Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Strap Clamp and How to Choose the Right One

Band clamps for frames, hose clamps for pipe and duct, pipe strap clips for conduit and spring clamps for moldings: how the types differ and how to pick one.

Types of Strap Clamp and How to Choose the Right One
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Amarite Steel Plate Lifting Clamp 0.8 TonAmarite Steel Plate Lifting Clamp 0.8 Ton9.7/10View on Amazon
  2. 2GleamRad 11-Inch Locking C-Clamp PliersGleamRad 11-Inch Locking C-Clamp Pliers9.6/10View on Amazon
  3. 3HORUSDY 4-Pack 12-Inch Bar Clamp SetHORUSDY 4-Pack 12-Inch Bar Clamp Set9.6/10View on Amazon

A strap clamp holds the work with a band that pulls tight all round, a clip that pins it in place, or jaws that pinch it with one hand. The types of strap clamp split into four groups: the band clamp for frames, the hose clamp for pipe and duct, the pipe strap clip for conduit, and the spring clamp for moldings. Which one fits depends on what the strap has to hold and how the tension gets applied.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

The four types in one paragraph

A strap clamp is any clamp that holds the work with a band, a strap or a clip instead of pressing from two jaws. The four types here split by the job: a band clamp wraps frames and boxes, a hose clamp wraps pipe and duct, a pipe strap clip pins conduit to a wall, and a spring clamp pinches moldings and thin stock with one hand. The strap length, the material and the way the tension is applied are what separate them.

Types of strap clamp side by side

Band clamp Hose clamp Pipe strap clip Spring clamp
What it wraps Frames, boxes, barrels, cabinets Hoses, pipes, ducts, fuel lines PVC conduit on a wall Edge moldings, thin stock, cables
Strap or band Woven strap, 4 metres to 23 ft 304 stainless steel band, 12 ft to 32.81 ft PVC clip, no strap Spring jaws; rubber band on the Rockler
How it tightens Handle and tensioning unit Worm gear screw Screws through the clip One-handed squeeze
Corner help Corner blocks for 90° joints; Vario corners 60° to 180° None; the band follows the pipe None; the clip holds the pipe None; the clamp follows the molding contour
Strap lengths stated 4 metres, 13 ft, 23 ft 12 ft, 26 ft, 32.81 ft Not stated Not stated

Strap length is the first figure to check: the BESSEY band clamp states a 23 ft strap, the Feekoon states 13 ft, and the HORUSDY band clamp states a 4 metre strap. Hose clamp kits state the band as a roll to cut: 32.81 ft with 20 fasteners from SmaringWing, 26 ft with 15 fasteners from KintKita, and 12 ft with 8 fasteners from Dianrui. Pipe strap clips state no strap at all, and spring clamps state no strap length either.

When a band clamp is the right choice

  • Frames and boxes. A band clamp pulls even pressure around square, round and irregular shapes, which suits picture frames, drawers, chair frames, cabinets and barrels.
  • Corner joints. Corner blocks hold the joints at 90° while the glue sets; the BESSEY Vario corners adjust from 60° to 180° for angles that are not square.
  • Large work. Strap length sets the largest frame: 23 ft on the BESSEY, 13 ft on the Feekoon, 4 metres on the HORUSDY, with a take-up reel on the BESSEY to store the slack.
  • Quick release. The Feekoon quick-release system adjusts tension fast during glue-ups, and the HORUSDY handle tightens the strap through a tensioning unit.

When a hose clamp is the right choice

  • Pipe, duct and fuel line. Worm gear hose clamps suit hoses, ducts, fuel lines, air conditioner pipes, dryer vents and range hood pipes, indoors and out.
  • Odd sizes. Cut-to-fit kits let you trim the band to any length and fit a fastener, so one roll covers pipes of many sizes instead of a box of fixed clamps.
  • Stainless band. The kits here state 304 stainless steel for the band and fasteners, which the listings rate above 201 stainless for rust and corrosion resistance outdoors.
  • Minimum diameter. The KintKita kit (on Amazon) suits hoses with an inner diameter of 1 inch or more and tightens with a standard 5/16 inch hex driver.

Our adjustable metal band clamps guide covers cut-to-length kits for pipe and duct. See also our welding clamps guide for shop sets.

When a pipe strap clip is the right choice

  • Conduit runs. A pipe strap clip pins PVC conduit to a concrete wall, tile or wood panel and holds the run straight.
  • Matched size. The Soimuk clips (on Amazon) fit SCH 3/4 inch pipe, and the pack holds 10 clips with 20 screws, so check the pipe size before ordering.
  • Light and non-conductive. Each clip weighs about 0.1 oz, and the PVC body is non-conductive.
  • Pre-drill the holes. The maker suggests pre-drilling holes to keep the screws from breaking when driven in.

When a spring clamp is the right choice

  • Thin stock and moldings. Spring clamps suit thinner stock and delicate moldings, where a light grip holds the work without marring it.
  • One hand free. One squeeze opens the jaws, so the other hand stays on the work; the Rockler Bandy clamps (on Amazon) come as a 3-pair set for edging of many profiles.
  • Small parts and cables. The same squeeze clamps hold power cables, extension cords and pneumatic lines out of the way while you work.
  • Part of a set. The HORUSDY set pairs 4-inch spring clamps with 6-inch bar clamps rated to a 75 lbs load limit, so the spring clamps cover light holding and the bar clamps cover the heavier work.

See our quick clamp vs spring clamp guide for how the two one-handed styles compare.

How to tell what a listing gives you

Four figures tell you most of what you need before you order:

  • Strap length. Band clamps state 4 metres, 13 ft or 23 ft; hose kits state 12 ft, 26 ft or 32.81 ft of band to cut. Match the length to the largest frame or pipe you plan to wrap.
  • Fastener count. Hose kits state 8, 15 or 20 fasteners with the roll; each fastener makes one clamp, so the count sets the most clamps the roll can yield.
  • Material. Hose kits state 304 stainless steel; band clamps state woven polyester, woven canvas or nylon straps; pipe clips state PVC; spring clamps state nylon, with fiberglass fill on the Rockler.
  • Load limit. The HORUSDY bar clamp set states a 75 lbs load limit and a spreader reach of 9.72 inches; the other listings state no load figure, so judge them on strap and material alone.

Check the listing for a corner set too: the BESSEY ships with 4 pivoting Vario clips, the Feekoon with 4 corner claws, and the HORUSDY band clamp with corner braces that come off for irregular shapes. See our types of metal clamps and types of toggle clamps guides for the wider clamp family.

Strap tension and cut steel. A tight strap holds stored tension, so keep your face and hands clear of the strap line when you release it. Cutting a steel band leaves a sharp edge; wear safety glasses and gloves while you trim it, and fold the cut end over before you handle the roll again.

FAQ for welders

What is a strap clamp used for?

A strap clamp wraps a band around work that ordinary jaws cannot reach across, such as a picture frame, a drawer, a barrel or a cabinet. Band clamps suit frames and boxes, hose clamps suit pipe and duct, pipe strap clips suit conduit runs, and spring clamps suit moldings and thin stock.

How long a strap do I need for a picture frame?

The strap must wrap the frame with length left over for the tensioning unit. The listings here state 4 metres on the HORUSDY band clamp, 13 ft on the Feekoon and 23 ft on the BESSEY, so measure the frame and pick a strap longer than that figure.

Can I cut a hose clamp band to length?

Yes. The cut-to-fit kits state a roll of band and a set of fasteners: 32.81 ft with 20 fasteners, 26 ft with 15 fasteners, or 12 ft with 8 fasteners. Trim the band, fit a fastener, wrap it around the hose and tighten the screw.

What size pipe strap clip fits my conduit?

Match the clip to the pipe size. The Soimuk clips fit SCH 3/4 inch pipe, and the pack holds 10 clips with 20 screws. Check the pipe size before ordering, and pre-drill the holes so the screws do not break.

Are spring clamps strong enough for glue-ups?

Spring clamps suit thin stock and delicate moldings, where a light one-handed grip is enough. For a frame glue-up that needs even pressure all round, a band clamp with corner blocks fits better, and the HORUSDY set pairs 4-inch spring clamps with 6-inch bar clamps rated to 75 lbs for the heavier work.

Do strap clamps work on round work?

Yes. Band clamps suit square, round and irregular shapes, and the BESSEY Vario corners adjust from 60° to 180° to hold angles that are not square. Hose clamps wrap round pipe and duct by design, and the band follows the curve.

Related: types of metal clamps, bar clamp vs parallel clamp, adjustable metal band clamps, types of lifting clamps, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Types of Toggle Clamps for Fabrication

Horizontal and vertical hold-downs, pull-action latches and auto-adjust clamps compared by holding capacity, handle position and mounting, so you can pick the shape that…

Metal Fab Tools ·

Types of Lifting Clamps for Metal Work

Vertical clamps lift steel plate upright and multi-position clamps lift it flat, upright or sideways, and the 2 clamps here show how capacity, jaw…