Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Metal File Uses and Best Applications

Metal file uses cover shaping, deburring, smoothing and surface finishing on metal, wood and hard plastic. What each file shape does, and which set fits which bench work.

Metal File Uses and Best Applications
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Nicholson 9 Pc. 6, 8"& 10" Maintenance File Set"Nicholson 9 Pc. 6, 8"& 10" Maintenance File Set"9.7/10View on Amazon
  2. 2TARIST 27PCS Metal File SetTARIST 27PCS Metal File Set9.6/10View on Amazon
  3. 3LIBRATON Metal File, 3PCS Metal File SetLIBRATON Metal File, 3PCS Metal File Set9.5/10View on Amazon
  4. 4Tsubosan Hand tool Workmanship file set of 5 ST-06Tsubosan Hand tool Workmanship file set of 5 ST-069.3/10View on Amazon

You have a bracket that almost fits, an edge that catches a glove, a hole that needs opening up a touch. That is where metal file uses start: a hand file removes small amounts of material with control, so you shape, deburr and smooth without power tools. This guide covers what each file shape does, which tasks call for which cut, and which of the sets below fits which bench.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Nicholson 9 Pc. 6, 8"& 10" Maintenance File Set"

Nicholson 9 Pc. 6, 8"& 10" Maintenance File Set"

Nicholson9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 piece maintenance set in 6, 8 and 10 inch lengths with bastard and smooth cuts and a mill file, plus a stated lifetime warranty.

Pros

  • 9 pieces across 6, 8 and 10 inch lengths
  • Bastard and smooth cuts in one set
  • Flat, half round, round and slim taper shapes
  • Standard Limited Lifetime warranty stated

Cons

  • 3.19 lb set weight is the heaviest stated here
  • No storage case mentioned for the set
  • No needle files for fine detail work
  • Handle style is not described
TARIST 27PCS Metal File Set

TARIST 27PCS Metal File Set

TARIST9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 27 piece cased set with 4 steel files, 12 needle files, sandpaper and a wire brush, in T12 steel hardened to 62-66 HRC.

Pros

  • 27 pieces including 12 needle files
  • T12 high-carbon steel hardened to 62-66 HRC
  • Dual-zone storage case keeps files in slots
  • Soft-grip anti-slip handles

Cons

  • No warranty term is stated
  • File lengths are not given
  • Only 4 full-size steel files in the set
  • Sandpaper grits are not listed
LIBRATON Metal File, 3PCS Metal File Set

LIBRATON Metal File, 3PCS Metal File Set

LIBRATON9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Three 8 inch blade files in flat, half-round and round shapes, T12 high-carbon steel with rubber handles.

Pros

  • 8 inch blades with 5 inch handles, 13 inches overall
  • Flat, half-round and round shapes cover common work
  • T12 high-carbon alloy steel with anti-rust coating
  • Non-slip rubber handles

Cons

  • No warranty term is stated
  • Only 3 files in the set
  • No needle files or triangle file
  • No storage case mentioned
Tsubosan Hand tool Workmanship file set of 5 ST-06

Tsubosan Hand tool Workmanship file set of 5 ST-06

TSUBOSAN9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact workmanship file set from Japan in orange, with the lowest stated weight here.

Pros

  • Lowest stated weight of the four sets
  • Compact set for bench and toolbox carry
  • Made in Japan, per the maker
  • Orange color is easy to spot on the bench

Cons

  • File shapes and lengths are not described
  • Steel grade is not stated
  • Handle style is not described
  • No storage case mentioned

Metal file uses, task by task

Most bench work falls into four jobs. Shaping takes a part toward its final form, like easing a corner or fitting a tab. Deburring knocks down the sharp edge left by a saw, drill or shear. Smoothing and surface finishing clean up a face before paint, welding or assembly. Detail work gets into slots, corners and small features where a full-size file will not reach.

Which shape does what

  • Flat file. Flat faces, edges and straight shoulders. The workhorse for deburring and general shaping.
  • Half-round file. One flat side, one curved side. The curved side works inside curves and concave surfaces; the flat side still handles faces.
  • Round file. Holes, slots and inside curves. Reach for it when a drilled hole needs opening or a curve needs easing.
  • Triangle file. Corners, slots and angled faces that a flat file bridges over.
  • Needle files. Small versions of the same shapes for detail work, small parts and tight spots.

Cuts and steel, in plain terms

Cut describes how coarse the teeth are. Bastard cut removes material faster and leaves a rougher finish; smooth cut removes less and leaves a cleaner face. A set with both lets you rough out with one file and finish with another. The Nicholson set states bastard and smooth cuts across its 9 pieces, including a mill file. The LIBRATON and TARIST sets state T12 high-carbon steel, and TARIST states a hardness of 62-66 HRC. Where a maker does not state a cut or steel grade, this guide says so rather than guessing.

File sets for the work above

The shaping, deburring and finishing steps above are the work these sets are built for, and each card says which part of that work it handles.

Choosing a set

Start with the work, not the piece count. If most of your filing is edges, faces and hole work on brackets and small parts, three full-size shapes in flat, half-round and round cover it. If you do detail work, needle files earn their place. If you file often and want coarse and fine cuts on hand, a larger set with stated lengths and cuts saves swapping tools mid-job. Our metal fab tools hub collects the rest of the bench gear we cover.

FAQ for welders

What are metal files used for?

Shaping parts, deburring sharp edges, smoothing faces and finishing surfaces on metal, and the same jobs on wood and hard plastic. A file removes small amounts of material with control, which suits fit-up work where a grinder would take off too much.

Which file shape should I buy first?

A flat file, because it handles edges, faces and general shaping. Add a half-round for curves and a round file for holes when the work calls for them. Sets that bundle flat, half-round and round shapes cover most bench work.

What does bastard cut mean?

It is a coarse tooth cut that removes material faster and leaves a rougher finish. Smooth cut removes less per stroke and leaves a cleaner face. The Nicholson set here includes both so you can rough out and finish with different files.

Can I use a metal file on wood or plastic?

Yes. The LIBRATON set states use on metal, wood and hard plastic, and the TARIST set states use on metal and wood. Files suit shaping and deburring on these materials; keep the teeth clean with a brush so the file keeps cutting instead of skating.

How do I keep files cutting well?

Brush the teeth clean when they load up with material, store files so they do not rub against each other, and use steady strokes on the push. The TARIST set includes a wire brush and a slotted case for exactly that storage.

Related: metal fab tools for the rest of the bench setup.

More buying guides

Metal Fab Tools ·

Metal File Types: Which File to Use

Metal file types run from flat and half-round files for shaping and smoothing to needle files for fine detail, and this guide matches each…