Best Welding Clamps Under $35 (2026): 4 Sets Scored
Four welding clamp sets under $35 compared on style, size, pack count and stated clamping force, from 6 inch F clamps to 11 inch locking C-clamps.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJMIATRY F Clamps9.7/10View on Amazon - 2
Best Largefindmall C-Clamp9.6/10View on Amazon - 3
Best Small SetSOLUDE C-Clamp9.6/10View on Amazon - 4
Best ChromeYESWELDER C-Clamp9.5/10View on Amazon
A frame that shifts halfway through a bead ruins the fit-up, and a clamp that holds it square is worth more than another grinder wheel. This guide compares four clamp sets for the best welding clamps under 35, on clamp style, size, pack count and stated force.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall JMIATRY F Clamps: 6 inch F clamps with 1320 lbs force, swivel pads and a 4 pack Check price on Amazon
- Best Large findmall C-Clamp: 11 inch locking C-clamps in a 5 pack with swivel pads Check price on Amazon
- Best Small Set SOLUDE C-Clamp: 6 inch locking C-clamps in a 6 pack with ergonomic handles Check price on Amazon
- Best Chrome YESWELDER C-Clamp: 11 inch chrome-plated C-clamps with heat-treated jaws, 3 pack Check price on Amazon
The machines

JMIATRY 4PCS Welding F Clamps 6 Inches Heavy Duty
A 6 inch F clamp set in carbon steel with swivel pads and 1320 lbs of clamping force.
Pros
- 1320 lbs clamping force stated
- Jaw opening up to 6 inch stated
- 4 pack for simultaneous projects
- Swivel pads for flat and angled work
Cons
- Throat depth stated two ways in the listing
- No warranty term stated
- No weight stated
- Jaw opening tops out at 6 inch

findmall 11 Inch Locking C-Clamp 5Pack Locking
An 11 inch locking C-clamp set in alloy steel with a regular tip and swivel pad.
Pros
- 11 inch locking C-clamp size
- 5 pack for shop and farm use
- Swivel pad avoids scratches
- Turn-screw adjusts size and pressure
Cons
- No warranty term stated
- No weight stated
- Listing describes use for light applications
- No jaw opening width stated

6-Inch C-Clamp Locking Pliers,Heavy Duty Vise Grip
A 6 inch C-clamp locking pliers set in heat-treated carbon steel with ergonomic handles.
Pros
- Heat-treated carbon steel
- 6 pack for multiple joints
- Adjustable jaw opening
- Ergonomic handles for comfort
Cons
- No warranty term stated
- No clamping force stated
- No throat depth stated
- 6 inch size only

YESWELDER C-Clamp Set of 11 inches
An 11 inch C-clamp set in chrome-plated carbon steel with heat-treated jaws.
Pros
- Chrome-plated 45# carbon steel
- Heat-treated jaws
- Precision stamping for uniformity
- Chrome plating adds corrosion resistance
Cons
- Pack count stated two ways in the listing
- No warranty term stated
- No clamping force stated
- No jaw opening width stated
Other welders and gear to compare
Pony Jorgensen 2650 5-Inch C-ClampCheck price on Amazon
Amazon Basics Adjustable Metal Face Clamps for WoodworkingCheck price on Amazon
POWERTEC 4PK Toggle ClampCheck price on Amazon
MAXPOWER 4-pieces Heavy Duty F Clamp 12-inchCheck price on Amazon
10 Pack Toggle ClampsCheck price on Amazon
4 Pack Toggle ClampsCheck price on Amazon
Spec sheet comparison
| Clamp | Gear Score | Type | Size | Pack | Material |
|---|---|---|---|---|---|
| JMIATRY F Clamps | 9.7/10 | F clamp | 6 inch | 4 pack | Carbon steel |
| findmall C-Clamp | 9.6/10 | C-clamp locking pliers | 11 inch | 5 pack | Alloy steel |
| SOLUDE C-Clamp | 9.6/10 | C-clamp locking pliers | 6 inch | 6 pack | Carbon steel |
| YESWELDER C-Clamp | 9.5/10 | C-clamp | 11 inch | 3 pack | Carbon steel |
All specs here repeat what the maker rates and the listing prints, copied down 28 October 2026.
Buying guide: best welding clamps under 35
C-clamp versus F clamp
Three of these sets are locking C-clamps and one is an F clamp, and the shape decides how the clamp meets the work. The SOLUDE, findmall and YESWELDER sets are C-clamp locking pliers: a C-shaped jaw that locks with plier handles and holds round stock, flat bar and odd shapes. The JMIATRY set is an F clamp: a bar with a fixed jaw and a sliding jaw that moves along the bar, which suits flat work and long pieces that need even pressure across the face. Swivel pads appear on the SOLUDE, findmall and JMIATRY listings, and they spread the load so the jaw marks the work less. The YESWELDER listing does not state swivel pads, so its heat-treated jaws meet the work directly.
Size and throat depth
Size means two different things on these listings, and both matter at the bench. The headline size is the clamp size: 6 inch on the SOLUDE and JMIATRY sets, 11 inch on the findmall and YESWELDER sets. The JMIATRY listing also states a jaw opening up to 6 inch and a throat depth, though the title states 3 inch while the bullets state 3.15 inch, so treat the throat figure as approximate. The other three listings state no throat depth and no jaw opening width, which makes them harder to match to a specific joint. When the joint is deep or the piece is wide, the stated opening and throat depth decide the fit, not the headline size alone.
Pack count and value
Pack count changes what a set can do on a real job, since fit-up often needs several clamps at once. The SOLUDE set has 6 clamps, the findmall set has 5, the JMIATRY set has 4, and the YESWELDER set is listed as 3 in its title and spec table, though one bullet says 2, so count the box on arrival. More clamps let a welder tack a frame square from several sides before striking an arc, while a smaller set suits one joint at a time. The JMIATRY set is the only one that states a clamping force, 1320 lbs, which gives its value score a number the others cannot match.
Materials and build
All four sets state carbon steel or alloy steel, with heat treatment named on three of them. The SOLUDE set uses heat-treated carbon steel with ergonomic handles. The findmall set uses heat-treated alloy steel with a turn-screw that adjusts size and pressure. The JMIATRY set uses solid 45# carbon steel with an anti-rust plating surface and a smooth sliding handle. The YESWELDER set uses chrome-plated 45# carbon steel with heat-treated jaws and precision stamping, and the chrome plating adds corrosion resistance. On weight, the SOLUDE set is listed at 3 pounds and the YESWELDER set at 2.14 kg, while the findmall and JMIATRY listings state no weight.
Before You Strike an Arc
- Count the box on arrival: the YESWELDER title and spec table say 3 clamps while one bullet says 2.
- Check the JMIATRY throat depth against the joint, since the title states 3 inch and the bullets state 3.15 inch.
- Confirm the jaw opening fits the work: only the JMIATRY listing states an opening, up to 6 inch.
- Use the swivel pads on the SOLUDE, findmall and JMIATRY clamps where the jaw meets finished surfaces.
- Set the turn-screw or sliding handle before tacking, so the clamp holds pressure through the first beads.
FAQ for welders
What is the difference between a C-clamp and an F clamp?
A locking C-clamp closes like pliers and locks onto the work, which suits round stock, flat bar and odd shapes. An F clamp runs a sliding jaw along a bar, which suits flat work and long pieces that need even pressure across the face. The JMIATRY set is the F clamp here, while the other three sets are locking C-clamps.
How much clamping force do these clamps state?
Only the JMIATRY listing states a force, 1320 lbs, with a jaw opening up to 6 inch. The SOLUDE, findmall and YESWELDER listings state no clamping force, so their holding power cannot be compared on paper. Judge those three on stated material, jaw style and pack count instead.
Which clamp fits a 6 inch opening?
The JMIATRY F clamp states a jaw opening up to 6 inch, which matches a 6 inch joint directly. The SOLUDE set is a 6 inch clamp but states no opening width, so its fit to a 6 inch joint is not stated. The 11 inch findmall and YESWELDER sets are larger clamps, but neither states an opening width.
Do these clamps state a warranty?
None of the four listings state a warranty term. The YESWELDER listing uses strong language about its steel and jaws, but that language is not a warranty term. Buy on the stated specs, and check the clamps on arrival.
How many clamps come in each set?
The SOLUDE set has 6 clamps, the findmall set has 5, and the JMIATRY set has 4. The YESWELDER set is listed as 3 in its title and spec table, though one bullet says 2, so count the box when it arrives.
Related: best heavy duty welding clamps for bigger work, best locking C-clamp for plier-style clamps, best magnetic welding clamps for hands-free holding, and the types of welding clamps guide for choosing a style.
Scoring, line by line
Each clamp set is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Safety here means a stated electrical or PPE certification, and none of these listings state one, so safety scores nothing across the board. None of the four listings state a warranty term either.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JMIATRY F Clamps | 9.7 | 32 | 21 | 21 | n/a | 0 |
| findmall C-Clamp | 9.6 | 29 | 20 | 21 | n/a | 0 |
| SOLUDE C-Clamp | 9.6 | 28 | 20 | 21 | n/a | 0 |
| YESWELDER C-Clamp | 9.5 | 27 | 20 | 20 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




