Best Transfer Punch Set (2026): 5 Sets, Scored
Five transfer punch sets compared by piece count, size range, undersize fit, steel and finish, and index stand, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHHIP 8600-00419.7/10View on Amazon - 2
Best MetricHHIP 8600-0043 Metric9.6/10View on Amazon - 3
Plain Imperial PickXtremepowerUS 28-Pc9.6/10View on Amazon - 4
Stated Fit, Random StandUI PRO TOOLS 28-Pc9.5/10View on Amazon - 5
Most Pieces on PaperCentral Tools CEN3S301B9.5/10View on Amazon
A transfer punch drops into an existing hole and marks dead center on the part underneath, so the second hole lands exactly where the first one is. The best transfer punch set is the one that covers every size you drill, fits snug without slop, and comes in an index stand that keeps every punch sorted. We compared transfer punch sets on piece count, size range, undersize fit, punch length, steel and finish, and the stand, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall HHIP 8600-0041: 28 punches 3/32 to 1/2 by 64ths plus 17/32, 0.0025 in undersize, 4-7/8 in long, metal index stand Check price on Amazon
- Best Metric HHIP 8600-0043 Metric: 25 punches 1 to 13 mm in 0.5 mm steps, 4-7/8 in long, black oxide, stand included Check price on Amazon
- Plain Imperial Pick XtremepowerUS 28-Pc: 28 punches 3/32 to 1/2 in 1/64 increments plus 17/32, heat treated alloy steel, index stand Check price on Amazon
- Stated Fit, Random Stand UI PRO TOOLS 28-Pc: 28 punches with 0.0025 in undersize, but the holder ships plastic or metal at random Check price on Amazon
- Most Pieces on Paper Central Tools CEN3S301B: 32 pieces per the title, but the bullets describe the 28-punch spread Check price on Amazon
The machines

HHIP 8600-0041 28-Piece Transfer Punch Set
A 28-piece set from 3/32 to 1/2 inch by 64ths plus 17/32, undersized 0.0025 inch, 4-7/8 inches long, in a metal index stand.
Pros
- 28 punches covering 3/32 to 1/2 inch by 64ths plus 17/32
- 0.0025 inch undersize stated for a snug slip fit
- 4-7/8 inch length stated for handling and control
- Hardened tool steel with black oxide finish in a labeled metal index stand
Cons
- No warranty term is stated
- Needs through holes; blind hole spotters are sold separately
- No metric sizes; the HHIP 8600-0043 covers that separately

HHIP 8600-0043 25 Piece 1-13mm Metric Transfer
A 25-piece metric set from 1 to 13 mm in 0.5 mm increments, 4-7/8 inches long, in a stand.
Pros
- 25 punches from 1 to 13 mm in 0.5 mm steps, the only metric set here
- 4-7/8 inch punch length stated for handling and control
- Heat treated tempered tool steel with black oxide finish
- Stand included for organization and quick access
Cons
- No warranty term is stated
- No undersize fit figure is stated
- 2.86 lb set weight with no per-piece detail
- No fractional sizes; pair with an inch set for mixed work

XtremepowerUS 28-Piece Transfer Punch Set
A 28-piece set from 3/32 to 1/2 inch in 1/64 inch increments plus 17/32, in heat treated alloy steel with an index stand.
Pros
- 28 punches 3/32 to 1/2 inch in 1/64 increments plus 17/32
- Heat treated alloy steel with black oxide finish
- Index stand holder included for organization
- Hand powered operation; nothing to plug in or charge
Cons
- No warranty term is stated
- No punch length is stated
- No undersize fit figure is stated
- No per-punch dimensions; only 3 x 6 x 5.4 inch product dimensions

28pc Center Transfer Punches Set Machinists Tool
A 28-piece center transfer punch set from 3/32 to 1/2 inch by 64ths plus 17/32, undersized 0.0025 inch.
Pros
- 28 punches 3/32 to 1/2 inch by 64ths plus 17/32
- 0.0025 inch undersize stated for a snug slip fit
- Heat treated tempered tool steel with black industrial oxide finish
- 3.5 lb set weight stated
Cons
- No warranty term is stated
- Stand material ships at random, plastic or metal, per the bullets
- No punch length is stated
- Title mixes center punch and transfer punch naming

Central Tools CEN3S301B Transfer Punch Set,32
A 32-piece transfer punch set listing 3/32 to 1/2 inch by 64ths plus 17/32, heat treated and tempered, with an indexed stand.
Pros
- 32 pieces per the title and spec table, the most here
- Heat treated and tempered steel stated
- Indexed stand included
- 6 lb item weight stated, the heaviest set here
Cons
- No warranty term is stated
- Bullets describe 28 punch sizes against the 32-piece title
- No punch length or undersize figure is stated
Other welders and gear to compare
Fowler 52-500-015-0Check price on Amazon
HORUSDY 28-Piece Transfer Punch SetCheck price on Amazon
28 Piece Transfer Punch Set 3/32"-1/2" by 64ths Plus 17/32"Check price on Amazon
TTC 33 Piece Transfer Punch SetCheck price on Amazon
HORUSDY 28-Piece Heavy Duty Punch and Chisel SetCheck price on Amazon
Spec sheet comparison
| Set | Gear Score | Pieces | Range | Undersize | Length | Stand |
|---|---|---|---|---|---|---|
| HHIP 8600-0041 | 9.7/10 | 28 | 3/32 to 1/2 in + 17/32 | 0.0025 in | 4-7/8 in | Metal index |
| HHIP 8600-0043 Metric | 9.6/10 | 25 | 1 to 13 mm | Not stated | 4-7/8 in | Stand included |
| XtremepowerUS 28-Pc | 9.6/10 | 28 | 3/32 to 1/2 in + 17/32 | Not stated | Not stated | Index stand |
| UI PRO TOOLS 28-Pc | 9.5/10 | 28 | 3/32 to 1/2 in + 17/32 | 0.0025 in | Not stated | Plastic or metal, random |
| Central Tools CEN3S301B | 9.5/10 | 32 | 3/32 to 1/2 in + 17/32 | Not stated | Not stated | Indexed stand |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 October 2026.
Buying guide: the best transfer punch set for a fab shop
What a transfer punch does
Drop the punch into a drilled or tapped hole in the template part, set the mating part against it, and tap the punch with a hammer. The point marks center on the blank. Drill there and the holes line up. That is the whole job, and it beats laying out every hole by hand. Note the HHIP listing’s warning: transfer punches need through holes, and blind hole spotters are sold separately.
Size range and increments
Four of the five here cover 3/32 to 1/2 inch in 1/64 inch increments plus the handy 17/32 punch, the standard fractional spread for layout work. The HHIP 8600-0041 and the XtremepowerUS both list 28 pieces on that spread. The Central Tools lists 32 pieces for the same stated spread, which does not add up; see its review. The fifth set, the HHIP 8600-0043, is the metric option at 25 pieces from 1 to 13 mm in 0.5 mm steps. Pick the set that matches the fasteners you actually drill for.
The 0.0025 inch undersize detail
Two listings state the punches are undersized by 0.0025 inch for a snug slip fit in drilled holes. That matters because a punch that rattles in the hole marks off center. The HHIP 8600-0041 and the UI PRO TOOLS both state it; the other three do not mention fit at all. When two listings are otherwise equal, the stated undersize is the tiebreaker.
Steel, finish and the index stand
All five list heat treated steel, most with a black oxide finish for rust resistance. Punch length is stated on two: both HHIP sets list 4-7/8 inches, which the listing calls out for handling and control. Every set includes an index stand, but read the fine print: the UI PRO TOOLS bullets say the holder may be plastic or metal and ships at random. If the stand matters to your bench, that is a real difference. Two related layout tools worth knowing are the center punch and the metal scribe, since layout starts before any hole gets transferred.
Imperial or metric
Four sets here are fractional inch and one is metric, and they do not substitute for each other. If your fasteners are SAE, the 28-piece inch sets cover 3/32 to 1/2 by 64ths plus 17/32. If you drill metric hardware, the HHIP 8600-0043 covers 1 to 13 mm in 0.5 mm steps. Shops that see both keep one of each, and the index stands keep the two systems from mixing on the bench.
Use as directed. Strike the punch with a hammer, never with another hardened tool, and wear eye protection; hardened tips can chip. Keep the index stand closed or upright so loose punches do not roll off the bench, and store the set dry so the black oxide finish keeps resisting rust.
Before You Strike an Arc
- Count the punches on arrival: 28 in the HHIP 8600-0041, XtremepowerUS and UI PRO TOOLS sets, 32 in the Central Tools set, 25 in the metric HHIP.
- Check that the 17/32 punch is in the index; it is the odd size every inch listing calls out.
- Confirm the fit on a scrap hole before marking a real part, since only two listings state the 0.0025 inch undersize.
- Remember transfer punches need through holes; the HHIP listing notes blind hole spotters are sold separately.
- Check the UI PRO TOOLS stand on arrival, since its bullets say the holder material ships at random.
FAQ for welders
What is a transfer punch?
A transfer punch is a straight, hardened steel punch sized to slip into an existing hole. You set the mating workpiece against the holed part and strike the punch, and its point marks the exact center on the blank. That mark is where you drill the matching hole.
What is a transfer punch set?
A transfer punch set is a full range of these punches in small size steps, held in an indexed stand. The imperial sets here run 28 pieces from 3/32 to 1/2 inch by 64ths plus 17/32; the metric set runs 25 pieces from 1 to 13 mm. One set covers the common drilled and tapped hole sizes in a shop.
How does a transfer punch work?
The punch body fits the existing hole with a close slip fit, which centers it on its own. A light hammer tap drives the point into the mating part and leaves a center mark. Drill on that mark and the two holes line up for the fastener.
What is the purpose of a transfer punch?
It duplicates a hole pattern from one part to another without measuring. That is the fast way to match bolt circles, mounting plates and brackets. The alternative is laying out every hole by hand, which is slower and easier to get wrong.
Which set here covers metric sizes?
The HHIP 8600-0043: 25 pieces from 1 to 13 mm in 0.5 mm increments, 4-7/8 inches long, heat treated tempered tool steel with a black oxide finish, in a stand. The other four are fractional inch sets, so this is the one for metric hardware.
Related: best center punch for hardened steel, best metal scribe, black oxide vs cobalt drill bits, and the metal fab tools hub.
Scoring, line by line
Each set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Transfer punches are hand tools with no electrical safety listing to state, so every set here scores zero on that criterion, and none of the five states a warranty term either. The ranking comes from piece count, size range, stated fit and finish, and how complete and consistent the listing is.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HHIP 8600-0041 | 9.7 | 32 | 21 | 21 | n/a | 0 |
| HHIP 8600-0043 Metric | 9.6 | 29 | 21 | 21 | n/a | 0 |
| XtremepowerUS 28-Pc | 9.6 | 28 | 20 | 21 | n/a | 0 |
| UI PRO TOOLS 28-Pc | 9.5 | 28 | 19 | 20 | n/a | 0 |
| Central Tools CEN3S301B | 9.5 | 27 | 19 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




