Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Manual Chain Hoist: How to Use and Choose One

A manual chain hoist lifts heavy shop loads by hand chain, and the right pick depends on rated capacity, lift height, headroom and brake type stated by the maker.

Manual Chain Hoist: How to Use and Choose One
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1JET 1-Ton Hand Chain Hoist Chain Fall, 20' LiftJET 1-Ton Hand Chain Hoist Chain Fall, 20' Lift9.8/10View on Amazon
  2. 2SPECSTAR Hand Chain Hoist 2 Ton 4400 Lbs CapacitySPECSTAR Hand Chain Hoist 2 Ton 4400 Lbs Capacity9.7/10View on Amazon
  3. 3SPECSTAR Hand Chain Hoist 1 Ton 2200 Lbs CapacitySPECSTAR Hand Chain Hoist 1 Ton 2200 Lbs Capacity9.6/10View on Amazon
  4. 4VEVOR Hand Chain Hoist, 1 Ton 2200 lbs Capacity 20VEVOR Hand Chain Hoist, 1 Ton 2200 lbs Capacity 209.5/10View on Amazon

You have a heavy load to move in the shop and no powered lift in reach, so the work comes down to a hand chain, a brake that holds the load, and a hook rated for the job. A manual chain hoist answers that need: it lifts materials by hand through a load chain, and you choose it by rated capacity, lift height, headroom and brake type. This guide covers how it works, how to use it, and how to read the stated specs before you buy.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

JET 1-Ton Hand Chain Hoist Chain Fall, 20' Lift

JET 1-Ton Hand Chain Hoist Chain Fall, 20' Lift

Jet9.8/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 Ton hand chain hoist with 20 ft of lift, about 60.5 lb of pull, a Weston-style double-pawl brake and 12 inches of headroom for mezzanine, attic and pit work.

Pros

  • Rated at 1 Ton and 2,200 lb with 20 ft of lift
  • Weston-style double-pawl brake with needle bearings on the load sheave
  • Needs just 12 inches of headroom under low beams
  • Limited lifetime warranty for manual hoists

Cons

  • Heaviest stated weight here at 35.85 pounds
  • No storage bag in the box
  • Rated at 1 Ton, below the 2 Ton pick here
  • Pull figure is stated at about 60.5 lb for rated load
SPECSTAR Hand Chain Hoist 2 Ton 4400 Lbs Capacity

SPECSTAR Hand Chain Hoist 2 Ton 4400 Lbs Capacity

SPECSTAR9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 Ton hand chain hoist with 10 ft of chain, 8.5 ft of effective lift, a mechanical load brake and forged steel hooks for warehouse and automotive lifting.

Pros

  • Rated at 2 Ton and 4400 lb, the highest capacity here
  • Mechanical load brake built to meet ASME B30.16 standards
  • 360 degree rotating forged steel hooks
  • Pre-lubricated ball bearings stated for smooth lifting

Cons

  • Effective lift is 8.5 ft from 10 ft of chain
  • No warranty term is stated
  • Headroom figure is not stated for tight beams
  • Pull force figure is not stated for rated load
SPECSTAR Hand Chain Hoist 1 Ton 2200 Lbs Capacity

SPECSTAR Hand Chain Hoist 1 Ton 2200 Lbs Capacity

SPECSTAR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 Ton hand chain hoist with 10 ft of chain, 8.5 ft of effective lift, a mechanical load brake and a 1 year warranty for warehouse and automotive work.

Pros

  • Rated at 1 Ton and 2200 lb for overhead lifting
  • Mechanical load brake built to meet ASME B30.16 standards
  • 360 degree rotating forged steel hooks
  • 1 year warranty stated for this model

Cons

  • Effective lift is 8.5 ft from 10 ft of chain
  • Rated at 1 Ton, below the 2 Ton pick here
  • Headroom figure is not stated for tight beams
  • Item weight figure is not stated for carrying
VEVOR Hand Chain Hoist, 1 Ton 2200 lbs Capacity 20

VEVOR Hand Chain Hoist, 1 Ton 2200 lbs Capacity 20

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 Ton hand chain hoist with 20 ft of lift, G80 galvanized chain, a double-pawl brake and a guided leading chain device for factory and dock lifting.

Pros

  • Rated at 1 Ton and 2200 lbs with 20 ft of lift
  • G80 galvanized manganese steel lifting chain
  • Double-pawl brake distributes load to opposite sides of gears
  • Guided-type leading chain device stated for smooth pulling

Cons

  • No warranty term is stated
  • No hoist standard is stated for this model
  • Rated at 1 Ton, below the 2 Ton pick here
  • Pull force figure is not stated for rated load

How a manual chain hoist works

A manual chain hoist hangs from a support by its top hook. You pull the hand chain, the gear train turns the load sheave, and the load chain raises or lowers the bottom hook. A brake holds the load when you stop pulling. The maker lists the rated capacity in tons and pounds, and that rated figure is the limit for the load. Hooks, chain grade and brake type are stated per model, so read those lines before you compare lift height or price class.

Side by side

Product Rated capacity Lift Brake Gear Score
JET S90-100-20 1 Ton (2,200 lb) 20 ft Weston-style double-pawl brake 9.8/10
SPECSTAR 2-Ton 10 ft 2 Ton (4400 lb) 10 ft chain, 8.5 ft effective lift Mechanical load brake 9.7/10
SPECSTAR 1-Ton 10 ft 1 Ton (2200 lb) 10 ft chain, 8.5 ft effective lift Mechanical load brake 9.6/10
VEVOR 1-Ton 20 ft 1 Ton (2200 lbs) 20 ft Double-pawl brake 9.5/10

Capacities and lift figures in the table repeat the figures in the product cards below. Effective lift is shorter than total chain length on the models that state both figures.

How to use a manual chain hoist

  • Check the rated capacity. Match the load to the rated capacity stated by the maker, and never exceed that rated figure.
  • Hang and hook the load. Attach the top hook to a support that suits the load, then attach the bottom hook to the load with the latch closed where a latch is stated.
  • Pull the hand chain. Pull steadily to raise the load, and let the brake hold the load when you stop. Keep the load clear of people at all times.
  • Lower with control. Pull the hand chain in the lowering direction for your model, and keep hands clear of the load chain and hooks.
  • Follow the manual. Use the operating manual for your exact model for inspection, chain care and storage steps.

How to choose a manual chain hoist

  • Rated capacity. Picks here state 1 Ton and 2 Ton ratings. Quote the rated capacity exactly as listed, and never suggest exceeding it.
  • Lift height. Stated lift runs from 10 ft of chain with 8.5 ft of effective lift to 20 ft of lift, so measure from the support to the floor or pit before you choose.
  • Headroom and pull. The JET model (on Amazon) states 12 inches of headroom and about 60.5 lb of pull for its rated load. Other picks here do not state those figures, so do not carry them across models.
  • Brake and chain. Stated brakes include a Weston-style double-pawl brake, a mechanical load brake and a double-pawl brake. Stated chains include Grade 80 and G80 galvanized chain.
  • Hooks and warranty. Swivel hooks stated at 360 degrees appear across these picks. Warranty terms stated here run from 1 year to a limited lifetime term, and some picks state no warranty term.

Gear picks for shop lifting

The picks below cover the capacity and lift-height measurements from the choosing step above, ranked by Gear Score.

Hoist safety. Use a manual chain hoist for materials only. Never lift people, and never lift a load over people. Keep the load within the rated capacity stated by the maker, keep the area under the load clear, and follow the manual for inspection and chain care on your exact model.

FAQ for welders

What capacity manual chain hoist do I need?

Match the load to the rated capacity stated by the maker. Picks here state 1 Ton ratings at 2,200 lb and a 2 Ton rating at 4400 lb. Never exceed the rated figure for your model, and weigh or document the load before you lift it.

How much lift height do these hoists state?

The JET and VEVOR picks state 20 ft of lift. The SPECSTAR picks state 10 ft of chain with 8.5 ft of effective lift height. Measure the distance from your support to the lowest point of the lift, then compare that measurement with the stated effective lift.

Can a manual chain hoist lift people?

No. The JET listing states the hoist is for lifting materials only and says never lift people. Keep people clear of the load and never lift a load over people, whatever the rated capacity states.

What brake types are stated on these picks?

The JET model states a Weston-style double-pawl brake. The SPECSTAR models state a mechanical load brake. The VEVOR model states a double-pawl brake that distributes load to opposite sides of the gears.

What should I check before ordering a chain hoist?

Check rated capacity, stated lift height, headroom where stated, chain grade, hook type and warranty term for the exact model. The JET model states 12 inches of headroom, while the other picks here do not state a headroom figure. Confirm support, chain and hook details in the manual for your model before you lift.

Related: metal fab tools, hoists and lifting, and lifting and pressing.

More buying guides

Hoists and Lifting ·

Best Lever Chain Hoist (2026)

5 lever chain hoists for shop and farm work, compared by rated capacity, lift, chain, brake, weight and warranty.