Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Bolt Cutters 18 Inch (2026)

Five 18-inch bolt cutters compared on jaw steel, edge hardness, rated capacity, handles and jaw adjustment, from what each listing states.

Best Bolt Cutters 18 Inch (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1OTLOOMTBT 18-Inch Bolt CutterBest OverallOTLOOMTBT 18-Inch Bolt Cutter9.7/10View on Amazon
  2. 2GRENPRO 18-Inch Bolt CutterBest Edge HardnessGRENPRO 18-Inch Bolt Cutter9.6/10View on Amazon
  3. 3WORKPRO Foldable 18-InchBest FoldingWORKPRO Foldable 18-Inch9.6/10View on Amazon
  4. 4MAXPOWER 18-Inch Bolt CutterBest Rust CoatingMAXPOWER 18-Inch Bolt Cutter9.6/10View on Amazon
  5. 5HOUSERAN 18-Inch Bolt CutterBest Simple PickHOUSERAN 18-Inch Bolt Cutter9.5/10View on Amazon

A padlock hasp rusted shut, a length of chain that needs shortening, or a bent bolt that will not back out: that is the work an 18-inch bolt cutter earns its keep on. This guide compares five contenders for best bolt cutters 18 inch on jaw steel, edge hardness, cutting capacity, handles and adjustment, using only what each Amazon listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall OTLOOMTBT 18-Inch Bolt Cutter: Forged CR-MO jaws, HRC 56-60 edges, rated 5/16 in at HRC 25 Check price on Amazon
  • Best Edge Hardness GRENPRO 18-Inch Bolt Cutter: CRV blade at 58-62 HRC with anti-slip TPE grips, 3.24 lb Check price on Amazon
  • Best Folding WORKPRO Foldable 18-Inch: Foldable 18-inch handles, HRC 63-65 blades, 5/16 in at HRC 31 Check price on Amazon
  • Best Rust Coating MAXPOWER 18-Inch Bolt Cutter: Cr-Mo jaws with black phosphating, 6 mm rated capacity Check price on Amazon
  • Best Simple Pick HOUSERAN 18-Inch Bolt Cutter: CR-V steel with adjustable limiting screw, 3.28 lb Check price on Amazon

The machines

18 Inch Bolt Cutter, Forged CR-MO Steel Jaws

18 Inch Bolt Cutter, Forged CR-MO Steel Jaws

OTLOOMTBT9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18-inch bolt cutter with forged chrome molybdenum jaws, HRC 56-60 edges and a rated capacity by material hardness.

Pros

  • Only listing here that rates capacity by hardness: 5/16 in at HRC 25, 13/64 in at HRC 40
  • Forged chrome molybdenum jaws with HRC 56-60 heat-treated edges
  • Front adjustment bolts for jaw-gap adjustment
  • Lowest stated weight here at 3.04 lb

Cons

  • No warranty term is stated
  • Not intended for wire rope, electrical cables or sheet metal
  • Adjustment does not repair damaged edges, per the listing
  • Designed for two-handed operation only
18 Inch Heavy Duty Bolt Cutter, Chrome Vanadium

18 Inch Heavy Duty Bolt Cutter, Chrome Vanadium

GRENPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18-inch chrome vanadium bolt cutter with 58-62 HRC blades and a yellow and black anti-slip TPE grip.

Pros

  • CRV blade heat-treated to 58-62 HRC
  • Yellow and black bi-material TPE grip for non-slip handling
  • Lever-fulcrum structure for labor-saving cutting
  • States blade hardness (58-62 HRC) and body hardness (38-45 HRC)

Cons

  • No warranty term is stated
  • No rated cutting capacity stated
  • 3.24 lb is heavier than the OTLOOMTBT
WORKPRO 18-Inch Foldable Bolt Cutter

WORKPRO 18-Inch Foldable Bolt Cutter

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A foldable 18-inch bolt cutter with chrome vanadium jaws at HRC 63-65 and capacity rated by material hardness.

Pros

  • Hardest stated edges here at HRC 63-65
  • Folding handles for compact carry and storage
  • Capacity rated by hardness: 1/4 in below HRC 48, 5/16 in below HRC 31
  • Tri-material anti-slip rubber grips on tubular steel handles

Cons

  • No warranty term is stated
  • Heaviest here at 3.86 lb
  • No rust prevention coating stated
MAXPOWER Heavy Duty Bolt Cutter 18 Inch

MAXPOWER Heavy Duty Bolt Cutter 18 Inch

MAXPOWER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18-inch chrome molybdenum bolt cutter with induction-hardened jaws, black phosphating and a 6 mm rated capacity.

Pros

  • Black phosphating on the blades for rust and corrosion prevention
  • Induction-hardened forged Cr-Mo jaws
  • 18 in (450 mm) arms with compound cutting action
  • Rated 6 mm (1/4 in) cutting capacity

Cons

  • No warranty term is stated
  • No weight stated
  • Lifespan claim of 5 times others names no comparison
  • No edge hardness number stated
18 Inch CR-V Heavy Duty Bolt Cutters

18 Inch CR-V Heavy Duty Bolt Cutters

HOUSERAN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18-inch CR-V steel bolt cutter with an adjustable limiting screw and anti-slip comfort grips.

Pros

  • Adjustable limiting screw for controlled cuts
  • CR-V steel build for padlocks, chains, fences and wire
  • Anti-slip comfort grip handles
  • Lever mechanism for effort-saving cutting

Cons

  • No warranty term is stated
  • No edge hardness or rated capacity stated
  • Fewest stated specs of the five
  • No cutting capacity stated for the padlock work it advertises

Spec sheet comparison

Cutter Gear Score Jaw steel Edge hardness Rated capacity Weight
OTLOOMTBT 18-Inch Bolt Cutter 9.7/10 Chrome molybdenum HRC 56-60 5/16 in at HRC 25 3.04 lb
GRENPRO 18-Inch Bolt Cutter 9.6/10 Chrome vanadium HRC 58-62 Not stated 3.24 lb
WORKPRO Foldable 18-Inch 9.6/10 Chrome vanadium HRC 63-65 5/16 in at HRC 31 3.86 lb
MAXPOWER 18-Inch Bolt Cutter 9.6/10 Chrome molybdenum Induction hardened 1/4 in (6 mm) Not stated
HOUSERAN 18-Inch Bolt Cutter 9.5/10 CR-V steel Not stated Not stated 3.28 lb

Ratings in this table are the makers’ own claims taken from each product page (23 October 2026).

Buying guide: best bolt cutters 18 inch

Jaw steel and edge hardness

Three cutters here state chrome vanadium jaws: GRENPRO at 58-62 HRC, WORKPRO at 63-65 HRC, and HOUSERAN as CR-V steel with no hardness stated. Two state chrome molybdenum: OTLOOMTBT at 56-60 HRC and MAXPOWER with induction-hardened Cr-Mo. Harder edges hold up longer on hardened stock, but the number only means something next to a rated capacity, which some listings give and others do not.

Cutting capacity by material hardness

OTLOOMTBT rates its cutter at 5/16 inch (8 mm) for stock at HRC 25 or below and 13/64 inch (5.1 mm) at HRC 40 or below. WORKPRO rates 1/4 inch (6 mm) at HRC below 48 and 5/16 inch (8 mm) at HRC below 31. MAXPOWER rates 6 mm (1/4 inch) with no hardness condition. GRENPRO and HOUSERAN state no rated capacity, so match the job to the listings that do. For the alternative, see bolt cutters vs hacksaw for metal.

Handles and leverage

All five use compound leverage, and all five list anti-slip grips: TPE on the GRENPRO, contoured grips on the OTLOOMTBT, PVC on the MAXPOWER and tri-material rubber on the WORKPRO. The WORKPRO folds its long handles for carry and storage. For smaller work, see best hand held bolt cutters.

Jaw adjustment

Two cutters let you adjust the jaws. The OTLOOMTBT has front adjustment bolts for jaw-gap adjustment, with instructions to retighten the fixing nuts afterward, and notes that adjustment does not repair damaged edges. The HOUSERAN has an adjustable limiting screw for controlled cuts.

Weight, size and what not to cut

Stated weights run from 3.04 lb (OTLOOMTBT) to 3.86 lb (WORKPRO), with GRENPRO at 3.24 lb and HOUSERAN at 3.28 lb; MAXPOWER states no weight. The WORKPRO lists folded dimensions of 10.43 by 6.69 by 2.17 inches. The OTLOOMTBT listing says it is not intended for wire rope, electrical cables or sheet metal.

Use as directed. Wear eye protection when cutting, keep fingers clear of the jaws, and cut within the rated capacity where the listing states one. Cut-off ends can fly, so clear the area and point the jaws away from people.

Before You Strike an Arc

  • Check jaw alignment and edge clearance on arrival; the OTLOOMTBT listing includes front adjustment bolts and says to retighten the fixing nuts after adjusting.
  • Match the stock to the rated capacity before the first cut: OTLOOMTBT and WORKPRO both rate capacity by material hardness.
  • Note what the tool is not for: the OTLOOMTBT listing rules out wire rope, electrical cables and sheet metal.
  • Confirm the grip suits the work: tri-material rubber on the WORKPRO, TPE on the GRENPRO, PVC on the MAXPOWER.

FAQ for welders

Can bolt cutters cut screws?

The GRENPRO listing names screws, chains, wires and rivets as its work. The OTLOOMTBT listing covers bolts, fence wire, steel rods and nails within the rated capacity.

What is the cutting capacity of an 18-inch bolt cutter?

It varies by listing and material hardness. OTLOOMTBT rates 5/16 inch (8 mm) at HRC 25 or below and 13/64 inch (5.1 mm) at HRC 40 or below; WORKPRO rates 1/4 inch (6 mm) below HRC 48 and 5/16 inch (8 mm) below HRC 31; MAXPOWER rates 6 mm (1/4 inch).

What steel are the jaws made from?

GRENPRO, WORKPRO and HOUSERAN list chrome vanadium (CRV) steel; OTLOOMTBT and MAXPOWER list chrome molybdenum (Cr-Mo). Stated edge hardness runs from HRC 56-60 to HRC 63-65 where stated.

Do any of these bolt cutters fold?

The WORKPRO is a foldable 18-inch cutter; its spec table lists folded dimensions of 10.43 by 6.69 by 2.17 inches. The other four are fixed-handle cutters.

How heavy is an 18-inch bolt cutter?

The listings here state 3.04 lb (OTLOOMTBT), 3.24 lb (GRENPRO), 3.28 lb (HOUSERAN) and 3.86 lb (WORKPRO); MAXPOWER states no weight.

Related: best bolt cutters, best hand held bolt cutters, bolt cutters vs hacksaw for metal, and the metal fab tools hub.

Scoring, line by line

Each cutter is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Bolt cutters have no electrical safety listing to state, so every cutter here scores zero on that criterion; the ranking comes from the other four. None of the five listings states a warranty term.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
OTLOOMTBT 18-Inch Bolt Cutter 9.7 32 21 21 n/a 0
GRENPRO 18-Inch Bolt Cutter 9.6 30 21 21 n/a 0
WORKPRO Foldable 18-Inch 9.6 30 21 20 n/a 0
MAXPOWER 18-Inch Bolt Cutter 9.6 29 20 20 n/a 0
HOUSERAN 18-Inch Bolt Cutter 9.5 27 19 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Metal Fab Tools ·

Best Bolt Cutter for Wire Shelving (2026)

Five bolt cutters for trimming wire shelving, compared on length, blade hardness, cutting capacity and grip, and scored from what each listing states.

Metal Fab Tools ·

Bolt Cutter Sizes and Which to Buy

Bolt cutter sizes run from a compact 8-inch cutter for light stock to a 24-inch cutter for thick bolts, and the right size is…