Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Industrial Lifting Magnets (2026): 4 Picks, 440 to 3300 lb

Four permanent lifting magnets for shop cranes and hoists, compared on rated capacity, safety factor, release handle, groove shape and stated weight.

Best Industrial Lifting Magnets (2026): 4 Picks, 440 to 3300 lb
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR PML-1500 3300 lbStrongest CapacityVEVOR PML-1500 3300 lb9.6/10View on Amazon
  2. 2VEVOR PML-400 880 lbBest All-RoundVEVOR PML-400 880 lb9.6/10View on Amazon
  3. 3JUSTHERE 440 lbSmallest Dedicated LifterJUSTHERE 440 lb9.5/10View on Amazon
  4. 4Magnetpro MSW-300TSwitch MagnetMagnetpro MSW-300T9.4/10View on Amazon

Moving plate steel across the shop by hand is slow work, and a sling around a flat sheet is awkward at best. The best industrial lifting magnets in this guide are permanent lifters that grip the plate, let a hoist or shop crane carry it, and release with a turn of the handle. This guide compares the permanent lifters below on rated capacity, safety factor, release handle, groove shape and stated weight, using only what each maker states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Strongest Capacity VEVOR PML-1500 3300 lb: Rated at 3300 lb with a 2.5 safety factor, a safety handle, a limit bolt and a U-shaped groove for flat plate and round steel. Check price on Amazon
  • Best All-Round VEVOR PML-400 880 lb: Rated at 880 lb with a 2.5 safety factor, the same safety handle and groove as the larger VEVOR, at 20.3 lb. Check price on Amazon
  • Smallest Dedicated Lifter JUSTHERE 440 lb: Rated at 440 lb with N42 magnets, a safety handle and a U-shaped groove for plate and round steel. Check price on Amazon
  • Switch Magnet Magnetpro MSW-300T: A 660 lb pull-off switch magnet with a 220 lb lifting rating, all-metal parts and an ON/OFF switch for positioning work. Check price on Amazon

The machines

VEVOR Magnetic Lifter, 3300lbs/1500kg Pulling

VEVOR Magnetic Lifter, 3300lbs/1500kg Pulling

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The strongest lifter here, rated at 3300 lb with a 2.5 safety factor, a safety handle, a chrome-plated hook and a U-shaped groove for flat plate and round steel.

Pros

  • Rated at 3300 lb, the highest capacity here, with a 2.5 safety factor
  • Safety switch, anti-collision handle and limit bolt guard against accidental switching
  • U-shaped groove fits flat plate and round steel
  • Chrome-plated hook in high-strength steel, with a rubber-wrapped handle

Cons

  • Weighs 81.6 lb, the heaviest lifter here, so it needs a hoist to move
  • Largest body here at 11.8 by 5.5 by 5.2 inches, so it needs clear space around the load
  • Far more capacity than light sheet work needs
  • Lifts magnetic steel only, not aluminum or other non-magnetic plate
VEVOR Magnetic Lifter, 880 lbs/400 kg Pulling

VEVOR Magnetic Lifter, 880 lbs/400 kg Pulling

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mid-capacity lifter rated at 880 lb with a 2.5 safety factor, the same safety handle and U-shaped groove as the larger VEVOR, at 20.3 lb.

Pros

  • Rated at 880 lb with a 2.5 safety factor
  • Safety switch, anti-collision handle and limit bolt guard against accidental switching
  • U-shaped groove fits flat plate and round steel
  • At 20.3 lb, the lighter of the two VEVOR lifters

Cons

  • Rated at 880 lb, well below the 3300 lb pick for the heaviest plate
  • At 20.3 lb it is still heavy to carry by hand to the work
  • Needs a hoist or shop crane to use
  • No warranty term is stated
440 lb/200kg Magnetic Lifter

440 lb/200kg Magnetic Lifter

JUSTHERE9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The smallest dedicated lifter here, rated at 440 lb with N42 magnets, a safety handle and a U-shaped groove for plate and round steel.

Pros

  • Rated at 440 lb, a fair capacity for lighter plate and board work
  • N42 neodymium magnets, the same grade as the VEVOR lifters
  • Safety switch and anti-collision handle with a rubber-wrapped grip
  • U-shaped groove fits flat plate and round steel

Cons

  • Lowest rated capacity of the dedicated lifters here at 440 lb
  • No safety factor is stated, while both VEVOR lifters state 2.5
  • Needs a shop crane or hoist to use
  • No warranty term is stated
Magnetpro Multipurpose Switch Magnet 660 LB

Magnetpro Multipurpose Switch Magnet 660 LB

Magnetpro9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A switch magnet rated at 660 lb pull-off force and 220 lb lifting weight, with an ON/OFF switch and all-metal parts for lifting, welding positioning and automation.

Pros

  • Rated pull-off force of 660 lb with a 220 lb rated safety lifting weight
  • ON/OFF switch, and the magnet is completely non-magnetic when OFF
  • All-metal parts: aluminum alloy handle and cover, SUS304 shaft, low-carbon steel base
  • Oil-sealed internals, so it can be used in water

Cons

  • Rated safety lifting weight of 220 lb is the lowest lifting rating here
  • Thin steel or a large surface lowers suction, so check the steel before lifting
  • The handle takes force to turn until the base touches the iron
  • A multipurpose switch magnet, not a dedicated heavy lifter

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Rated capacity Safety factor Release Item weight Warranty
VEVOR PML-1500 3300 lb 9.6/10 3300 lb 2.5 Handle with safety switch 81.6 lb Not stated
VEVOR PML-400 880 lb 9.6/10 880 lb 2.5 Handle with safety switch 20.3 lb Not stated
JUSTHERE 440 lb 9.5/10 440 lb Not stated Handle with safety switch Not stated Not stated
Magnetpro MSW-300T 9.4/10 220 lb lifting Not stated ON/OFF switch Not stated Not stated

Specifications are manufacturer rated, as published by each maker and collected 20 November 2026.

Buying guide: how to choose the best industrial lifting magnets

Rated capacity

Capacity is the first number to match to the load. The dedicated lifters here are rated at 440 lb, 880 lb and 3300 lb, while the Magnetpro switch magnet carries a 220 lb rated safety lifting weight beside a 660 lb rated pull-off force. Judge a lifter by the lifting weight, not the pull-off force, and never lift more than the rated capacity. The two VEVOR lifters also state a 2.5 safety factor.

Release handle and safety switch

A permanent lifter holds until the handle turns it off. On the VEVOR and JUSTHERE lifters, turn the handle left to switch the suction on and right to switch it off, and press the safety switch before the handle turns, so the magnet cannot switch on by accident. The VEVOR lifters add a limit bolt that fixes the handle in place. The Magnetpro switch magnet works differently: it has ON and OFF gears, and the handle needs a press down before it rotates. The magnet is completely non-magnetic when OFF, so the load and any chips fall away on their own.

Flat plate or round stock

The VEVOR and JUSTHERE lifters state a U-shaped groove in the base that fits flat plate and round steel, so one lifter covers both shapes. The Magnetpro switch magnet states no groove, and its flat base suits flat steel and positioning work such as welding, automation and metal separation. Check the stock shape against the groove before ordering.

The weight of the lifter itself

A heavy lifter needs a hoist to move, while a light one can be carried to the work. The VEVOR 3300 lb lifter weighs 81.6 lb, the heaviest here, and the VEVOR 880 lb lifter weighs 20.3 lb. The JUSTHERE and Magnetpro makers state no item weight, so compare those two on capacity and size instead. Match the lifter weight to the hoist that will carry it.

Use as directed. Never exceed the rated capacity, and never lift a load over people. Check that the magnet seats flat on the steel before the hoist takes the weight, and keep hands clear while the load moves. The Magnetpro maker warns that thin steel lowers suction, so check the steel thickness and surface before lifting. See the guide to manual chain hoists for the hoist end of the lift.

Before You Strike an Arc

  • Match the rated capacity to the heaviest plate on the job, and never exceed the rating the maker states.
  • Check the handle, safety switch and limit bolt move freely before the first lift.
  • Check the U-shaped groove fits the stock, flat plate or round steel, as the maker states.
  • Check the steel thickness before lifting, since thin steel lowers suction.
  • Confirm the lifter size and hook fit the hoist before ordering.

FAQ for welders

What size lifting magnet do I need?

Match the rated capacity to the heaviest plate you lift. The dedicated lifters here are rated at 440 lb, 880 lb and 3300 lb, and the switch magnet is rated at 220 lb for lifting. Pick the rating that covers the heaviest plate, and never exceed the rating the maker states.

Can a lifting magnet hold round stock?

Yes, when the lifter states a groove for it. Both VEVOR lifters and the JUSTHERE lifter state a U-shaped groove that fits flat plate and round steel. The Magnetpro switch magnet states no groove, so it suits flat steel and positioning work.

How do you switch a permanent lifting magnet off?

Turn the handle right to release the suction and left to switch it on, as the VEVOR and JUSTHERE makers state. Press the safety switch before the handle turns. The Magnetpro switch magnet has ON and OFF gears: press down before rotating, and the magnet is completely non-magnetic when OFF, so the load falls away on its own.

What is the difference between pull-off force and lifting weight?

Pull-off force is the force needed to pull the magnet straight off the steel, while the lifting weight is the load the maker rates it to carry. The Magnetpro states a 660 lb pull-off force and a 220 lb rated safety lifting weight. Judge a lifter by the lifting weight, not the pull-off force.

Can I lift a load over people with a lifting magnet?

No. Never lift a load over people, and never exceed the rated capacity. Keep the load low, keep hands clear, and check that the magnet seats flat on the steel before the hoist takes the weight.

Related: lifting and pressing, best light duty electric hoist, best lifting slings, manual chain hoist, and electric hoist vs chain hoist. Also see our types of lifting clamps. Also see our best shop crane electric. Also see our welding magnets with on off switch. Also see our best welding magnets for beginners.

Scoring, line by line

Each lifter is scored on performance, build, value, safety features and warranty, with the weights published on the How We Pick page. No maker here states a warranty term, so every lifter scores zero on warranty, and the ranking comes from the other criteria. Safety scores come from the safety features each maker states, such as the safety switch on the handle and the limit bolt.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VEVOR PML-1500 3300 lb 9.6 32 21 20 8 0
VEVOR PML-400 880 lb 9.6 29 21 21 8 0
JUSTHERE 440 lb 9.5 26 20 21 7 0
Magnetpro MSW-300T 9.4 23 20 19 7 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More buying guides