Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Transfer Punch vs Center Punch: Which One Should You Buy?

A transfer punch copies an existing hole's center onto a mating part; a center punch marks where to drill. When to use each, and four transfer punch sets compared.

Transfer Punch vs Center Punch: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HHIP 8600-0041 28-Piece Transfer Punch SetHHIP 8600-0041 28-Piece Transfer Punch Set9.7/10View on Amazon
  2. 225-Piece Punch and Chisel Set with Roll Pin Punches25-Piece Punch and Chisel Set with Roll Pin Punches9.7/10View on Amazon
  3. 328 Piece Transfer Punch Set 3/32"-1/2" by 64ths Plus 17/32"28 Piece Transfer Punch Set 3/32"-1/2" by 64ths Plus 17/32"View on Amazon
  4. 4HHIP 8600-0043 25 Piece 1-13mm Metric Transfer Punch SetHHIP 8600-0043 25 Piece 1-13mm Metric Transfer Punch SetView on Amazon
  5. 5HHIP 33 Piece & 28 Piece Transfer Punch Sets Brand: HHIPHHIP 33 Piece & 28 Piece Transfer Punch Sets Brand: HHIPView on Amazon
  6. 6TTC 33 Piece Transfer Punch SetTTC 33 Piece Transfer Punch SetView on Amazon
  7. 7NEIKO 02639A 6-Inch Automatic Center Hole Punch withNEIKO 02639A 6-Inch Automatic Center Hole Punch withView on Amazon
  8. 8Starrett Steel Center PunchStarrett Steel Center PunchView on Amazon

A transfer punch copies the location of an existing hole; a center punch marks the spot for a hole you have not drilled yet. That is the whole difference in transfer punch vs center punch: one transfers a hole pattern from one part to another, the other gives your drill bit a starting dimple so it does not wander. This guide explains when to reach for each, and compares four transfer punch listings for metal fab work.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one paragraph

A transfer punch is sized to slip into an existing hole: you drop it in, strike the end, and its point marks the exact center on the mating part. That is how the listings describe it: taking the guesswork out of transferring threaded, drilled or reamed holes for accurate drilling. A center punch does the opposite job: you place its point where the new hole goes and strike it to dimple the metal, giving the drill bit a seat. Use a transfer punch to copy; use a center punch to start.

Transfer punch vs center punch, side by side

Transfer punch Center punch Takeaway
Job Copies an existing hole’s center onto a mating part Marks a starting dimple for a new hole Different jobs entirely
How it is used Dropped into the hole, then struck Point placed on the mark, then struck Same strike, different placement
Sizing Matched to the hole: sets here run 3/32″ to 1/2″ by 1/64″, plus 17/32″ One size marks any start point Transfer needs a set; center needs one
Typical shop job Transferring threaded, drilled or reamed holes to a mating plate Starting drilled holes before the bit touches Copy a pattern vs start a hole
Sets in this guide 28 and 33 piece sets; index stand on the 28 piece sets Not covered here Sets are transfer punches
Single-tool option Self-centering aligner covers 1/4″ to 5/8″ Not covered here One tool for the 1/4 to 5/8 in range

Transfer punch sizes match the hole they fit: the sets in this guide run 3/32″ to 1/2″ by 1/64″ and 1/2″-1″ by 1/64th, so match the set to the holes you drill most. A center punch needs no such matching: one punch marks any starting point.

When a transfer punch is the better choice

  • Copying a bolt pattern. Drop the punch in each existing hole and transfer the pattern to the mating plate in one pass.
  • Matching drilled or reamed holes. The listings describe exactly this: transferring threaded, drilled or reamed holes for accurate drilling.
  • Working with a full set. A 28 or 33 piece set covers the common hole sizes; the 28 piece sets include an index stand to keep them sorted.
  • One tool instead of a set. The self-centering aligner covers 1/4″ to 5/8″ with a hardened EN31 pin, per its listing.

When a center punch is the better choice

  • Starting a new hole. A dimple keeps the drill bit from walking on the first touch.
  • Layout work. Marking hole centers from a drawing before any hole exists.
  • One punch does it all. No set to buy and no size to match; the same punch marks any starting point.
  • Quick marks. For a single new hole, a center punch is the faster tool: no set to search through.

The transfer punch sets we compared

The transfer punch sets compared here are the LLDSIMEX 28 piece set: 3/32″ to 1/2″ by 1/64″ plus a 17/32″ punch, heat treated tempered tool steel, 4.87 inches long, with an easy-to-see index stand. The Generic 33 piece set: 1/2″-1″ by 1/64th, 4-7/8″ long, finest tool steel with a black oxide finish and clearly marked sizes, though the set weighs 22 LBS. The VCT 28 piece set: 3/32″ to 1/2″ in heat-treated alloy steel with a black oxide finish, 4 7/8″ long, 3.54 pounds with its stand. The ASSORTS self-centering aligner: a single tool covering 1/4″ to 5/8″, with a heat-treated EN31 hardened pin, knurled body and CNC machined construction, for shops that want one tool instead of a set.

Wear safety glasses when striking any punch: a glancing hammer blow can chip steel. Clamp the work so it cannot shift, keep fingers clear of the strike zone, and check the punch tip for mushrooming before use. See the OSHA welding overview for shop safety guidance.

FAQ for welders

Can I use a transfer punch as a center punch?

You can in a pinch, but the point profile differs: a transfer punch is made to sit in a hole, while a center punch is made to dimple flat stock. For clean layout work, use each punch for its own job.

What size transfer punch do I need?

Match the punch to the hole: the 28 piece sets here run 3/32″ to 1/2″ by 1/64″, and the 33 piece set runs 1/2″-1″ by 1/64th. Buy the range that covers the holes you drill most.

Do I need a full transfer punch set?

Not always. A full set suits a shop that copies many hole sizes; the self-centering aligner in this guide covers 1/4″ to 5/8″ with one tool. If you only transfer a few sizes, a smaller set or the aligner does the job.

How do you transfer a bolt pattern with a transfer punch?

Clamp the template part over the blank, drop the matching transfer punch into each hole, and strike it to mark the centers. Then drill the blank on the marks. The index stand in the 28 piece sets keeps the sizes sorted between holes.

Why does my transfer punch wobble in the hole?

The punch is the wrong size for that hole. Transfer punches must fit snugly; the sets here step by 1/64″, so pick the punch that just slides in. A loose punch marks off center.

Related: best center punch for hardened steel, best center punch tool, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

How to Use Center Punch on Metal

How to use a center punch to mark an exact starting spot for drilling, with the steps and the 4 punch sets that cover…