Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Carbide Burr for Cast Iron (2026): 5 Picks Compared

Five double-cut carbide burrs with 1/4 inch shanks compared for cast iron work, from long-reach porting burrs to a radius-end cylinder for weld seams.

Best Carbide Burr for Cast Iron (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sworker Long Burr 6.8 inBest OverallSworker Long Burr 6.8 in9.7/10View on Amazon
  2. 2Sworker Burr Set 5-PackBest Set ValueSworker Burr Set 5-Pack9.7/10View on Amazon
  3. 3EZARC SC-5 BurrBest Spec SheetEZARC SC-5 Burr9.6/10View on Amazon
  4. 4BHA SB-1 BurrBest PrecisionBHA SB-1 Burr9.6/10View on Amazon
  5. 5DEWALT SM-3 BurrBest Brand PickDEWALT SM-3 Burr9.5/10View on Amazon

A cast iron casting comes off the bench with a weld seam to clean and a port to open up, and a grinding stone loads up before the job is done. Finding the best carbide burr for cast iron means matching cut, shank, and reach to that job. This guide compares double-cut burrs on what each listing states: cutter size, shank, length, carbide grade, and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Sworker Long Burr 6.8 in: 6.8 inch reach, 1/2 inch head, and a 5-year term Check price on Amazon
  • Best Set Value Sworker Burr Set 5-Pack: 5 long-shank burrs in a slotted box, 5-year term Check price on Amazon
  • Best Spec Sheet EZARC SC-5 Burr: YG6 carbide at 90 HRA with a stated rpm range Check price on Amazon
  • Best Precision BHA SB-1 Burr: Five-axis CNC flutes with a silver weld bond Check price on Amazon
  • Best Brand Pick DEWALT SM-3 Burr: C10 carbide double-cut burr for steel and cast iron Check price on Amazon

The machines

Sworker 1Pc Long Carbide Burr Set 1/4" Shank Total

Sworker 1Pc Long Carbide Burr Set 1/4" Shank Total

Sworker9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single long-shank carbide burr with a 1/2 inch head and 6.8 inch total length for tight areas in cast iron, steel, and aluminum work.

Pros

  • 6.8 inch total length reaches tight and hard-to-reach areas
  • 1/2 inch head diameter for porting and grinding work
  • Double cut gives a finer finish and smaller chips
  • 5 years returnless replacement stated

Cons

  • No safety certification is stated
  • Warning: burr must stay in contact with the workpiece while running
  • Single burr only, not a set of shapes
Sworker 5Pcs Long Carbide Burr Set 1/4" Shank

Sworker 5Pcs Long Carbide Burr Set 1/4" Shank

Sworker9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A set of 5 long-shank carbide burrs with 1/4 inch shanks and 4.3 inch total length, in a slotted plastic box, for porting and grinding cast iron and steel.

Pros

  • 5 burrs in one set, in a slotted plastic box with a manual
  • 4.3 inch total length for tight and hard-to-reach areas
  • Double cut gives a finer finish and smaller chips
  • 5 years returnless replacement stated

Cons

  • No safety certification is stated
  • Warning: burr must stay in contact with the workpiece while running
  • No individual burr shapes are listed
  • Head diameter is stated as 10 mm, unlike the inch figures elsewhere
EZARC Tungsten Carbide Rotary Burr Bit

EZARC Tungsten Carbide Rotary Burr Bit

EZARC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cylinder radius-end burr in YG6 carbide with a 1/2 inch cutter diameter and 1 inch cut length, rated 90 HRA, for deburring and weld seam removal.

Pros

  • YG6 tungsten carbide at 90 HRA, with wear resistance stated
  • Double cut for faster removal, less loading, smoother finish
  • Speed generally 25000 to 50000 rpm on electric and pneumatic tools
  • Radius-end cylinder shape for deburring and weld seam removal

Cons

  • No warranty term is stated
  • No safety certification is stated
  • Single burr only, not a set of shapes
BHA Tungsten Carbide Rotary Burr, SB-1

BHA Tungsten Carbide Rotary Burr, SB-1

BHA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cylinder burr with a 1/4 inch cut diameter and 5/8 inch cut length, five-axis CNC flutes, and a silver weld between head and shank.

Pros

  • Five-axis CNC precision cut flutes for uniformity and balance
  • Silver weld between head and shank, stronger than copper weld
  • Double cut for faster stock removal and smaller chips
  • End-cut for top or side cutting

Cons

  • No warranty term is stated
  • No safety certification is stated
  • No total length is stated, only cut diameter and length
  • No carbide grade number is stated beyond tungsten carbide
Single DEWALT Carbide Burr Size SM-3 with 1/4"

Single DEWALT Carbide Burr Size SM-3 with 1/4"

DEWALT9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single C10 tungsten carbide double-cut burr with a 1/4 inch shank for steel, cast iron, stainless, and hardwood grinding.

Pros

  • C10 tungsten carbide steel for hardness and heat resistance
  • Double-cut teeth stay sharper longer, per the maker
  • Works on hardened steel, cast iron, stainless, and hardwood
  • Head profiles in the range include cylinder, ball, oval, and tree

Cons

  • No warranty term is stated
  • No safety certification is stated
  • No cutter diameter or cut length is stated
  • Single burr only, not a set of shapes

Other welders and gear to compare

Spec sheet comparison

Burr Gear Score Cut Shank Cut length Pack
Sworker Long Burr 6.8 in 9.7/10 1/2 in head 1/4 in Not stated 1 burr
Sworker Burr Set 5-Pack 9.7/10 10 mm head 1/4 in Not stated 5 burrs
EZARC SC-5 Burr 9.6/10 1/2 in cutter 1/4 in 1 in 1 burr
BHA SB-1 Burr 9.6/10 1/4 in cut dia 1/4 in 5/8 in 1 burr
DEWALT SM-3 Burr 9.5/10 Not stated 1/4 in Not stated 1 burr

Ratings in this table are the makers’ own claims taken from each product page (29 October 2026).

Buying guide: the best carbide burr for cast iron

Cut and shank

Every burr here uses a 1/4 inch shank, so the die grinder collet is the same across the set. Cutter size differs: EZARC cuts 1/2 inch in diameter with a 1 inch cut length, the long Sworker single has a 1/2 inch head, the Sworker set heads are 10 mm, and BHA cuts 1/4 inch in diameter with a 5/8 inch cut length. DEWALT states no cutter size.

Reach and tight areas

Reach decides whether the burr gets into the port at all. The Sworker single runs 6.8 inches in total length, the Sworker set runs 4.3 inches, and the EZARC runs 2-3/4 inches. For cylinder head, intake, exhaust manifold, and other tight work the Sworker listings name, the longer shanks reach where a short burr cannot.

Double cut and finish

All five burrs are double cut, and the listings agree on what that gives: a finer finish than single cut, smaller chips, and less loading. EZARC adds faster material removal with better control, while BHA states faster stock removal and minimal loading.

Carbide grade and hardness

Two listings state a grade: EZARC states YG6 tungsten carbide at 90 HRA with excellent wear resistance, and DEWALT states C10 tungsten carbide steel for hardness and heat resistance. BHA and the Sworker listings state tungsten carbide without a grade number. BHA instead states five-axis CNC precision cut flutes and a silver weld between head and shank.

Warranty and pack value

Only the Sworker listings state a warranty: 5 years returnless replacement on both the single long burr and the 5-piece set. The set spreads the cost across 5 burrs in a slotted plastic box, while the others are each sold as 1 piece.

Use as directed. Clamp the workpiece and keep the burr in contact with it while the tool is running, since the Sworker listings warn that losing contact risks bending the shank. EZARC states a reverse milling cutting method and a speed generally of 25000 to 50000 rpm on electric and pneumatic tools.

Before You Strike an Arc

  • Check the die grinder collet fits a 1/4 inch shank, since every burr here uses that shank.
  • Check total length against the reach needed: 6.8 inches, 4.3 inches, or 2-3/4 inches across these listings.
  • Keep the burr in contact with the workpiece while the tool is running, per the Sworker warning.
  • Use the reverse milling cutting method EZARC states, and hold the tool steady during the cut.
  • Check the box on arrival: the Sworker set comes in a slotted plastic box with a manual, and the single comes in a telescopic tube with a manual.

FAQ for welders

What cut works for cast iron?

Double cut, per all five listings here. Double cut produces a finer finish than single cut, reduces chip size, and loads less, which suits cast iron deburring, porting, and weld seam removal.

What shank size do these burrs use?

All five use a 1/4 inch shank. That means one die grinder collet fits every burr here, and the choice comes down to cutter size, length, and pack rather than shank fit.

How long a burr do I need for tight areas?

For tight work, longer is better: the Sworker single runs 6.8 inches in total length and the Sworker set runs 4.3 inches, against 2-3/4 inches for the EZARC. The Sworker listings warn to keep the burr in contact with the workpiece while running.

Do carbide burrs need a special grinder?

No special machine is stated. EZARC states use on electric and pneumatic tools, and the Sworker and BHA listings are die grinder bits with 1/4 inch shanks.

Which burrs here carry a warranty?

Only the two Sworker listings, each with 5 years returnless replacement. EZARC, BHA, and DEWALT state no warranty term, so their warranty scores are zero.

Related: best die grinder for weld cleanup, carbide burr vs grinding stone, best carbide burr for aluminum, and the metal fab tools hub.

Scoring, line by line

Each burr is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Burrs carry no safety listing, so every burr here scores zero on that criterion; the ranking comes from the other four. The two Sworker listings state a 5-year term, and no other listing here states a warranty.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Sworker Long Burr 6.8 in 9.7 30 21 20 n/a 3
Sworker Burr Set 5-Pack 9.7 28 20 22 n/a 3
EZARC SC-5 Burr 9.6 30 21 20 n/a 0
BHA SB-1 Burr 9.6 28 21 20 n/a 0
DEWALT SM-3 Burr 9.5 28 20 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides

Metal Fab Tools ·

Best Single Cut Carbide Burr (2026)

Four single cut carbide burrs and sets for aluminum and soft metals, compared by cut type, shank size, head dimensions and warranty.