Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

2×42 vs 2×72 Belt Grinder: Which One Should You Buy?

The 2x42 zirconia belt packs and the 2x72 grinder are compared here on belt size, grit, power, grinding methods and what each listing states.

2×42 vs 2×72 Belt Grinder: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1JLD Professional Belt Grinder SanderJLD Professional Belt Grinder Sander9.5/10View on Amazon
  2. 210 Pack 2x42 Sanding Belts 40 Grit Zirconia10 Pack 2x42 Sanding Belts 40 Grit Zirconia9.5/10View on Amazon
  3. 310 Pcs 2x42 60 Grit Zirconia Sanding Belts10 Pcs 2x42 60 Grit Zirconia Sanding Belts9.5/10View on Amazon

Verdict. Pick the 2×42 belts when the shop already runs a 2 x 42 inch grinder and the job is shaping, smoothing or weld blending with zirconia belts. Pick the 2×72 grinder when the shop needs a complete machine with variable speed and grinding kits for curved, flat and irregular work.

A blade blank waits on the bench, an edge needs shaping, and a weld bead needs blending back to the surface. That is the job behind 2×42 vs 2×72 belt grinder, and the choice turns on belt size, the machine behind the belt, and the grit on hand.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The machines

JLD Professional Belt Grinder Sander

JLD Professional Belt Grinder Sander

Jinlida9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 x 72 inch belt grinder with a 1500W motor, a 2.2kW VFD listed from 0 to 2800 rpm, 2 grinding kits and 3 included belts in 60-grit, 100-grit and 180-grit.

Pros

  • 1500W pure copper motor with a 2.2kW VFD, listed from 0 to 2800 rpm
  • 2 grinding kits give circular, flat and arc grinding in one machine
  • 3 included belts cover coarse, medium and fine work in 60-grit, 100-grit and 180-grit
  • Thickened steel frame in one-piece molding with powder-coated anti-rust treatment

Cons

  • No warranty term is stated in the listing
  • No weight is stated in the listing
  • No safety certification is stated in the listing
  • The claimed 30% efficiency increase names no standard model to check it against
10 Pack 2x42 Sanding Belts 40 Grit Zirconia

10 Pack 2x42 Sanding Belts 40 Grit Zirconia

RUIHONGV9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 2 x 42 inch, 40 grit zirconia sanding belts for heavy grinding and rapid material removal on metal, stainless steel and iron.

Pros

  • 40 grit zirconia alumina abrasive for heavy grinding and rapid material removal
  • Open-coat construction is listed as preventing clogging on welds, rust and thick coatings
  • Reinforced cloth backing withstands high heat and tension, with bi-directional seams
  • 10 belts in the pack for knife making, rust removal and metal grinding

Cons

  • Belts only: no grinder, motor or speed control is included
  • No warranty term is stated in the listing
  • Fits only machines that take 2 inch by 42 inch belts
  • 40 grit is coarse: the listing gives no finer grit in this pack
10 Pcs 2x42 60 Grit Zirconia Sanding Belts

10 Pcs 2x42 60 Grit Zirconia Sanding Belts

RUIHONGV9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 2 x 42 inch, 60 grit zirconia sanding belts for smoothing after coarse grinding, removing scratches and preparing surfaces for finer grits.

Pros

  • 60 grit zirconia for smoothing after coarse grinding and removing scratches
  • Self-sharpening grains are listed as cutting faster and lasting longer than conventional aluminum oxide
  • Reinforced cloth backing withstands high heat and tension, with bi-directional seams
  • 10 belts in the pack for metal grinding, toolmaking, wood shaping and surface prep

Cons

  • Belts only: no grinder, motor or speed control is included
  • No warranty term is stated in the listing
  • Fits only machines that take 2 inch by 42 inch belts
  • 60 grit is listed for smoothing after coarse grinding, not heavy stock removal: the 40 grit pack is the coarse option here

Other welders and gear to compare

2×42 vs 2×72 belt grinder: side by side

JLD 2×72 Belt Grinder RUIHONGV 2×42 40 Grit Sanding Belts RUIHONGV 2×42 60 Grit Sanding Belts
Belt size 2 x 72 inch 2 x 42 inch 2 x 42 inch
Grit 60-grit, 100-grit, 180-grit 40 grit 60 grit
Belts in the box 3 sanding belts 10 belts 10 belts
Motor 1500W pure copper motor Not stated Not stated
Speed control 2.2kW VFD, 0 to 2800 rpm Not stated Not stated
Grinding kits 2 grinding kits Not stated Not stated
Grinding methods Circular, flat and arc grinding Not stated Not stated
Frame and backing Thickened steel frame, powder-coated Reinforced cloth backing Reinforced cloth backing
Product dimensions 30.0 inches x 24.0 inches x 18.0 inches Not stated Not stated
Warranty Not stated Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (13 November 2026). The belt listings state no motor, no speed control and no warranty term, and the grinder listing states no warranty term, so those cells read Not stated rather than a guess.

Belt size and grinding surface

The RUIHONGV belts are 2 x 42 inch belts, made for 2 x 42 inch belt grinders and belt sanders. The JLD machine takes a 2 x 72 inch belt. Belt size is the split between the sides here: the 2×42 listings are consumable belts, while the 2×72 listing is a complete machine with belts included.

Power and speed

The JLD grinder lists a 1500W pure copper motor and a 2.2kW VFD with stepless speed adjustment from 0 to 2800 rpm. The maker claims grinding efficiency is increased by 30% compared to standard models. The belt listings state no motor and no speed range, since a belt pack carries no motor of its own, so power cannot be compared across the sides: the 1500W figure describes the JLD machine only.

Grit and finish

One RUIHONGV pack is 60 grit zirconia, listed for smoothing after coarse grinding, removing scratches and preparing surfaces for finer grits. The other pack is 40 grit zirconia, listed for heavy grinding and rapid material removal on metal, stainless steel and iron. The JLD machine includes 3 sanding belts: 60-grit for coarse grinding and deburring, 100-grit for medium grinding and shaping, and 180-grit for fine polishing and refining.

Grinding methods and setup

The JLD listing includes 2 grinding kits and 3 grinding methods: circular grinding for curved workpieces, flat grinding for plates and profiles, and arc grinding for irregular structures. It works in vertical and horizontal operation. The belt listings state no grinding kits and no operating positions.

What is in the box

Each RUIHONGV pack includes 10 belts of its stated grit. The JLD machine includes 3 sanding belts. The grinder listing names the 2 grinding kits and the 3 belts as its included accessories.

Build and frame

The RUIHONGV belts use a reinforced cloth backing and bi-directional seams, listed as withstanding high heat and tension with smooth tracking. The 40 grit pack adds an open-coat construction listed as preventing clogging. The JLD machine uses a thickened steel frame in one-piece molding with a powder-coated anti-rust treatment, and the maker lists it as vibration-free during prolonged heavy-duty operation. The JLD listing gives product dimensions of 30.0 inches x 24.0 inches x 18.0 inches. The listings state no weight for any of the picks, so weight cannot be compared here.

Choose the 2×42 belts if

  • The shop already has a 2 x 42 inch belt grinder and needs fresh belts.
  • The job is blade shaping, bevel grinding, weld blending or rust removal.
  • Heavy stock removal calls for 40 grit zirconia, or smoothing after coarse grinding calls for 60 grit.
  • A 10-belt pack suits daily use in the shop or garage.

Choose the 2×72 grinder if

  • The shop needs a complete belt grinder rather than belts alone.
  • Variable speed matters, with the VFD listed from 0 to 2800 rpm.
  • Curved, flat and irregular work all pass through the same machine.
  • Coarse, medium and fine work should run from the included 60-grit, 100-grit and 180-grit belts.

Before You Strike an Arc

  • Wear eye and face protection, and clamp the work before grinding.
  • Keep gloves away from rotating parts, and keep guards in place.
  • Check the belt tracking and the fit of the belt on the machine before switching on.
  • Clear flammable material from the grinding area, and keep an extinguisher close.

FAQ for welders

Which belt grinder size suits knife making?

The 2×42 belt listings name knife making, blade shaping and bevel grinding directly. The 2×72 grinder listing names metal and wood grinding with circular, flat and arc methods, and it does not name knife making.

Can the 2×42 belts fit a 2×72 grinder?

The listings state the belts fit 2 x 42 inch belt grinders and belt sanders, and they state no other fitment. Check the machine’s stated belt size before buying, since no listing here states that a 2 x 42 inch belt fits a 2 x 72 inch machine.

What grit should start work on a blade blank?

For heavy grinding and rapid material removal, the listings point to 40 grit zirconia. For smoothing after coarse grinding, the listings point to 60 grit zirconia. The JLD machine covers the range in one box with 60-grit, 100-grit and 180-grit belts for coarse, medium and fine work.

Does the JLD grinder run at variable speed?

Yes. The listing states a 2.2kW VFD with stepless speed adjustment from 0 to 2800 rpm, driven by a 1500W pure copper motor. The belt listings state no speed control, since belts carry no motor.

Do any of the picks state a warranty?

No. None of the listings in this comparison states a warranty term, so the warranty cells read Not stated. The same applies to weight and safety listings: none of the listings states them, so they cannot be compared here.

Related: bench grinder vs belt grinder for metal, belt grinder vs belt sander, belt grinder vs angle grinder and metal belt grinder vs disc sander.

Scoring, line by line

The picks are scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
JLD 2×72 Belt Grinder 9.5 32 21 20 0 0
RUIHONGV 2×42 40 Grit Sanding Belts 9.5 29 21 21 0 0
RUIHONGV 2×42 60 Grit Sanding Belts 9.5 28 21 21 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides