How to Cut Metal Wire: Tools and Methods
How to cut metal wire: match the cutter to the wire, mark the cut, hold the wire steady, and squeeze the jaws square for a clean end.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
WORKPRO 6” Wire Cutters Heavy Duty CRV Steel9.6/10View on Amazon - 2
WORKPRO Mini Bolt Cutter 8-inch9.6/10View on Amazon
A length of wire on the bench needs to come off clean, and how to cut metal wire comes down to matching the tool to the wire: diagonal pliers for the light cuts, the mini bolt cutter for wire past what the pliers handle, and a steady hold so the cut lands where you marked it.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

WORKPRO 6” Wire Cutters Heavy Duty CRV Steel
Side-cutting pliers for cutting wire, with hardened edges and a comfort grip for the bench work in this guide.
Pros
- 50CrV steel with heat treated, blackened surface
- Hardened cutting edges for increased cutting ease
- Bi-material handle for anti-slip and comfort grip
- Hardness stated up to 48 HRC, and up to 65 HRC with high-frequency treatment
Cons
- No warranty term is stated
- No maximum wire size is stated
- No handle lock is stated for storage

WORKPRO Mini Bolt Cutter 8-inch
Spring loaded mini bolt cutter that handles wire and cable up to the stated 2.3 mm capacity.
Pros
- Drop forged steel, heat treated, up to 65 HRC
- Stated max cutting capacity of 2.3 mm
- Spring loaded design with a built-in handle lock
- PP+TPR rubber handles for anti-slip grip
Cons
- No warranty term is stated
- Cutting locks is not recommended, per the listing note
- No spare blades are listed in the box
How to cut metal wire
Start by matching the tool to the wire. Diagonal pliers cut wire cleanly at the jaws, and the mini bolt cutter takes thin wire and cable up to its stated 2.3 mm, with leverage doing the work. Mark the cut, hold the wire steady, and cut with the jaws square to the wire. The steps below walk through it, and the gear section names the 2 cutters the listings describe.
Side by side
| Gear Score | Length | Max cutting capacity | Notes | |
|---|---|---|---|---|
| WORKPRO 6 in. Diagonal Cutters | 9.6/10 | 6 inch | Not stated | Diagonal pliers for wire |
| WORKPRO 8 in. Mini Bolt Cutter | 9.6/10 | 8 inch | 2.3 mm | Spring loaded, handle lock |
The listings differ in size and handle, and only the bolt cutter states a cutting capacity. The WORKPRO diagonal pliers are a 6 inch tool in 50CrV steel, and the WORKPRO mini bolt cutter is an 8 inch spring loaded tool with a stated 2.3 mm cutting capacity. Match the cutter to the wire before you buy.
Step 1: Measure and mark the cut
Measure the length you need and mark the wire at the cut point, with a marker or a wrap of tape so the mark stays visible while you cut. A clear mark keeps the cut where you want it, and it lets you check the length before the jaws close.
Step 2: Hold the wire steady
Clamp the wire or the work it runs through so it cannot move while you cut. A wire that shifts under the jaws gives a ragged cut and can throw the cut end. Wear safety glasses before you cut, since a cut end can fly when the jaws close. See the safety glasses guide for eye protection that fits cutting work.
Step 3: Cut thin wire with diagonal pliers
Set the wire deep in the jaws of the diagonal pliers and squeeze the handles in a smooth motion. The WORKPRO pliers list hardened cutting edges and a bi-material handle for anti-slip grip, with hardness up to 48 HRC and up to 65 HRC with high-frequency treatment. Keep your fingers clear of the jaws and let the cut end fall clear.
Cut wire past the pliers with the bolt cutter
For wire past what the pliers handle, use the bolt cutter. The WORKPRO mini bolt cutter states a max cutting capacity of 2.3 mm, with drop forged steel up to 65 HRC and a built-in handle lock for storage. Set the wire between the blades, squeeze the handles with a steady grip, and check the cut end before you move on. The listing notes cutting locks is not recommended. See the best hand held bolt cutters roundup for more sizes.
Gear for the cutting steps
The 2 cutters below cover the steps above: diagonal pliers for wire at the bench, and a spring loaded bolt cutter for wire and cable up to the stated 2.3 mm.
Work safe
Cut wire ends fly, so wear safety glasses whenever the jaws close. Clamp the work so it cannot move, keep your fingers clear of the jaws, and wipe the pliers before using them and store them dry. Store the bolt cutter with its handle lock on.
FAQ for welders
What tool cuts metal wire?
Diagonal pliers for wire at the bench, and the mini bolt cutter for wire and cable up to its stated 2.3 mm. The WORKPRO diagonal pliers list hardened edges for wire cuts, and the WORKPRO mini bolt cutter states a 2.3 mm max cutting capacity.
Can diagonal pliers cut thick wire?
The diagonal pliers listing states no maximum wire size. When the wire is past what the pliers cut cleanly, use the bolt cutter if the wire is within its stated 2.3 mm max cutting capacity.
How do I get a clean cut?
Set the wire deep in the jaws, hold it steady, and squeeze in a smooth motion. A dull or nicked edge tears the wire instead of cutting it, so check the edges before you cut.
What is the max cutting capacity of the WORKPRO mini bolt cutter?
The listing states 2.3 mm. It also notes cutting locks is not recommended.
Do I need safety glasses to cut wire?
Yes. A cut end can fly when the jaws close, so wear safety glasses whenever you cut wire.
Related: best hand held bolt cutters, bolt cutters vs hacksaw for metal, best bolt cutter and pliers set and the metal fab tools hub.




