our center drill bit sizes chart and our standard drill bit size chart put the sizes side by side.

Center drill or self-centering hinge bit

The same search results mix in a different tool: self-centering hinge bits, also called VIX bits, for cabinet and door hardware. Those bits come in 3/32 inch, 7/64 inch and 1/8 inch for #6, #8 and #10 screws, on a 1/4 inch hex shank, and the Bosch set lists bits for no.6, no.8 and no.10 screws. They drill pilot holes for hinges, strike plates and drawer slides, and their spring loaded guide centers the bit on the hardware. They are not lathe center drills, and their sizes are screw sizes, not center drill sizes. A listing that names hinges or a hex shank is a hinge bit, and a listing that names a lathe or a 60 degree countersink is a center drill. Our best twist drill bit set guide and our best drill bit set for wood and metal guide cover the general sets.

How to use a #2 center drill

Center drills cut the center hole that the work turns on, and they also cut starter holes for larger bits. The Accusize listing states the use plainly: for centering work ends where the workpiece is revolved on machine centers. The DKIBBITH listing states the same use for lathe machines and most drills, on steel, iron, aluminum, carbon steel and brass. The toolant listing adds stainless steel, hardened steel, alloy steel, cast iron, copper and wood, and states its bits suit work with diameters from 3/16 inch (5mm) to 5 inch (130mm).

Start the hole with light pressure and let the pilot cut before the countersink bears down. A center drill is short and stiff, which is what keeps the hole true, and pushing hard risks snapping the small pilot. Use cutting oil where the listing calls for it: the DKIBBITH long set listing states cutting oil helps in delicate material and notes low speed and lubrication for stainless steel.

Sharp bits and spinning work. Center drills cut fast and the work turns on a lathe, so wear eye and face protection, clamp the work, keep guards in place, and keep gloves away from rotating parts. Clear chips with a brush, not a bare hand, and stop the machine before measuring or adjusting the work. OSHA machine guarding rules cover the guards and the safe setup of this kind of work.

FAQ for welders

What are the #2 center drill dimensions?

The #2 center drill is 3/16 inch across the body, with a 5/64 inch pilot and a 1-7/8 inch overall length. Both the Accusize and toolant listings state the 5/64 inch pilot for the #2 size. The 60 degree included angle is the countersink angle on the bit.

What is a #2 center drill used for?

It cuts the center hole that lets work turn on machine centers, and it also cuts starter holes for larger drill bits. The Accusize listing states it is for centering work ends where the workpiece is revolved on machine centers.

How is a #2 center drill different from a #1 or a #3?

The sizes step up together: the #1 is 1/8 inch body by 3/64 inch pilot by 1-1/4 inch overall length, and the #3 is 1/4 inch body by 7/64 inch pilot by 2 inch overall length. The #2 sits between them at 3/16 inch body by 5/64 inch pilot by 1-7/8 inch overall length.

Is a self-centering hinge bit the same as a center drill?

No. Self-centering hinge bits, also called VIX bits, drill pilot holes for cabinet and door hinges on a 1/4 inch hex shank, in 3/32 inch, 7/64 inch and 1/8 inch for #6, #8 and #10 screws. A lathe center drill cuts a 60 degree center hole for work held between machine centers.

What steel are center drills made from?

The listings state M2 high speed steel, M35 cobalt HSS with 5% cobalt and a TiAlN coating, and M42 HSS with 8% cobalt, depending on the set. The toolant set adds a 118 degree split point, and the DKIBBITH listing states its bits cut material from 170HB up to 200HB.

Related: center drill bit sizes, HSS vs cobalt drill bit, best countersink bit cobalt, screw extractor set how to use, and the metal fab tools hub.

More buying guides