Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Lifting Eye Nut (2026): 5 Picks Compared

Five lifting eye nuts for the shop, compared on thread size, working load limit, material, pack size and corrosion resistance.

Best Lifting Eye Nut (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Frienda 5/8 in 316 StainlessBest OverallFrienda 5/8 in 316 Stainless9.7/10View on Amazon
  2. 2Lounsweer 1/2-13 GalvanizedBest 1/2 Inch PickLounsweer 1/2-13 Galvanized9.6/10View on Amazon
  3. 3QWORK 1/4 in 316 20 PackMost PiecesQWORK 1/4 in 316 20 Pack9.6/10View on Amazon
  4. 4QWORK 1/4 in 316 10 PackBest 1/4 Inch 10 PackQWORK 1/4 in 316 10 Pack9.5/10View on Amazon

A beam needs a hook point, a plate needs to hang level, a motor needs to come out of a frame. The lift starts with a threaded eye that matches the bolt under it. This guide compares the best lifting eye nut picks for shop rigging, on what each listing states: thread size, working load limit, material and pack size.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Frienda 5/8 in 316 Stainless: A stated 3600 lb working load limit, a 5/8 inch thread and marine grade 316 stainless steel, with clear capacity markings. Check price on Amazon
  • Best 1/2 Inch Pick Lounsweer 1/2-13 Galvanized: A stated 2250 lb working load limit in drop forged, hot dip galvanized carbon steel, 10 pieces in the pack. Check price on Amazon
  • Most Pieces QWORK 1/4 in 316 20 Pack: 20 pieces of 1/4 inch 316 stainless steel for rigging jobs that need a lot of small eye nuts. Check price on Amazon
  • Best 1/4 Inch 10 Pack QWORK 1/4 in 316 10 Pack: 10 pieces of 1/4 inch 316 stainless steel for construction, engineering and rigging work. Check price on Amazon

The machines

Frienda 2 Pack 5/8" UNC Lifting Eye Nut

Frienda 2 Pack 5/8" UNC Lifting Eye Nut

Frienda9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5/8 inch eye nut in marine grade 316 stainless steel with a stated 3600 lb working load limit and clear capacity markings, in a 2 pack.

Pros

  • Highest stated working load limit here, 3600 lb
  • Marine grade 316 stainless steel for saltwater and outdoor use
  • Clear capacity markings to prevent overloads
  • 5/8 inch coarse thread with a stated pitch of 16

Cons

  • Only 2 pieces in the pack
  • 5/8 inch thread fits only matching 5/8 inch bolts or studs
  • Smallest stated dimensions here, 1.18 x 0.79 x 0.59 inches
  • No warranty term is stated
Lounsweer 10 Pcs 1/2"-13 Heavy Duty Lifting Eye

Lounsweer 10 Pcs 1/2"-13 Heavy Duty Lifting Eye

Lounsweer9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/2-13 eye nut in drop forged, hot dip galvanized carbon steel with a stated 2250 lb working load limit, in a pack of 10.

Pros

  • Stated 2250 lb working load limit
  • Drop forged carbon steel with a hot dip galvanized coating
  • 10 pieces in the pack for daily use and replacement
  • Reusable ring shape, easy to install and remove

Cons

  • Carbon steel, not stainless steel, so the galvanized coating does the corrosion work
  • Largest stated dimensions here, 3.15 x 2.56 x 1.18 inches
  • 10 pieces may be more than a single small job needs
  • 1/2-13 thread fits only matching 1/2 inch bolts or studs
QWORK Marine Grade Stainless Steel 316 Lifting Eye

QWORK Marine Grade Stainless Steel 316 Lifting Eye

QWORK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20 pack of 1/4 inch eye nuts in marine grade 316 stainless steel, the most pieces in this guide.

Pros

  • Marine grade 316 stainless steel
  • 20 pieces in the pack, the most here
  • Corrosion resistance for harsh environments
  • 1/4 inch UNC thread for a wide range of lifting machinery

Cons

  • No working load limit is stated
  • 1/4 inch thread suits only small bolts and studs
  • No dimensions are stated
  • 20 pieces is more than a single lift point needs
QWORK Lifting Eye Nut, 10 Pack

QWORK Lifting Eye Nut, 10 Pack

QWORK9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 1/4 inch eye nuts in marine grade 316 stainless steel, for construction, engineering and rigging work.

Pros

  • Marine grade 316 stainless steel
  • 10 pieces in the pack
  • Corrosion resistance for harsh environments
  • 1/4 inch UNC thread for a wide range of lifting machinery

Cons

  • No working load limit is stated
  • 1/4 inch thread suits only small bolts and studs
  • No dimensions are stated
  • 10 pieces may be more than a single small job needs
1/2"-13 Lifting Eye Nuts

1/2"-13 Lifting Eye Nuts

JIT Fastener9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/2-13 eye nut in drop forged galvanized C15 carbon steel with a stated 308 lb working load limit, in a pack of 2.

Pros

  • Drop forged galvanized C15 carbon steel
  • Stated 308 lb working load limit, 140 kg
  • UNC standard thread, not metric
  • Galvanized coating the maker lists as corrosion resistant and rust-proof

Cons

  • Lowest stated working load limit here, 308 lb
  • Only 2 pieces in the pack
  • 1/2-13 thread fits only matching 1/2 inch bolts or studs
  • No warranty term is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Thread size Working load limit Material Pack size Warranty
Frienda 5/8 in 316 Stainless 9.7/10 5/8 in UNC 3600 lb 316 stainless steel 2 Not stated
Lounsweer 1/2-13 Galvanized 9.6/10 1/2-13 UNC 2250 lb Carbon steel, hot dip galvanized 10 Not stated
QWORK 1/4 in 316 20 Pack 9.6/10 1/4 in UNC Not stated 316 stainless steel 20 Not stated
QWORK 1/4 in 316 10 Pack 9.5/10 1/4 in UNC Not stated 316 stainless steel 10 Not stated
JIT 1/2-13 Galvanized 9.4/10 1/2-13 UNC 308 lb C15 carbon steel, galvanized 2 Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 20 November 2026.

Buying guide: choosing the best lifting eye nut

Thread size

Match the thread to the bolt or stud the nut screws onto. These picks come in 1/4 inch, 1/2-13 and 5/8 inch thread, all UNC standard. A 1/4 inch nut fits small bolts and studs, while the 5/8 inch Frienda fits the largest bolts here. Check the bolt size before ordering.

Working load limit

The working load limit decides whether a nut can take the lift. The Frienda is rated at 3600 lb, the Lounsweer at 2250 lb and the JIT at 308 lb. The two QWORK nuts state no working load limit, so they cannot be matched to a rated lift. Never exceed the stated limit, and never lift over people.

Material

Three nuts here are marine grade 316 stainless steel: the Frienda and both QWORK packs. The maker lists 316 stainless for corrosion resistance in harsh environments, and the Frienda listing adds saltwater and outdoor use. The Lounsweer and JIT are galvanized carbon steel, drop forged, with a coating the maker lists as corrosion resistant.

Pack size

Packs here run from 2 pieces to 20 pieces. A 2 pack covers a single lift point or a symmetrical pair of tie downs. The 10 piece Lounsweer pack covers several lift points and leaves spares. The 20 piece QWORK pack suits a shop that needs many small eye nuts on hand.

Use as directed. Never exceed the stated working load limit, and never lift over people. Check the thread size and fit before lifting, and check the eye nut for damaged threads on arrival. See our Safety Disclaimer.

Before You Strike an Arc

  • Match the thread to the bolt or stud: 1/4 inch, 1/2-13 or 5/8 inch, all UNC standard.
  • Check the working load limit: 3600 lb on the Frienda, 2250 lb on the Lounsweer, 308 lb on the JIT.
  • Check the eye nut seats fully on the stud before the lift.
  • Count the pack on arrival: 2, 10 or 20 pieces.

FAQ for welders

How often does lifting equipment need to be certified?

These listings state no certification interval. Follow the rules for your workplace and keep a record of inspections and rated capacities.

What is a lifting gear register?

A lifting gear register is a record of the lifting gear in use. It lists the rated capacity and inspection history of each item.

What size lifting eye nut do I need?

Match the thread to the bolt or stud it screws onto. These picks come in 1/4 inch, 1/2-13 and 5/8 inch thread, so check the bolt size before ordering. A nut that does not match the thread will not seat.

Can I lift more than the working load limit?

No. Never exceed the working load limit the maker states. The Frienda is rated at 3600 lb, the Lounsweer at 2250 lb and the JIT at 308 lb. The two QWORK nuts state no working load limit, so do not use them for a lift that needs a rated capacity.

Does stainless steel resist rust better than galvanized steel?

The maker lists 316 stainless steel for corrosion resistance in harsh environments, and the Frienda listing adds saltwater and outdoor use. Galvanized steel carries a coating the maker lists as corrosion resistant and rust-proof.

Related: manual chain hoist, best lifting slings, types of lifting clamps, and the lifting and pressing hub.

Scoring, line by line

Each eye nut is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states a safety certification or a warranty term, so every eye nut scores zero on those two; the ranking comes from the other three.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Frienda 5/8 in 316 Stainless 9.7 32 22 21 n/a 0
Lounsweer 1/2-13 Galvanized 9.6 30 21 21 n/a 0
QWORK 1/4 in 316 20 Pack 9.6 26 21 21 n/a 0
QWORK 1/4 in 316 10 Pack 9.5 26 21 20 n/a 0
JIT 1/2-13 Galvanized 9.4 23 20 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Hoists and Lifting ·

Best Lifting Winch (2026): 5 Picks Compared

Five lifting winches from 1100 to 2000 lb, compared on capacity, lift height, power, control, safety and the warranty each listing states.