Best Aluminum Oxide Blasting Media for Steel (2026)
Five aluminum oxide blasting media for steel compared by grit, pack weight, hardness and finish.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHDURCIR 60 Grit 14 LB9.6/10View on Amazon - 2
Best Fine FinishTITGGI 100 Grit 12 lb9.6/10View on Amazon - 3
Best Bulk BuyIMS #24 Grit 50 lb9.6/10View on Amazon - 4
Best Medium GritHDURCIR 80 Grit 12 LB9.6/10View on Amazon
A steel part comes to the bench with rust, old paint and mill scale on it, and paint will not stick to any of that. The blast cabinet takes it back to bare metal, and the media in the cabinet decides how fast it cuts and what finish it leaves. The best aluminum oxide blasting media for steel is a hard, sharp grit that strips rust and paint and leaves a surface ready for paint, coating or refinishing.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.
Quick picks
- Best Overall HDURCIR 60 Grit 14 LB: 14 lb of 60 grit media for mill scale and paint removal, in a sturdy plastic bucket Check price on Amazon
- Best Fine Finish TITGGI 100 Grit 12 lb: 100 grit for a uniform matte finish before painting, coating or refinishing Check price on Amazon
- Best Bulk Buy IMS #24 Grit 50 lb: 50 lb of extra coarse grit for heavy steel work Check price on Amazon
- Best Medium Grit HDURCIR 80 Grit 12 LB: 12 lb of 80 grit media for cabinets or guns, wet or dry Check price on Amazon
The machines

Aluminum Oxide 14 LBS 60 GRIT Medium to Fine Sand
A 14 lb pack of 60 grit aluminum oxide media for blasting cabinets or guns, for mill scale, paint coating and surface preparation of steel, usable wet or dry.
Pros
- 14 lb, the largest pack of the fine and medium grits here
- 60 grit, medium to fine, for mill scale and paint coating
- Hardness of 9 on the Mohs scale
- Sturdy plastic bucket for easy carrying and use
Cons
- No weight in the spec table, only in the title and bullets
- No warranty term is stated
- No finish type is stated
- No silica content is stated

Aluminum Oxide 12 LBS 80 GRIT Medium to Fine Sand
A 12 lb pack of 80 grit aluminum oxide media for blasting cabinets or guns, for mill scale, paint coating and surface preparation of steel, usable wet or dry.
Pros
- 80 grit, medium to fine, for mill scale and paint coating
- Hardness of 9 on the Mohs scale
- Sturdy plastic bucket for easy carrying and use
- Usable wet or dry
Cons
- 12 lb, less media than the 14 lb 60 grit pack
- No warranty term is stated
- No finish type is stated
- No silica content is stated

Aluminum Oxide - 50 lbs. or 22. 69 kg.
A 50 lb pack of extra coarse 24 grit aluminum oxide media for sandblasters, sandblast guns and blast cabinets, for cleaning and etching steel.
Pros
- 50 lb, the largest pack here
- 24 grit, extra coarse, for heavy removal
- High density angular shapes, per the listing
- Usable wet or dry
Cons
- No hardness figure is stated
- No packaging is stated
- No warranty term is stated
- No finish type is stated

TITGGI 100 Grit Aluminum Oxide Blast Media
A 12 lb pack of 100 grit aluminum oxide media in a white bucket, for rust and paint removal and a uniform matte finish before painting, coating or refinishing.
Pros
- 100 grit for a uniform matte finish
- Hardness of 9 on the Mohs scale
- Lasts 10 times longer than silica, per the listing
- No free silica, 100% recycled
Cons
- No warranty term is stated
- No blasting cabinet or gun is named
- Mill scale removal is not named

Aluminum Oxide - 12 LBS
A 12 lb pack of medium 60 grit aluminum oxide media for sandblasters, sandblast guns and blast cabinets, for cleaning and etching steel.
Pros
- 60 grit, medium, for cleaning and etching steel
- High density angular shapes, per the listing
- Usable wet or dry
- 12 lb pack for sandblasters, sandblast guns and blast cabinets
Cons
- No hardness figure is stated
- No packaging is stated
- No warranty term is stated
- No finish type is stated
Other welders and gear to compare
TITGGI 120 Grit Aluminum Oxide Blast Media for SandblastingCheck price on Amazon
Aluminum Oxide Blast MediaCheck price on Amazon
TITGGI 100 Grit Aluminum Oxide Blast Media for SandblastingCheck price on Amazon
LE LEMATEC Soda Blasting MediaCheck price on Amazon
Glass Bead Media for SandblastingCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Grit | Weight | Use | Wet or dry | Warranty |
|---|---|---|---|---|---|---|
| HDURCIR 60 Grit 14 LB | 9.6/10 | 60 grit | 14 lb | Mill scale, paint, steel prep | Wet or dry | Not stated |
| HDURCIR 80 Grit 12 LB | 9.6/10 | 80 grit | 12 lb | Mill scale, paint, steel prep | Wet or dry | Not stated |
| IMS #24 Grit 50 lb | 9.6/10 | 24 grit, extra coarse | 50 lb | Clean and etch steel | Wet or dry | Not stated |
| TITGGI 100 Grit 12 lb | 9.6/10 | 100 grit | 12 lb | Rust and paint removal, matte finish | Wet or dry | Not stated |
| IMS #60 Grit 12 lb | 9.6/10 | 60 grit, medium | 12 lb | Clean and etch steel | Wet or dry | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026. Grit sizes and weights come from the titles and bullets.
How the picks were scored
The Gear Score weighs performance (cutting power on rust, paint and mill scale, finish quality), build (hardness, grit consistency, packaging), value, safety and warranty. A factor the listing does not state scores zero, which is why every pick here scores zero on safety and warranty: no safety certification and no warranty term is stated for any of the five.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HDURCIR 60 Grit 14 LB | 9.6 | 30 | 21 | 21 | n/a | 0 |
| HDURCIR 80 Grit 12 LB | 9.6 | 30 | 21 | 20 | n/a | 0 |
| IMS #24 Grit 50 lb | 9.6 | 29 | 20 | 22 | n/a | 0 |
| TITGGI 100 Grit 12 lb | 9.6 | 30 | 20 | 20 | n/a | 0 |
| IMS #60 Grit 12 lb | 9.6 | 29 | 20 | 20 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.
Buying guide: the best aluminum oxide blasting media for steel
Grit size
Grit decides the cut. The extra coarse 24 grit is the heaviest cut here, for steel with heavy rust and scale. The 60 and 80 grit media sit in the middle, for mill scale, paint coating and surface preparation of steel. The 100 grit is the finest here, for a uniform matte finish before painting, coating or refinishing.
Weight and packaging
Media comes by the pound, and the packs here run from 12 lb to 50 lb. The TITGGI and HDURCIR listings name a bucket: a white bucket for the TITGGI and a sturdy plastic bucket for the HDURCIR packs. The Industrial Mineral Supply listings name no packaging, so check the listing before counting on a bucket.
Wet or dry
Every listing here says its media can be used wet or dry. The listings do not state which suits a given cabinet, so match the media to the cabinet and gun on hand.
Steel prep before paint
Paint needs a clean, etched surface. The TITGGI listing names metal surface preparation before painting, coating or refinishing, with a uniform matte finish. The HDURCIR listings name surface preparation of stainless steel, aluminum and wood, plus etching glass. The Industrial Mineral Supply listings name cleaning and etching steel for a metal finish.
Use as directed. Blasting throws dust and grit, so wear a respirator, eye protection and gloves, and keep the cabinet door shut while blasting. The TITGGI listing states no free silica in its media. Never blast a surface that may hold lead paint or other hazards without checking the rules for it.
Before You Strike an Arc
- Check the grit before loading the cabinet: 24 grit for heavy rust and scale, 60 or 80 grit for mill scale and paint, 100 grit for a matte finish before paint.
- Check the pack on arrival: the TITGGI listing names a white bucket, and the HDURCIR listings name a sturdy plastic bucket.
- Match the media to the cabinet or gun: the HDURCIR listings name blasting cabinets or blasting guns, and the Industrial Mineral Supply listings name sandblasters, sandblast guns and blast cabinets.
- Plan the job around the pack size: the packs here run from 12 lb to 50 lb, and the 50 lb pack is the extra coarse 24 grit.
FAQ for welders
What is blasting media?
Blasting media is the grit fed through a blasting cabinet or gun to clean and etch a surface. The media here is brown fused aluminum oxide, with a hardness of 9 on the Mohs scale, for removing rust, paint and mill scale from steel.
What is media blasting on a car?
On a car it means stripping paint and rust from steel panels and parts back to bare metal before repair or paint. The listings here name rust and paint removal and metal surface preparation before painting, coating or refinishing.
How do you choose blasting media?
Match the grit to the job: extra coarse 24 grit for heavy rust and scale, 60 or 80 grit for mill scale and paint, and 100 grit for a uniform matte finish before paint. Then match the pack size to the job: the packs here run from 12 lb to 50 lb.
How do you clean blasting media?
The listings here do not state how to clean used media. The TITGGI listing says its media is 100% recycled, will not break down as fast as glass blasting media, and lasts 10 times longer than silica.
What size compressor do you need for media blasting?
The listings here do not state a compressor size. They name blasting cabinets, blasting guns, sandblasters and sandblast guns as the equipment, so match the media to the cabinet or gun on hand and check its air requirements in its own listing.
Related: best blasting media, garnet vs aluminum oxide blasting media, glass bead vs aluminum oxide blasting media, sandblasting vs wire wheel for rust removal and the metal fab tools hub.




