Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Temperature Stick for Welding: How to Use Them

A temperature stick for welding marks metal with a chalky line that melts when the surface reaches the rated temperature, so a welder can check heat without a gauge.

Temperature Stick for Welding: How to Use Them
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Markal Thermomelt Temperature Indicator Heat StickMarkal Thermomelt Temperature Indicator Heat StickView on Amazon
  2. 2MarkalMarkalView on Amazon
  3. 3YESWELDER E7018 5/32'' 10LB Welding Rods Stick ElectrodesYESWELDER E7018 5/32'' 10LB Welding Rods Stick ElectrodesView on Amazon
  4. 4YESWELDER E6013 1/8'' 5LB Welding Rods Stick ElectrodesYESWELDER E6013 1/8'' 5LB Welding Rods Stick ElectrodesView on Amazon
  5. 5YESWELDER 205Amp Stick Welder Digital Inverter IGBT ARCYESWELDER 205Amp Stick Welder Digital Inverter IGBT ARCView on Amazon
  6. 6HONE Stick WelderHONE Stick WelderView on Amazon

A weld cools on the bench and the next pass has to wait, or a bend has to happen while the metal is still hot enough to move without cracking. A temperature stick for welding gives a plain answer to a plain question: is this metal hot enough yet. The stick looks like a crayon, and it marks the surface with a chalky line that melts when the surface reaches the rated temperature. This guide explains how the mark works, how to pick a rating, and how to use a stick step by step on a weld.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

What a temperature stick does, in one paragraph

A temperature stick for welding is a crayon-like stick filled with a material that melts at a set temperature. Mark the metal, heat the metal, and watch the mark: while the surface stays below the rated temperature the mark stays dull and chalky, and when the surface reaches the rated temperature the mark melts to a transparent-appearing liquid. The change is easy to see, the stick needs no batteries and no gauge to read, and the mark tells whether the metal has reached the rated temperature or not.

Side by side

150 F 200 F 250 F 300 F 350 F 400 F 600 F
Part number 86463 86517 86562 86625 86697 86733 86841
Length 5 in 5 in 5 in 5 in 5 in 5 in 5 in
Accuracy +/- 1 percent of rated temperature +/- 1 percent of rated temperature +/- 1 percent of rated temperature +/- 1 percent of rated temperature +/- 1 percent of rated temperature +/- 1 percent of rated temperature +/- 1 percent of rated temperature
Item weight 0.01 lb 0.08 lb 0.08 lb 0.08 lb 0.04 lb 0.08 lb 0.04 lb

The table lists the Markal Thermomelt sticks (on Amazon) in the listings, from the 150 F stick to the 600 F stick, with part numbers, length, accuracy and weight for each. Every stick in the table is 5 in long and accurate to within +/- 1 percent of its rated temperature, so the rating is the main difference between them. Markal also lists a 700 F stick, part number 86868, for work that needs a higher rating. Several listings describe the stick as 33 percent bigger and stronger, with the same proven reliability.

When a temperature stick is the better choice

  • Checking preheat before a weld. Mark the joint, heat it, and the melting mark shows the metal has reached the rated temperature.
  • Annealing, forging, bending and forming. The listings name these jobs as uses for the stick, and the mark is made on the metal itself.
  • Work away from power. The stick needs no batteries and no outlet, so it works in the yard or on a job site.
  • A quick pass or fail check. The mark either melts or it does not, which suits a fast check before a weld or a bend.

The stick suits work where a pass or fail mark is enough. For choosing the welder itself, see the how to choose a MIG welder guide.

When a gauge is the better choice

  • Reading an exact temperature. A stick shows only whether the surface has reached its rating, while a gauge shows the reading as it climbs.
  • Watching heat fall. A stick marks a single rating, so it cannot show a surface cooling through a range.
  • Checking a rating between the sticks listed. The listings run from 150 F to 700 F, so a rating between listed ratings is not covered by the sticks listed; a gauge can read it directly.

How to use a temperature stick for welding

Work through the steps in order, and mark the metal close to where the heat matters.

  1. Pick the rating for the job. Markal lists sticks rated at 150 F, 200 F, 250 F, 300 F, 350 F, 400 F, 600 F and 700 F, so choose the rating the job calls for.
  2. Mark the metal near the weld or the bend. Draw a short line with the stick on clean metal close to where the heat matters.
  3. Heat the metal and watch the mark. While the surface stays below the rating, the mark stays dull and chalky.
  4. Read the melt. When the surface reaches the rated temperature, the mark quickly melts to a transparent-appearing liquid, and the surface has reached the rating.
  5. Mark again if the metal cools. A fresh mark shows whether the surface is still at the rating before the next pass.

Keep the stick dry when it is not in use, and keep the mark on bare metal, not on paint or scale, so the melt is easy to see.

Which rating for welding

The rating depends on the job, not on the stick. Markal lists sticks from 150 F to 700 F, and the listings name welding, annealing, forging, bending and forming as uses. Pick the rating the job calls for: a low rating for work that needs only gentle heat, and a higher rating for work that needs the metal hotter. The 300 F stick, part number 86625, and the 400 F stick, part number 86733, sit between the low ratings and the hot ones, while the 600 F stick, part number 86841, and the 700 F stick, part number 86868, cover hotter work.

Can one stick cover every job?

No. Each stick melts at its own rating, so a 150 F stick cannot show whether metal has reached 400 F, and a 700 F stick cannot show whether metal has reached 200 F. For work across a wide range of heat, keep the ratings the job calls for on hand, and mark with the rating that matches the step in front of you.

Hot metal and fumes. Heated metal burns on contact, and welding fumes need fresh air. Wear gloves and a helmet, keep the work area clear of anything flammable, and weld with good ventilation or outdoors with your head out of the plume.

For more options, see our metal fab tools guides.

FAQ for welders

What is a temperature stick for welding?

A temperature stick for welding is a crayon-like stick that marks metal with a line that melts when the surface reaches the rated temperature. The mark starts dull and chalky, then melts to a transparent-appearing liquid at the rating. Markal lists sticks rated from 150 F to 700 F.

How accurate is a temperature stick?

Markal states the sticks are accurate to within +/- 1 percent of the rated temperature. The mark melts at the rating, so the reading is a pass or fail mark rather than an exact number.

How long is a temperature stick?

The Markal Thermomelt sticks (on Amazon) in the listings are 5 in long. The 300 F stick, part number 86625, lists a 5 in length, as does the 700 F stick, part number 86868.

What jobs suit a temperature stick?

The listings name annealing, forging, welding, bending and forming as uses. The stick suits any job where a pass or fail mark at a set rating is enough, and where a gauge is not needed.

How do I pick the right rating?

Pick the rating the job calls for from the listings: 150 F, 200 F, 250 F, 300 F, 350 F, 400 F, 600 F or 700 F. Keep the ratings the job calls for on hand, and mark with the rating that matches the step in front of you.

Related: how to choose a MIG welder, what flux core wire is, and the how to stick weld rusty metal guide.

More buying guides