Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Lever Hoist vs Chain Hoist: Which One Should You Buy?

The Harrington LB Series lever hoist and the Amarite mini chain hoist are both rated lifting tools. Here is how they compare on capacity, lift height, weight, chain and build.

Lever Hoist vs Chain Hoist: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Harrington LB Series Steel Lever HoistHarrington LB Series Steel Lever Hoist9.6/10View on Amazon
  2. 2Amarite Mini Chain Come Along, 1/2 Ton/1100 lbsAmarite Mini Chain Come Along, 1/2 Ton/1100 lbs9.6/10View on Amazon

Verdict. The Harrington lever hoist is the steel tool for heavy pulls, with a lever that gives a short, controlled pull. The Amarite chain hoist is the lighter carry for smaller lifts around the shop, with a hand chain and a rotating hook. Pick the lever hoist when the load is heavy and the pull is short; pick the chain hoist when the hoist moves between jobs and the loads are lighter.

A stuck press and a motor that will not move by hand are the shop jobs behind this lever hoist vs chain hoist comparison, which puts the Harrington LB Series lever hoist against the Amarite mini chain hoist on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The hoists

Harrington LB Series Steel Lever Hoist

Harrington LB Series Steel Lever Hoist

HARRINGTON9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1-1/2 ton lever hoist with a 15 ft lift, a 10.4 inch lever, a Weston-style load brake and an all-steel build.

Pros

  • Rated at 1-1/2 ton with a 15 ft lift height
  • Weston-style load brake with 2 moisture-resistant brake pads and four braking surfaces
  • All-steel construction with an enclosed brake mechanism
  • Spring-loaded freewheel mechanism with a rubber grip for non-slip operation

Cons

  • 26.81 pounds, heavy to carry between jobs
  • 13.2 inch headroom takes clearance above the load
  • 10.4 inch lever needs room to swing
  • No warranty term is stated
Amarite Mini Chain Come Along, 1/2 Ton/1100 lbs

Amarite Mini Chain Come Along, 1/2 Ton/1100 lbs

Amarite9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1100 lbs chain hoist with a 10 ft lift, a G80 chain, a 360 rotating hook and an aluminum alloy body.

Pros

  • Rated at 1100 lbs with a 10 ft lift height
  • 7.3 pounds with an aluminum alloy body, light to carry
  • G80 chain with a 360 rotating hook
  • CE certified and EN 13157 compliant

Cons

  • 10 ft lift height is shorter than the 15 ft lift of the Harrington example
  • Aluminum alloy body where the lever hoist example is all steel
  • No warranty term is stated
  • Hand chain operation with no lever handle

Other welders and gear to compare

Side by side

Harrington LB Series Lever Hoist Amarite Mini Chain Come Along Notes
Rated capacity 1-1/2 ton 1100 lbs Each rating applies to that hoist only
Lift height 15 ft 10 ft Longer lift on the lever hoist example
Lever and chain 10.4 inch lever G80 chain Lever pull against hand chain
Hook opening 1.3 inches Not stated Opening stated for the lever hoist only
Weight 26.81 pounds 7.3 pounds The chain hoist example is the lighter carry
Build All steel Aluminum alloy body Steel against alloy
Brake and standard Weston-style load brake CE, EN 13157 Brake mechanism against stated standards
Headroom 13.2 inches Not stated Clearance stated for the lever hoist only
Warranty Not stated Not stated Neither listing states a term

All specs here repeat what the maker rates and the listing prints, copied down 14 November 2026. Neither listing states a warranty term.

Rated capacity in lever hoist vs chain hoist

The Harrington lever hoist is rated at 1-1/2 ton. The Amarite chain hoist is rated at 1100 lbs. The listings state the ratings in different units, so each rating stands as the maker lists it, and the rated capacity of each hoist is the limit for that hoist. Never exceed the rated capacity, and never lift a load over people.

Lift height and chain

The Harrington lever hoist lists a 15 ft lift height. The Amarite chain hoist lists a 10 ft lift height. On lift height alone, the lever hoist example reaches farther, since the listings state the heights in the same unit. The Amarite example pairs its lift with a G80 chain the maker rates at 800 MPa, with a forging type hook. The Harrington example lists a load chain with a spring-loaded freewheel mechanism that permits easy adjustment of the load chain and guards against accidental freewheeling under load.

Lever action and hand chain

The Harrington example works by lever: a 10.4 inch lever with a rubber grip for non-slip operation. The Amarite example works by hand chain, with a 360 rotating hook that turns to meet the load. A lever gives a short pull per stroke and suits pulling a load toward its anchor point; a hand chain suits a steady lift where the operator stands clear of the load. Neither listing states a pull force, so the listings leave that unclear.

Weight and build

The Harrington lever hoist weighs 26.81 pounds, with an all-steel build and dimensions of 13.5 by 7.0 by 5.5 inches. The Amarite chain hoist weighs 7.3 pounds, with an aluminum alloy body. The chain hoist example is the lighter carry by a wide margin, and the lever hoist example is the heavier tool of the two. The Harrington example uses machined, heat-treated, split load double reduction gears behind a totally enclosed brake mechanism. The Amarite example lists parts forged in one piece.

Hooks and handling

The Harrington example lists a 1.3 inch opening and a 13.2 inch headroom. The Amarite example lists a large opening size with a 360 rotating hook, without a stated measurement. The lever hoist example gives a rubber grip on the lever; the chain hoist example gives a forging type hook. Check the hook and the chain on arrival, and confirm the opening fits the anchor point before rigging.

Warranty

Neither listing states a warranty term. A buyer who wants a written warranty should ask the seller before ordering.

Choose the Harrington LB Series Lever Hoist if

  • Your loads call for the 1-1/2 ton rating.
  • You want a 15 ft lift height from a lever hoist.
  • An all-steel build with an enclosed brake mechanism matters to you.
  • The hoist stays rigged in a fixed spot.

Choose the Amarite Mini Chain Come Along if

  • Your loads fit the 1100 lbs rating.
  • You carry the hoist between jobs at 7.3 pounds.
  • A 10 ft lift height covers the job.
  • A 360 rotating hook suits the rigging.

Before You Strike an Arc

  • Check the rated capacity on the hoist against the load, and never exceed it.
  • Inspect the chain and the hook for wear before rigging.
  • Confirm the anchor point fits the hook opening and holds the load.
  • Keep clear of the load path, and never lift a load over people.
  • Wear eye protection and gloves suited to the job, and keep the work area clear.

FAQ for welders

Which hoist should a shop pick for heavy loads?

The Harrington lever hoist is rated at 1-1/2 ton, and the Amarite chain hoist is rated at 1100 lbs. Match the rated capacity to the load, and never exceed the rating on the hoist in hand.

How high can each hoist lift?

The Harrington lever hoist lists a 15 ft lift height, and the Amarite chain hoist lists a 10 ft lift height. Measure the lift the job needs before ordering, and confirm the height covers the full travel.

Which hoist is easier to carry?

The Amarite chain hoist weighs 7.3 pounds with an aluminum alloy body. The Harrington lever hoist weighs 26.81 pounds with an all-steel build. The chain hoist example is the lighter carry between jobs.

Can a lever hoist or a chain hoist lift a load over people?

No. Never lift a load over people, and never exceed the rated capacity of the hoist. Keep clear of the load path while lifting.

What standard does the Amarite chain hoist meet?

The Amarite listing states CE certification and EN 13157 compliance, with a G80 chain.

Related: hand truck vs dolly and steel workbench vs welding table. Also see our come along vs winch. Also see our best folding hand truck dolly. Also see our best lever chain hoist. Also see our electric hoist portable. Also see our electric hoist trolley.

More related guides (13)

Scoring, line by line

Both hoists are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Harrington LB Series Lever Hoist 9.6 30 21 20 7 0
Amarite Mini Chain Come Along 9.6 28 20 21 8 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More buying guides

Hoists and Lifting ·

Best Lever Chain Hoist (2026)

5 lever chain hoists for shop and farm work, compared by rated capacity, lift, chain, brake, weight and warranty.