Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Powder Coating Gun Parts Explained

Powder coating gun parts work as a set, with the gun, powder supply, nozzle, ground lead, control unit and air supply each shaping how powder leaves the gun and lands on metal.

Powder Coating Gun Parts Explained
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Eastwood HotCoat 100kV Powder Coating Gun SystemEastwood HotCoat 100kV Powder Coating Gun System9.6/10View on Amazon
  2. 2Eastwood HotCoat PCS-250 Powder Coating Gun Plus BenchtopEastwood HotCoat PCS-250 Powder Coating Gun Plus Benchtop9.6/10View on Amazon
  3. 3Powder Coating Gun System for MetalPowder Coating Gun System for Metal9.5/10View on Amazon

A bracket comes off the bench with bare metal showing through a thin, patchy coat, and the next coat needs to land even and stay put. Powder coating gun parts decide that result, because each part controls how powder gets charged, how it leaves the gun, and how it sticks to grounded metal. This guide names each part, explains what it does, and shows what to check when the coat looks uneven, thin in corners, or heavy in flat areas.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Powder coating gun parts in plain terms

A powder coating gun is a small system, not a lone spray tool. Powder sits in a cup or a hopper, air moves it toward the gun, the gun gives the powder an electric charge, and the charged powder is drawn to metal that is connected to a ground lead. When a coat fails, the fault is often in a part that looks minor, such as a worn nozzle, a loose ground clamp, or a hose that leaks air. Names vary by maker, so match a part by its job. See the powder coating gun for beginners guide.

Side by side

Part What it does What to check Figures from maker listings
Gun Charges powder and sprays it at grounded metal Trigger, cables, clean charging parts 15,000-volt, 25,000-volt, 0-40 kVDC, 0-90 kV and 100 kV settings across the listings
Powder cup or hopper Holds powder and feeds it to the gun Cup level and flow; hopper lid and seal 8-oz bottle, 11.16 oz cup, 700ml hopper, 45L tank
Nozzles and deflectors Shape the spray pattern Fit, wear and pattern shape Interchangeable nozzles and deflectors
Ground clamp and lead Gives powder a path to grounded metal Clean jaws, firm grip on bare metal Larger ground clamp; dedicated grounding lead
Control unit Sets voltage, current and air flow Knob labels and the OFF/ON switch 0-40 kVDC and 10-50 μA; 90-260V, 50/60HZ
Hoses and air fittings Carry powder and air to the gun Hose fit, kinks and air leaks 12.1 foot hose, 12 foot tubing, 1/4 inch FNPT inlet

The gun, the powder cup and the hopper

The gun is the part in the hand. It holds the trigger, the charging parts and the nozzle, and it connects to the powder supply, the power lead and the air hose. The Eastwood HotCoat listing states voltage and amperage from 0-40 kVDC and 10-50 μA, with pulsed charge technology for recesses, corners and tight areas, while the Eastwood PCS-150 listing states a 15,000-volt setting and operation on standard 120v / 60Hz household current.

The powder cup or hopper feeds powder to the gun. A cup screws onto the gun and suits small parts and color changes, while a hopper feeds powder through a hose for longer runs. The PCS-150 listing includes an empty 8-oz clear bottle, and the clear bottle lets the reader see powder color, level and fluidizing action. The PCA-305 listing states a large 11.16 oz powder cup, the WX-258 listing states a powder hopper volume of 700ml, and the WX-958S listing states a 45L powder tank in stainless steel, with dimensions of 44.5X39.5X56.5CM and a weight of 18.5KG. The HotCoat 40KV system listing states an item weight of 13.0 pounds, and the WX-258 listing states 6.62 pounds. See the best powder coating gun for home use guide.

Nozzles, deflectors and spray pattern

The nozzle shapes the spray as powder leaves the gun. A fan-shaped pattern covers flat panels, while a diffusion nozzle spreads powder into corners, grooves and recesses. The WX-958S listing states interchangeable nozzles for diffusion and fan-shaped coatings, and the HotCoat listing states interchangeable deflectors that tailor the spray pattern for parts of varying size. A nozzle that is worn, clogged or cracked changes the pattern, so a coat that was even can turn patchy with no change in settings. Voltage also changes how powder is drawn to the part: the PCS-250 listing states a low 15,000-volt setting and a high 25,000-volt setting, the PCA-305 listing states a high 100 kV electrostatic charge, and the WX-258 listing states an output voltage of 0-90kV. Keep spares that fit the exact gun model.

Power, ground and air supply

The control unit supplies power to the gun and sets the charge. The WX-958S listing states an adjustable control panel, with knobs for powder, air, rinsing air, kV and uA, plus an OFF/ON switch, and power compatibility of 90-260V, 50/60HZ. The EQCOTWEA listing states a 110V machine with a precise control system. A knob turned the wrong way can starve the gun of powder or flood it.

The ground lead is as important as the gun. Powder needs grounded metal to attract it, so the ground clamp must grip bare metal with a firm bite. The HotCoat listing states a dedicated grounding lead for stable charge and consistent results, and the PCS-150 listing states a larger ground clamp. A clamp on paint, rust or oil gives a weak path. Air comes from a shop compressor: the HotCoat listing states a standard 1/4 inch FNPT air inlet, a 12.1 foot powder feed hose and 12 foot air tubing, and the WX-958S listing states an integrated oil-water separator that filters water, oil and cleans gas from the compressor. Wet or oily air clumps powder, so drain the compressor and check the separator before a run.

What wears out and what to keep on hand

Nozzles, deflectors, hoses and seals wear with use and with cleaning. Keep a spare nozzle and deflector set, a spare powder cup or bottle, and hose fittings that match the gun. The PCS-150 listing states an 8 ounce bottle in the box. Warranty terms differ: the PCS-150 listing states a 1-year limited warranty and 90-day return, the PCS-250 listing states a 1 year warranty, and the PCA-305 listing states a 1 year manufacturer warranty. Store powder dry and sealed, and keep the gun clean after use. For related parts, see the powder coating oven parts guide, and browse the powder coating gun parts hub.

FAQ for welders

What part controls how much powder leaves the gun?

The control unit sets that job. Knobs for powder and air set the flow, and the voltage setting sets the charge that draws powder to the metal.

Why does powder fall off the part before baking?

A weak ground is a common cause. The ground clamp must grip bare metal, and the lead must be intact from the control unit to the clamp.

Can a powder cup from another gun fit this gun?

Not always, even when the cup looks the same. Cup sizes differ, with an 8-oz bottle on the PCS-150 listing and an 11.16 oz cup on the PCA-305 listing. Match the cup to the gun model and part number.

When should a nozzle or deflector be replaced?

Replace a nozzle or deflector when the pattern changes, the coat turns patchy, or the part shows wear, cracks or clogging that cleaning does not clear.

Does a powder coating gun need a separate air supply?

Yes, the gun needs air from a shop compressor. The HotCoat listing states a standard 1/4 inch FNPT air inlet.

What does the oil-water separator do?

The separator sits in the air path and removes water and oil that come from the compressor before they reach the gun. The WX-958S listing states that it filters water, oil and cleans gas from the compressor.

Related: powder coating gun for beginners, how to remove powder coating from metal, HVLP vs powder coating gun, and the metal fab tools hub. Also see the how hot does a powder coating oven need to be guide.

More buying guides

Metal Fab Tools ·

Best Powder Coating Gun for Home Use (2026)

Three powder coating gun systems for home use, compared on voltage, hopper size, oven and booth, warranty and the coverage each listing states.