Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Lifting Clamps for Metal Work

Vertical clamps lift steel plate upright and multi-position clamps lift it flat, upright or sideways, and the 2 clamps here show how capacity, jaw opening and locks differ.

Types of Lifting Clamps for Metal Work
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Amarite Steel Plate Lifting Clamp 0.8 TonAmarite Steel Plate Lifting Clamp 0.8 Ton9.7/10View on Amazon
  2. 2BEAMNOVA 2 Tons Vertical Plate Lifting ClampBEAMNOVA 2 Tons Vertical Plate Lifting Clamp9.6/10View on Amazon

A plate leaning against the bench needs to go up on the table, and the clamp decides whether it goes up straight or not at all. This guide covers the lifting clamp types shown below: vertical clamps lift plate upright, and multi-position clamps lift it flat, upright or sideways, and the clamp you pick has to match the plate’s weight and the position you lift it from.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Amarite Steel Plate Lifting Clamp 0.8 Ton

Amarite Steel Plate Lifting Clamp 0.8 Ton

Amarite9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A one-piece forged plate clamp that lifts steel plate vertical, horizontal or sideways, with a 180° swivel shackle, a pre-tension mechanism and a dual lock.

Pros

  • Lifts plate vertical, horizontal and sideways
  • One-piece forged alloy steel body
  • 180° swivel shackle
  • Dual lock for closed and open positions

Cons

  • 0.8 ton capacity is below the 2-ton BEAMNOVA
  • Suits only material with a surface hardness to 30 RC (300 HB)
  • No warranty term is stated
  • Minimum load of 10% of the maximum W.L.L. rules out very light plate
BEAMNOVA 2 Tons Vertical Plate Lifting Clamp

BEAMNOVA 2 Tons Vertical Plate Lifting Clamp

BEAMNOVA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-ton vertical plate clamp in alloy steel with an anti-rust coating, a non-rotating ring and a safety spring, with a jaw opening of 0 to 25 mm.

Pros

  • 2-ton capacity for heavy plate
  • Alloy steel with an anti-rust coating
  • Safety spring keeps the clamp from slipping
  • Non-rotating ring

Cons

  • Vertical lifting only
  • Chains are not included
  • 1 clamp per package
  • No warranty term is stated

Types of lifting clamps

The 2 clamps here fall into 2 kinds by the positions they lift from. A vertical clamp grips the top edge of the plate and lifts it upright, which suits plate that stands on edge for welding, cutting and handling. A multi-position clamp grips the plate and lifts it flat, upright or sideways, which suits plate that moves between a flat table and an upright fit-up. Both kinds lock on the plate with a jaw and a spring or lock, and both hang from a hoist, crane or chain by a ring or shackle.

Side by side

Gear Score Capacity Jaw opening Lift positions Lock and standard
Amarite Plate Lifting Clamp 9.7/10 0.8 ton (1760 lb) 0.6 in Vertical, horizontal, sideways Dual lock, EN 13155, ASME B30.20
BEAMNOVA Vertical Plate Clamp 9.6/10 2 tons 0 to 25 mm (1 in) Vertical Safety spring, non-rotating ring

The BEAMNOVA clamp (on Amazon) lifts more weight in one position, and the Amarite clamp (on Amazon) lifts less weight in more positions. Capacity decides the pick when the plate is heavy, and positions decide it when the plate moves flat and upright in the same job.

When a vertical clamp is the better choice

  • Heavy plate, upright. The BEAMNOVA clamp lifts plate up to 2 tons in the vertical position, which suits steel plate welding, cutting and handling on edge.
  • Simple lock. Pull the ring, set the plate, pull back the spring to lock, and the safety spring holds it while the load moves.
  • Harsh environment. Alloy steel with an anti-rust coating, made to withstand a harsh environment.

When a multi-position clamp is the better choice

  • Flat and upright in one job. The Amarite clamp lifts plate vertical, horizontal and sideways, so one clamp covers the table and the fit-up.
  • Swivel shackle. The 180° swivel shackle lets the clamp turn with the load.
  • Stated standards. GS certification, CE marking, and EN 13155 and ASME B30.20 compliance suit a shop that wants the standard in writing.

The clamps

Both clamps below handle the lift itself: the plate’s weight and the position you lift it from decide which one fits.

How to pick the right capacity

Match the clamp’s rated capacity to the plate, and never exceed it. The BEAMNOVA clamp is rated at 2 tons, and the Amarite clamp is rated at 0.8 ton (1760 lb). The Amarite clamp also states a minimum load of 10% of the maximum W.L.L., and a surface hardness limit of 30 RC (300 HB), so check the plate against both figures before you lift. Never lift over people.

FAQ for welders

What is a vertical lifting clamp?

A clamp that grips the top edge of a steel plate and lifts it upright. The BEAMNOVA clamp is a vertical clamp rated at 2 tons, with a jaw opening of 0 to 25 mm (1 in) and a safety spring that holds the plate while it moves.

Can one clamp lift plate flat and upright?

Yes, if the maker lists both positions. The Amarite clamp lifts plate vertical, horizontal and sideways, with a 180° swivel shackle. A vertical-only clamp like the BEAMNOVA suits upright lifts only.

How much weight can these lifting clamps hold?

The BEAMNOVA clamp is rated at 2 tons, and the Amarite clamp is rated at 0.8 ton (1760 lb). Match the rated capacity to the plate, and never exceed it.

What jaw opening do I need?

Match the opening to the plate thickness. The BEAMNOVA clamp opens from 0 to 25 mm (1 in), and the Amarite clamp has a 0.6 in jaw opening. Measure the plate before you order.

Do these clamps come with chains?

The BEAMNOVA package holds 1 clamp, and chains are not included. The Amarite listing names 1 item in the box and says nothing about chains.

Related: lever hoist vs chain hoist, types of metal clamps, best heavy-duty welding clamps, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Types of Toggle Clamps for Fabrication

Horizontal and vertical hold-downs, pull-action latches and auto-adjust clamps compared by holding capacity, handle position and mounting, so you can pick the shape that…

Metal Fab Tools ·

Types of Metal Clamps for Fabrication

Bar clamps and locking C-clamps explained for welding and metal fabrication, with jaw openings, throat depths and force ratings compared across the scored picks…