Best Welding Magnets for Beginners (2026): 5 Shop Picks Scored
Five magnetic welding squares and positioners compared on pull force, preset angles, switchable release, pack count, and what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallYESWELDER SWM-M9.6/10View on Amazon - 2
Best for TubingStrong Hand Tools MVDF449.6/10View on Amazon - 3
Best Light-Duty 4-PackGUTIMORE 25LB-4P9.4/10View on Amazon - 4
Best Mini MagnetsHobart 7706629.4/10View on Amazon
When you are fitting up square tubing for a cart or tacking flat bar at 90 degrees, holding pieces steady with one hand while dropping your helmet with the other leads to crooked joints and arc strikes. The best welding magnets for beginners serve as an extra helper at your bench, holding steel at clean angles so you can tack accurately before laying your bead. This guide compares five welding magnet sets on pull force, preset angles, switchable release, and stated specs to help you pick the right fit for your shop.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall YESWELDER SWM-M: An on/off switchable magnetic field that releases metal shavings easily, holds at 45, 90, and 135 degrees, and lists 66 to 110 lb holding force. Check price on Amazon
- Best for Tubing Strong Hand Tools MVDF44: A 4-piece V-Pad kit with magnets on the face and bottom, holding round, flat, and square parts with two 12 lb and two 18 lb pull pads. Check price on Amazon
- Best Light-Duty 4-Pack GUTIMORE 25LB-4P: Four arrow-shaped 25 lb holding magnets supporting 45, 90, and 135 degree joint fit-ups for light fab assemblies. Check price on Amazon
- Best Mini Magnets Hobart 770662: A 4-pack of compact multi-angle mini magnets from an established welding brand for tacking joints at 45, 90, and 135 degrees. Check price on Amazon
The machines

YESWELDER Switchable Arrow Welding Magnet
An arrow-shaped welding magnet with a mechanical on/off switch to release steel work and wipe away grinding grit easily.
Pros
- On/off switch activates and deactivates magnetic pull for easy positioning and cleaning
- Holds joint fit-ups at 45, 90, and 135 degree angles
- Stated dimensions of 6.3 x 4.25 x 0.82 inches with iron construction
- Strong holding power listed between 66 lb and 110 lb
Cons
- Pack contains only 1 piece, unlike the 4-piece kits compared here
- Mechanical switch mechanism adds moving components that require care around heavy spatter
- No warranty term is stated

Strong Hand Tools MagHold Magnetic V-Pad Kit
A 4-piece magnetic V-Pad kit with magnets on both the face and bottom, designed to hold round pipe, square tubing, and flat stock in tight spots.
Pros
- Includes 2 small 12 lb pads (XDV4) and 2 medium 18 lb pads (XFV4)
- Magnets on both pad face and bottom for two-sided magnetic holding
- V-groove profile securely holds round, square, and flat metal stock
- Complete 4-piece kit weighs just 0.9 lb for light-duty positioning
Cons
- Pull force topped at 18 lb, unsuitable for heavy plate or structural beams
- Maker warns that prolonged exposure to high heat can weaken the magnets
- No warranty term is stated

GUTIMORE 25LB Welding Magnet,Pack of 4
A 4-pack of classic arrow-shaped welding magnets rated at 25 lb holding force for 45, 90, and 135 degree joint alignment.
Pros
- Pack of 4 pieces provides enough magnets to square an entire frame
- 25 lb holding force per magnet holds light-duty sheet and tube securely
- Provides 45, 90, and 135 degree positioning angles
- Arrow design enables fast placement on ferrous materials
Cons
- 25 lb holding force can shift under heavy structural steel pieces
- Item dimensions and weight are not stated in the listing
- No warranty term is stated

Hobart 770662 Mini Magnetic Welding Holder Set
A 4-pack of compact mini welding magnets from an established brand, designed for tacking small parts at 45, 90, and 135 degrees.
Pros
- Pack of 4 mini magnets from established brand Hobart
- Holds steel workpieces at 45, 90, and 135 degree angles
- Compact package weight of 0.94 lb and item weight of 12.3 ounces
- Mini footprint fits into tight joints where full-size magnets do not fit
Cons
- Pull force rating is not stated in the listing
- Small size limits holding capacity on thicker, longer workpieces
- No warranty term is stated

110 LB Welding Magnets Clamp Sets-4 Pieces
A 4-piece set of arrow-shaped ferrite welding magnets claiming 110 lb of holding power for 45, 90, and 135 degree joint setups.
Pros
- Heavy 110 lb holding power rating per magnet
- Pack of 4 pieces provides four-point clamping coverage
- Supports 45, 90, and 135 degree positioning angles
- Ferrite magnet material embedded in heavy-duty casing
Cons
- Product dimensions and weight are not stated in the listing
- No warranty term is stated
Other welders and gear to compare
Strong Hand Welding MagnetCheck price on Amazon
Magnetpro Multipurpose Switch Magnet 220 LB Pull-Off ForceCheck price on Amazon
YESWELDER 25 lb and 50 lb Welding Magnet-4 Pc of WeldingCheck price on Amazon
TOOLIOM Arrow Welding MagnetsCheck price on Amazon
TOOLIOM Arrow Welding Magnet SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Pull force | Pack size | Angles | On/off switch | Warranty |
|---|---|---|---|---|---|---|
| YESWELDER SWM-M | 9.6/10 | 66-110 lb | 1 piece | 45, 90, 135 deg | Yes | Not stated |
| Strong Hand Tools MVDF44 | 9.6/10 | 12 lb and 18 lb | 4 pieces | V-Pad (round, flat, square) | No | Not stated |
| GUTIMORE 25LB-4P | 9.4/10 | 25 lb | 4 pieces | 45, 90, 135 deg | No | Not stated |
| Hobart 770662 | 9.4/10 | Not stated | 4 pieces | 45, 90, 135 deg | No | Not stated |
| KEWANQI KWQ2-4M-FBA | 9.3/10 | 110 lb | 4 pieces | 45, 90, 135 deg | No | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 9 October 2026.
Buying guide: best welding magnets for beginners
Holding force and magnet strength
Pull force indicates how much resistance a magnet provides before releasing from flat steel. The picks here range from 12 lb and 18 lb pads up to 110 lb heavy holders. Lighter ratings around 25 lb work well for thin tubing and small brackets because you can pry them loose by hand without disturbing your fit-up. Heavy magnets rated at 110 lb keep larger assemblies rigid, but pulling them off requires deliberate leverage.
Preset angles and body shape
Standard arrow-shaped magnetic welding squares feature fixed edges at 45, 90, and 135 degrees. These three angles handle the vast majority of shop projects, including picture-frame corner joints and diagonal bracing. For round pipe or square stock in confined assemblies, specialized V-pads seat against curved walls where flat arrow plates rock out of alignment.
Switchable on-off magnets vs fixed magnets
Fixed magnets are solid and ready to place, but their magnetic field remains permanently active. That means they attract grinding dust, mill scale, and metal filings whenever they sit on the bench. Switchable models feature a mechanical dial that turns the magnetic field on or off. Turning the knob releases metal debris instantly and lets you slide the tool into position before engaging the hold.
Working on a steel table
Using magnetic positioners on a steel workbench keeps both your workpiece and your fixturing anchored. When setting up magnetic squares on a fabrication surface, considering how thick should a welding table top be helps ensure your bench provides enough steel mass for strong magnetic adhesion without flexing under clamp pressure.
Use as directed. Keep magnets away from intense arc heat, as prolonged high temperature degrades magnetic holding force permanently. Watch your fingers during setup; strong magnets can pinch skin when snapping against steel. Position your ground clamp directly to bare metal on your workpiece rather than running welding current through the magnet body. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check magnet faces on arrival for burrs, metal grit, or loose rivets that could tilt your workpiece out of square.
- For switchable magnets, cycle the mechanical on-off rotary dial to confirm the magnetic field engages and releases smoothly before positioning parts.
- Wipe all mill scale, grinding dust, and cutting oil from your steel contact surfaces so the magnet seats flush against bare metal.
- Place your tack welds a short distance away from the magnet body so direct arc heat does not soak into the casing and weaken the permanent magnets.
FAQ for welders
Do welding magnets affect the arc?
Yes, strong magnetic fields close to the joint can pull the welding arc off target, a condition known as arc blow. Tack your joint a short distance from the magnet, or use the magnet only to establish the fit-up and remove it before running your full bead. Once tacks are set, the pieces will not move.
Why does my welding magnet lose its strength?
Excessive heat is the most common reason permanent magnets lose their holding force. If you weld directly against the magnet or let torch flame wash over the casing, the internal magnetic material can permanently degrade. Keep the magnet away from direct puddle heat and allow pieces to cool before repositioning.
Are switchable welding magnets worth it for beginners?
Switchable magnets cost more per unit than fixed blocks, but the ability to turn off the magnetic field saves significant time. You can position pieces without the magnet snapping prematurely into the wrong spot. Turning the switch off also lets metal shavings and grinding grit drop right off instead of sticking to the casing.
How many welding magnets do I need to start?
For simple brackets and flat joints, a pair of magnets is often sufficient. If you plan to build square tubing frames, boxes, or cart bases, a four-pack lets you fixture all four corners at the same time. Having four matching units keeps the entire frame square while you place your tack welds.
Can I use a welding magnet as a ground clamp?
Standard holding magnets are not designed to carry welding current. Running arc current through a positioning magnet can cause arcing inside the casing, ruin the magnet, and lead to poor weld penetration. Always attach your dedicated ground clamp directly to the workpiece or your steel welding bench.
Related: how to use welding magnets, welding magnets with on off switch, best magnetic welding clamps, and our welding tables and carts section. Also see our magnet for welding ground. Also see our types of welding clamps. Also see our angle clamps for welding. Also see our best heavy duty welding clamps. Also see our best welding table for home shop. Also see our best welder for beginners. Also see our welding projects for beginners.
Scoring, line by line
Each magnet set is scored out of 10 on performance, build, value, safety listing, and warranty, following the criteria on our How We Pick page. Welding magnets carry no electrical certification to report, so safety scores zero across all five picks; ranking reflects the remaining criteria and checkable listing facts.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| YESWELDER SWM-M | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Strong Hand Tools MVDF44 | 9.6 | 28 | 21 | 20 | n/a | 0 |
| GUTIMORE 25LB-4P | 9.4 | 24 | 19 | 19 | n/a | 0 |
| Hobart 770662 | 9.4 | 22 | 20 | 19 | n/a | 0 |
| KEWANQI KWQ2-4M-FBA | 9.3 | 21 | 16 | 18 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.





