Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Angle Grinder vs Rotary Tool: Which One Should You Buy?

The Milwaukee 2880-20 angle grinder and the Fanttik F2 PRO rotary tool serve different jobs, and the listings draw a clear line between disc grinding and fine detail work.

Angle Grinder vs Rotary Tool: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Milwaukee 2880-20 M18 Fuel Brushless Lithium-IonMilwaukee 2880-20 M18 Fuel Brushless Lithium-Ion9.6/10View on Amazon
  2. 2Fanttik F2 PRO Cordless Rotary Tool KitFanttik F2 PRO Cordless Rotary Tool Kit9.4/10View on Amazon

Verdict. Pick the angle grinder side for disc grinding work and the rotary tool side for fine detail work. The Milwaukee example brings a cordless grinder built around discs, while the Fanttik example brings a kit built around small accessories. The choice turns on the size of the job at hand.

A shop day can split in different directions: a weld bead that needs blending back, a rusted edge that needs cleaning, or a small part that needs a careful slot. Angle grinder vs rotary tool is the question that follows, because the two tools look related and work differently. This comparison puts the Milwaukee angle grinder example against the Fanttik rotary tool example on what each listing states, and leaves unclear what neither listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The two tools

Milwaukee 2880-20 M18 Fuel Brushless Lithium-Ion

Milwaukee 2880-20 M18 Fuel Brushless Lithium-Ion

Milwaukee9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cordless M18 Fuel brushless small angle grinder for 4-1/2 in. and 5 in. discs, with a no-lock paddle switch, electronic clutch for kickback protection and an anti-vibration side handle.

Pros

  • Electronic clutch for kickback protection and overload protection
  • Anti-vibration side handle for user comfort and safety
  • Compatible with all M18 batteries
  • 5/8"-11 spindle for use with common grinding accessories

Cons

  • Warranty term not stated beyond Manufacturer Warranty
  • Tool only listing; no battery is named as included
  • No speed figure is stated in the listing
  • Box contents are unclear: the title says tool only while the spec table points another way
Fanttik F2 PRO Cordless Rotary Tool Kit

Fanttik F2 PRO Cordless Rotary Tool Kit

Fanttik9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cordless rotary tool kit with 5 speeds from 5,000-25,000 RPM, a 3,000mAh battery, a magnetic accessory hub and 55 accessories for sanding, polishing, drilling, carving and cutting.

Pros

  • 5 speeds from 5,000-25,000 RPM, from fine grinding to coarse cutting
  • 55 accessories in a magnetic holder and aluminum alloy case
  • 3,000mAh battery with up to 20-120 minutes of use
  • Front shadow-free LED light and a power indicator that turns red below 30% battery

Cons

  • No warranty term is stated in the listing
  • Listing names plastic, wood and soft metal only
  • Runtime depends on the material and the speed applied
  • No heavy steel work is named in the listing

Other welders and gear to compare

Side by side

Milwaukee 2880-20 Angle Grinder Fanttik F2 PRO Rotary Tool Notes
Gear Score 67 56 Angle grinder
Tool type Cordless small angle grinder Cordless rotary tool kit Different jobs
Discs and accessories 4-1/2 in. / 5 in. discs 55 accessories in magnetic holder and case Discs against small accessories
Speed Not stated 5,000-25,000 RPM Only the rotary tool listing states a range
Battery M18 system, compatible with all M18 batteries; capacity not stated 3,000mAh, 20-120 minutes of use Runtime stated only for the rotary tool example
Weight 4.99 Pounds 0.49 Pounds Both listings state a figure
Warranty Manufacturer Warranty, no term stated Not stated No term stated for either example

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 29 October 2026. Neither listing states a warranty term, and only the rotary tool listing states a speed range.

Angle Grinder vs Rotary Tool: Power and Size

The Milwaukee example is a cordless M18 Fuel brushless small angle grinder with a no-lock paddle switch, made for 4-1/2 in. and 5 in. discs on a 5/8″-11 spindle. The listing states compatibility with all M18 batteries, and the tool-only title means no battery is named as included. An electronic clutch for kickback protection, overload protection and an anti-vibration side handle round out the stated features.

The Fanttik example is a cordless rotary tool kit with 5 speeds from 5,000-25,000 RPM, a 3,000mAh battery and up to 20-120 minutes of use, depending on the material and the speed applied. A rear power indicator turns red below 30% battery, and a front shadow-free LED light helps visibility during detail tasks. The kit holds 55 accessories in a magnetic holder and case.

Size separates the two examples sharply. The Milwaukee example measures 13.0 inches x 8.5 inches x 3.5 inches and weighs 4.99 Pounds in the spec table. The Fanttik example measures 7.68 inches x 1.34 inches x 1.34 inches and weighs 0.49 Pounds. On weight, both listings state a figure, and the rotary tool example is lighter; on speed, only the rotary tool listing states a range, so no speed comparison is possible.

Grinding Work Against Detail Work

The angle grinder side is built around discs and common grinding accessories, with a spindle made for that accessory family. Kickback protection through the electronic clutch and overload protection are the stated safety features here. The listing leaves speed unstated, so the comparison cannot say how fast the grinder example spins.

The rotary tool side is built around small accessories: the listing names rust removal, blade sharpening, polishing, engraving, and cutting materials like plastic, wood, and soft metal. A 360° rotating magnetic accessory holder in an aluminum alloy case keeps the 55 accessories organized. The listing names no heavy steel work, so the rotary tool example should not be read as a substitute for disc grinding.

Choose the Milwaukee 2880-20 Angle Grinder if

  • Your work is grinding and blending, with discs on a 5/8″-11 spindle.
  • You already run M18 batteries and want a cordless grinder on that system.
  • Kickback protection and overload protection matter to you.
  • A heavier tool suits your work, and disc size matters more than light weight.

Choose the Fanttik F2 PRO Rotary Tool if

  • Your work is detail work: sanding, polishing, engraving and small cutting tasks.
  • You want a full kit, with 55 accessories, a magnetic holder and a case, in one listing.
  • Battery runtime with a visible low-battery warning matters to you.
  • Your materials are plastic, wood and soft metal, the materials the listing names.

Before You Strike an Arc

  • Check the power supply type stated in the listing: the Milwaukee example runs on M18 batteries, and the Fanttik example runs on its 3,000mAh battery.
  • Match the accessory to the job: discs on the 5/8″-11 spindle for the grinder example, and small accessories from the magnetic hub for the rotary tool example.
  • Check the tool on arrival: paddle switch action on the grinder example, and the power indicator and LED light on the rotary tool example.
  • Keep the anti-vibration side handle fitted on the grinder example, and clear the work area before grinding or cutting.

FAQ for welders

Can a rotary tool replace an angle grinder?

Not for the work the grinder example is built around. The rotary tool listing names small tasks and soft materials, while the grinder example is built around discs on a 5/8″-11 spindle. For detail work the rotary tool example fits; for disc grinding the grinder example is the matching side.

What disc sizes does the Milwaukee example take?

The listing names 4-1/2 in. and 5 in. discs. The spindle is 5/8″-11, for use with common grinding accessories.

How long does the Fanttik example run on a charge?

The listing states up to 20-120 minutes of use, depending on the material and the speed applied. A rear power indicator turns red below 30% battery, so the end of a charge is visible.

Does the Milwaukee example come with a battery?

No battery is named as included. The title says tool only, and the listing states compatibility with all M18 batteries, so a battery comes separately from the M18 system.

What warranty term does each listing state?

Neither listing states a term. The Milwaukee listing says only Manufacturer Warranty, and the Fanttik listing states no warranty at all. Treat warranty as unstated for both examples.

Related: best angle grinder for car restoration, air vs electric angle grinder, best wire brush for rotary tool, and the metal fab tools hub.

Scoring, line by line

Both tools are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Milwaukee 2880-20 Angle Grinder 9.6 28 21 20 7 0
Fanttik F2 PRO Rotary Tool 9.4 27 20 21 0 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

More buying guides