Best Rotary File for Metal (2026): 4 Picks for Steel, Welds and Deburring
Four rotary files for metal, from a 5-piece carbide burr set to a single YG8 burr for hardened steel, compared on shank, cutter size, material and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSworker 5-Piece Carbide Burr Set9.6/10View on Amazon - 2
Best Single BurrYUFUTOL SB-5 Carbide Burr9.5/10View on Amazon - 3
Best for DrillsNordWolf 5-Piece Rotary Burr Set9.4/10View on Amazon - 4
Best Brand-Name RaspDEWALT DWA4970 Rotary Rasp9.3/10View on Amazon
A weld bead leaves a ridge, a cut edge leaves a burr, and a drilled hole leaves a sharp lip. The best rotary file for metal cleans all of them without a grinding disc, and it fits into tight spaces a wheel cannot enter. This guide compares 4 rotary files and burr sets on what each listing states: shank, cutter size, material, pack size and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Sworker 5-Piece Carbide Burr Set: A 5-piece tungsten carbide set on 1/4 inch shanks with 8 mm heads, a double cut, and the only stated warranty here, a 5-year returnless replacement. Check price on Amazon
- Best Single Burr YUFUTOL SB-5 Carbide Burr: A YG8 tungsten carbide burr with a 1/2 inch cutter and a 1 inch cut length, listed for steel to HRC65. Check price on Amazon
- Best for Drills NordWolf 5-Piece Rotary Burr Set: A 5-piece rasp set with a 1/4 inch hex shank for drills and impact drivers, 5 profiles and a suggested 8,000 to 10,000 RPM. Check price on Amazon
- Best Brand-Name Rasp DEWALT DWA4970 Rotary Rasp: A DEWALT steel cylinder rasp with a 1/2 inch head and a 1/4 inch hex shank, made for ferrous metal. Check price on Amazon
The machines

Sworker 5Pcs Carbide Burr Set 1/4 Shank w/Clear
A 5-piece tungsten carbide burr set on 1/4 inch shanks with 8 mm heads, a double cut, a clear box and a stated 5-year returnless replacement.
Pros
- 5 tungsten carbide burrs on 1/4 inch shanks with 8 mm heads
- Double cut gives a finer finish than single cut and smaller chips
- Fits DeWALT, Ingersoll Rand, Milwaukee and Makita die grinders, electric or air
- Clear box, manual and a stated 5-year returnless replacement
Cons
- Does not fit a 6mm collet
- No suggested speed in the listing
- All 5 burrs share a single 8 mm head size

YUFUTOL SB-5 Tungsten Carbide Burr Cylinder Shape
A single YG8 tungsten carbide cylinder burr with a 1/2 inch cutter, a 1 inch cut length and a 1/4 inch shank, made for steel to HRC65.
Pros
- YG8 tungsten carbide, heat treated, for steel to HRC65
- Double cut cylinder, 1/2 inch cutter with a 1 inch cut length
- 45 mm shank length with a 1/4 inch shank diameter
- Maker claims 10 times the working life of HSS
Cons
- Single burr only; no set, case or manual is stated
- No warranty term is stated
- No suggested speed in the listing
- Cylinder shape only, no other profiles in the listing

NordWolf 5-Piece Rotary Burr Rasp Files Set
A 5-piece bearing steel rasp set with a titanium nitride coat, a 1/4 inch hex shank for drills and impact drivers, and 5 file profiles.
Pros
- 5 profiles: cylindrical flat end, cylindrical round end, conical round end, conical pointed end and oval
- 1/4 inch hex shank fits drills and impact drivers
- Suggested speed of 8,000 to 10,000 RPM is stated
- Solid plastic case with a hanging clip for storage
Cons
- Bearing steel, not carbide
- No warranty term is stated
- No cutter diameter is stated
- Hex shank is listed for drills and impact drivers, with no die grinder fit stated

DEWALT DWA4970 Steel 1/2" Hp Cylinder Rotary Rasp
A single steel cylinder rasp file with a 1/2 inch head and a 1/4 inch hex shank, made for deburring, shaping and grooving ferrous metal.
Pros
- High performance steel tip for long life, per the listing
- Precision cutting edges reduce clogging
- 1/4 inch hex shank for easy bit changes
- Made for ferrous metal: deburring, shaping and grooving
Cons
- Single rasp, no set or case stated
- Steel, not carbide
- No warranty term is stated
- No cutter length or suggested speed is stated
Other welders and gear to compare
Metal Rotary File Drill Bits Set With Burrs For GrindingCheck price on Amazon
5Pcs Rotary File Cutting BurrsCheck price on Amazon
5Pcs HSS Rotary File SetCheck price on Amazon
TARIST Metal File SetCheck price on Amazon
ValueMax 7PCS Interchangeable Needle File SetCheck price on Amazon
warmtree 3 pcs Metal File SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Shank | Cutter size | Material | Pieces | Warranty |
|---|---|---|---|---|---|---|
| Sworker 5-Piece Carbide Burr Set | 9.6/10 | 1/4 in | 8 mm head | Tungsten carbide | 5 | 5 years |
| YUFUTOL SB-5 Carbide Burr | 9.5/10 | 1/4 in | 1/2 in cutter, 1 in cut | Tungsten carbide YG8 | 1 | None stated |
| NordWolf 5-Piece Rotary Burr Set | 9.4/10 | 1/4 in hex | 5 profiles | Bearing steel, TiN coated | 5 | None stated |
| DEWALT DWA4970 Rotary Rasp | 9.3/10 | 1/4 in hex | 1/2 in cylinder | Steel | 1 | None stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 10 November 2026.
How to pick the best rotary file for metal
Shank size and fit
Every pick here states a 1/4 inch shank. The Sworker set uses a round 1/4 inch shank for die grinders, and the listing names DeWALT, Ingersoll Rand, Milwaukee and Makita, electric or air. The NordWolf and DEWALT use a 1/4 inch hex shank, and the NordWolf fits drills and impact drivers. Check the collet before you buy: the Sworker set does not fit a 6mm collet.
Cutter size and shape
The Sworker heads are 8 mm, the DEWALT and YUFUTOL cutters are 1/2 inch, and the YUFUTOL cut length is 1 inch. The NordWolf set gives 5 profiles instead of a single size: cylindrical flat end, cylindrical round end, conical round end, conical pointed end and oval. Match the profile to the job: a cylinder for flat passes, a cone for tight corners and an oval for curved work.
Carbide or steel
Tungsten carbide shows up in 2 picks: the Sworker set and the YUFUTOL SB-5, which the maker lists for steel to HRC65. The NordWolf set is bearing steel with a titanium nitride coat, and the DEWALT rasp is steel with a high performance tip. The YUFUTOL maker claims 10 times the working life of HSS, and the Sworker listing calls its burrs very sharp, aggressive and durable.
Single cut or double cut
The Sworker and YUFUTOL burrs are double cut. The Sworker listing states that a double cut gives a finer finish than a single cut and makes smaller chips. The NordWolf and DEWALT listings do not state a cut type. If the finish matters, pick a double cut burr.
Pack size and warranty
The Sworker and NordWolf sets hold 5 pieces each, while the YUFUTOL and DEWALT are single burrs. Only the Sworker states a warranty: a 5-year returnless replacement. A set covers more shapes and profiles; a single burr suits a welder who already owns a set and needs a single size.
Use as directed. Clamp the work before you cut, keep fingers clear of the cutter, and wear eye protection: a burr throws chips. Run the NordWolf set at the suggested 8,000 to 10,000 RPM, and never exceed the speed your tool is rated for. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check the shank: every pick here states a 1/4 inch shank, and the Sworker set does not fit a 6mm collet.
- Match the cutter to the job: 8 mm heads on the Sworker set for tight spaces, 1/2 inch cutters on the DEWALT and YUFUTOL for wider passes.
- Run the NordWolf set at 8,000 to 10,000 RPM, the range its listing suggests.
- Check the case on arrival: a clear box on the Sworker set, a solid plastic case on the NordWolf set, and a transparent tube on the YUFUTOL.
- Keep the manual: the Sworker set includes a detailed manual, and the YUFUTOL comes in a tube for safe storage.
FAQ for welders
What shank size do rotary files for metal use?
Every pick here states a 1/4 inch shank. The Sworker set uses a round shank for die grinders, while the NordWolf and DEWALT use a 1/4 inch hex shank, and the NordWolf fits drills and impact drivers. Check the collet before you buy, since the Sworker set does not fit a 6mm collet.
Can a rotary file cut hardened steel?
The YUFUTOL SB-5 is the pick here for hardened steel: the maker lists YG8 tungsten carbide for steel to HRC65 and claims 10 times the working life of HSS. The Sworker set is tungsten carbide too, and the NordWolf and DEWALT are steel. Match the burr to the hardness of the steel you cut.
What is the difference between a carbide burr and a steel rasp?
A carbide burr is made of tungsten carbide, like the Sworker set and the YUFUTOL SB-5, while a steel rasp is made of steel, like the NordWolf set and the DEWALT DWA4970. The Sworker listing states that a double cut gives a finer finish than a single cut. Carbide suits steel and welds; steel rasps suit lighter deburring and shaping.
Do rotary files fit a drill?
The NordWolf set does: its 1/4 inch hex shank fits drills and impact drivers. The Sworker set fits die grinders, electric or air, and the listing names DeWALT, Ingersoll Rand, Milwaukee and Makita. The DEWALT rasp has a 1/4 inch hex shank for easy bit changes. Check the shank type against the tool you own.
How many pieces should a rotary file set have?
It depends on the work. The Sworker and NordWolf sets hold 5 pieces each, with 5 profiles in the NordWolf set, while the YUFUTOL and DEWALT are single burrs. A set covers more shapes; a single burr replaces a worn size.
Related: best tungsten carbide rotary file, single cut vs double cut carbide burr, best carbide burr for cast iron, best carbide burr for aluminum, best air powered deburring tool, deburring tool vs metal file, and the metal fab tools hub.
Scoring, line by line
Each rotary file is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Rotary files have no electrical safety listing to state, so every file here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Sworker 5-Piece Carbide Burr Set | 9.6 | 30 | 21 | 21 | 0 | 4 |
| YUFUTOL SB-5 Carbide Burr | 9.5 | 30 | 21 | 19 | 0 | 0 |
| NordWolf 5-Piece Rotary Burr Set | 9.4 | 28 | 20 | 20 | 0 | 0 |
| DEWALT DWA4970 Rotary Rasp | 9.3 | 26 | 19 | 18 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




